Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\Tomoko>smartctl -a /dev/hdb smartctl version 5.36 [i686-mingw32-xp] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Maxtor DiamondMax Plus 8 family Device Model: Maxtor 6E040L0 Serial Number: E1HXAJDE Firmware Version: NAR61590 User Capacity: 41,110,142,976 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0 Local Time is: Tue Dec 05 23:09:47 2006 GMTST SMART support is: Available - device has SMART capability. Enabled status cached by OS, trying SMART RETURN STATUS cmd. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: FAILED! Drive failure expected in less than 24 hours. SAVE ALL DATA. See vendor-specific Attribute list for failed Attributes. General SMART Values: Offline data collection status: (0x85) Offline data collection activity was aborted by an interrupting command f rom host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (1021) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off supp ort. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 17) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE 3 Spin_Up_Time 0x0027 225 219 063 Pre-fail Always - 11059 4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 643 5 Reallocated_Sector_Ct 0x0033 020 001 063 Pre-fail Always FAILI NG_NOW 1177 6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0 7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0 8 Seek_Time_Performance 0x0027 253 244 187 Pre-fail Always - 58121 9 Power_On_Minutes 0x0032 197 197 000 Old_age Always - 986h+23m 10 Spin_Retry_Count 0x002b 251 250 157 Pre-fail Always - 2 11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 252 252 000 Old_age Always - 668 192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 497 193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 2474 194 Temperature_Celsius 0x0032 253 253 000 Old_age Always - 42 195 Hardware_ECC_Recovered 0x000a 249 246 000 Old_age Always - 46611 196 Reallocated_Event_Count 0x0008 001 001 000 Old_age Offline - 4515 197 Current_Pending_Sector 0x0008 023 001 000 Old_age Offline - 1164 198 Offline_Uncorrectable 0x0008 001 001 000 Old_age Offline - 27101 199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age Offline - 0 200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 249 000 Old_age Always - 6 202 TA_Increase_Count 0x000a 001 001 000 Old_age Always - 580 203 Run_Out_Cancel 0x000b 248 001 180 Pre-fail Always In_th e_past 3176 204 Shock_Count_Write_Opern 0x000a 246 001 000 Old_age Always - 9 205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age Always - 0 207 Spin_High_Current 0x002a 251 250 000 Old_age Always - 2 208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0 209 Offline_Seek_Performnce 0x0024 251 181 000 Old_age Offline - 0 99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 SMART Error Log Version: 1 Warning: ATA error count 60487 inconsistent with error log pointer 5 ATA Error Count: 60487 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 60487 occurred at disk power-on lifetime: 18327 hours (763 days + 15 hours ) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 65 9f e4 16 f0 Error: UNC 101 sectors at LBA = 0x0016e49f = 1500319 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 80 9f e4 16 f0 00 03:00:40.128 READ DMA c8 00 80 1f e4 16 f0 00 03:00:40.128 READ DMA c8 00 80 9f e3 16 f0 00 03:00:40.128 READ DMA c8 00 80 1f e3 16 f0 00 03:00:40.112 READ DMA c8 00 80 9f e2 16 f0 00 03:00:40.112 READ DMA Error 60486 occurred at disk power-on lifetime: 18327 hours (763 days + 15 hours ) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 13 9f 83 05 f0 Error: UNC 19 sectors at LBA = 0x0005839f = 361375 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 80 9f 83 05 f0 00 02:56:34.896 READ DMA c8 00 80 1f 83 05 f0 00 02:56:34.896 READ DMA c8 00 80 9f 82 05 f0 00 02:56:34.896 READ DMA c8 00 80 1f 82 05 f0 00 02:56:34.704 READ DMA c8 00 80 9f 81 05 f0 00 02:56:34.704 READ DMA Error 60485 occurred at disk power-on lifetime: 18327 hours (763 days + 15 hours ) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 6b 9f d4 02 f0 Error: UNC 107 sectors at LBA = 0x0002d49f = 185503 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 80 9f d4 02 f0 00 02:54:46.880 READ DMA c8 00 80 1f d4 02 f0 00 02:54:46.400 READ DMA c8 00 80 9f d3 02 f0 00 02:54:46.400 READ DMA c8 00 80 1f d3 02 f0 00 02:54:46.384 READ DMA c8 00 80 9f d2 02 f0 00 02:54:46.384 READ DMA Error 60484 occurred at disk power-on lifetime: 18325 hours (763 days + 13 hours ) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 51 13 af d4 02 f0 Error: AMNF 19 sectors at LBA = 0x0002d4af = 185519 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 18 af d4 02 f0 00 00:25:27.104 READ DMA c8 00 01 00 00 00 f0 00 00:25:27.072 READ DMA c8 00 80 e7 d4 02 f0 00 00:25:26.912 READ DMA c8 00 18 af d4 02 f0 00 00:25:25.696 READ DMA c8 00 01 00 00 00 f0 00 00:25:25.680 READ DMA Error 60483 occurred at disk power-on lifetime: 18325 hours (763 days + 13 hours ) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 51 13 af d4 02 f0 Error: AMNF 19 sectors at LBA = 0x0002d4af = 185519 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 18 af d4 02 f0 00 00:25:25.696 READ DMA c8 00 01 00 00 00 f0 00 00:25:25.680 READ DMA c8 00 20 c7 d4 02 f0 00 00:25:25.440 READ DMA c8 00 10 af d4 02 f0 00 00:25:24.240 READ DMA c8 00 28 bf d4 02 f0 00 00:25:22.864 READ DMA SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. C:\Documents and Settings\Tomoko>