chris@skywalker:~$ dmesg | grep saa
[   53.645825] saa7130/34: v4l2 driver version 0.2.14 loaded
[   53.645880] saa7134[0]: found at 0000:02:02.0, rev: 1, irq: 137, latency: 64, mmio: 0xfeaffc00
[   53.645887] saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i DVB-T + PAL [card=50,autodetected]
[   53.645897] saa7134[0]: board init: gpio is c806000
[   53.788000] saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92
[   53.788009] saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff ff
[   53.788017] saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff ff
[   53.788024] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   53.788031] saa7134[0]: i2c eeprom 40: ff 16 00 c0 86 3c 01 01 ff ff ff ff ff ff ff ff
[   53.788038] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   53.788045] saa7134[0]: i2c eeprom 60: 0c 22 17 44 02 8e df 77 ff ff ff ff ff ff ff ff
[   53.788052] saa7134[0]: i2c eeprom 70: 00 30 8d 14 45 88 ff ff 74 90 ff ff ff ff ff ff
[   53.863941] tda9887 0-0043: chip found @ 0x86 (saa7134[0])
[   53.872228] saa7134[0]: registered device video0 [v4l2]
[   53.872256] saa7134[0]: registered device vbi0
[   53.882653] saa7134 ALSA driver for DMA sound loaded
[   53.882677] saa7134[0]/alsa: saa7134[0] at 0xfeaffc00 irq 137 registered as card -1
[ 6931.067750] saa7134[0]/irq[10,1652142]: r=0x20 s=0x10 PE
[ 6931.067755] saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit