Linux version 2.6.13.2-chw-3 (root@dev.mysettopbox.tv) (gcc version 3.3.6 (Debian 1:3.3.6-5)) #1 SMP Wed Sep 21 08:15:54 PDT 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000ff77000 (usable) BIOS-e820: 000000000ff77000 - 000000000ff79000 (ACPI NVS) BIOS-e820: 000000000ff79000 - 0000000010000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 255MB LOWMEM available. found SMP MP-table at 000fe710 On node 0 totalpages: 65399 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61303 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. DELL GX240 detected: force use of acpi=ht ACPI: RSDP (v000 DELL ) @ 0x000fd560 ACPI: RSDT (v001 DELL GX240 0x00000008 ASL 0x00000061) @ 0x000fd574 ACPI: FADT (v001 DELL GX240 0x00000008 ASL 0x00000061) @ 0x000fd5a8 ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffe5f92 ACPI: MADT (v001 DELL GX240 0x00000008 ASL 0x00000061) @ 0x000fd61c ACPI: BOOT (v001 DELL GX240 0x00000008 ASL 0x00000061) @ 0x000fd678 ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:1 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: DELL Product ID: Opti GX240 APIC at: 0xFEE00000 I/O APIC #1 Version 32 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 1 Allocating PCI resources starting at 10000000 (gap: 10000000:eec00000) Built 1 zonelists Kernel command line: auto BOOT_IMAGE=Linux ro root=301 splash=silent apm=power-off nomce bootsplash: silent mode. mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 PID hash table entries: 1024 (order: 10, 16384 bytes) Detected 1694.741 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 253140k/261596k available (3064k kernel code, 7860k reserved, 1213k data, 216k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3393.78 BogoMIPS (lpj=6787571) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 256K CPU: Hyper-Threading is disabled CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000 00000000 00000000 mtrr: v2.0 (20020519) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel(R) Pentium(R) 4 CPU 1.70GHz stepping 02 Total of 1 processors activated (3393.78 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=0 Brought up 1 CPUs checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 68k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfbe5e, last bus=3 PCI: Using configuration type 1 ACPI: Subsystem revision 20050408 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fe2d0 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xe2f4, dseg 0x40 PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver SCSI subsystem initialized PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 PCI: Using IRQ router PIIX/ICH [8086/2440] at 0000:00:1f.0 PCI->APIC IRQ transform: 0000:00:1f.2[D] -> IRQ 19 PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 17 PCI->APIC IRQ transform: 0000:00:1f.4[C] -> IRQ 18 PCI->APIC IRQ transform: 0000:00:1f.5[B] -> IRQ 17 PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16 PCI->APIC IRQ transform: 0000:02:0c.0[A] -> IRQ 18 PCI->APIC IRQ transform: 0000:03:08.0[A] -> IRQ 16 PCI->APIC IRQ transform: 0000:03:09.0[A] -> IRQ 17 pnp: 00:00: ioport range 0x800-0x8df could not be reserved pnp: 00:00: ioport range 0xc00-0xc7f has been reserved PCI: Bridge: 0000:00:01.0 IO window: e000-efff MEM window: ff800000-ff9fffff PREFETCH window: f0000000-f7ffffff PCI: Bridge: 0000:02:08.0 IO window: disabled. MEM window: ff700000-ff7fffff PREFETCH window: e8000000-efffffff PCI: Bridge: 0000:00:1e.0 IO window: d000-dfff MEM window: ff500000-ff7fffff PREFETCH window: e8000000-efffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 Simple Boot Flag at 0x7a set to 0x1 Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) JFS: nTxBlock = 1979, nTxLock = 15839 SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem Initializing Cryptographic API vesafb: framebuffer at 0xf0000000, mapped to 0xd0980000, using 3750k, total 65536k vesafb: mode is 800x600x16, linelength=1600, pages=67 vesafb: protected mode interface info at c000:5242 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 45842 bytes,<6>...found (800x600, 21500 bytes, v3). Console: switching to colour frame buffer device 75x24 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found PNP: PS/2 controller doesn't have AUX irq; using default 0xc PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 112 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2: IDE controller at PCI slot 0000:00:1f.1 ICH2: chipset revision 18 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: Maxtor 6L250R0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: SAMSUNG CD-ROM SC-148C, ATAPI CD/DVD-ROM drive hdc: Disabling (U)DMA for SAMSUNG CD-ROM SC-148C (blacklisted) ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 490234752 sectors (251000 MB) w/16384KiB Cache, CHS=30515/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 hdc: ATAPI 48X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.20 libata version 1.12 loaded. mice: PS/2 mouse device common for all mice md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid10 personality registered as nr 9 md: raid5 personality registered as nr 4 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 2131.000 MB/sec raid5: using function: pIII_sse (2131.000 MB/sec) raid6: int32x1 437 MB/s raid6: int32x2 600 MB/s raid6: int32x4 395 MB/s raid6: int32x8 386 MB/s raid6: mmxx1 1403 MB/s raid6: mmxx2 1754 MB/s raid6: sse1x1 876 MB/s raid6: sse1x2 1013 MB/s raid6: sse2x1 1354 MB/s raid6: sse2x2 1778 MB/s raid6: using algorithm sse2x2 (1778 MB/s) md: raid6 personality registered as nr 8 md: multipath personality registered as nr 7 md: faulty personality registered as nr 10 md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 3.38 device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 6, 262144 bytes) TCP bind hash table entries: 16384 (order: 5, 196608 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered TCP bic registered NET: Registered protocol family 1 input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 15 Using IPI Shortcut mode Suspend2 Core. Suspend2 Compression Driver loading. Suspend2 Encryption Driver loading. Suspend2 Swap Writer loading. Suspend2 FileWriter loading. md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). Suspend2: Initrd lacks echo > /proc/software_suspend/do_resume. EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. (fs/jbd/recovery.c, 255): journal_recover: JBD: recovery, exit status 0, recovered transactions 1981 to 2079 (fs/jbd/recovery.c, 257): journal_recover: JBD: Replayed 1422 and revoked 0/12 blocks EXT3-fs: hda1: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 109456 ext3_orphan_cleanup: deleting unreferenced inode 109454 EXT3-fs: hda1: 2 orphan inodes deleted EXT3-fs: recovery complete. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Trying to move old root to /initrd ... okay Freeing unused kernel memory: 216k freed Suspend2 2.2-rc7: You need to use a resume2= command line parameter to tell Suspend2 where to look for an image. Suspend2 2.2-rc7: Resume2 parameter is empty. Suspending will be disabled. Suspend2 2.2-rc7: Missing or invalid storage location (resume2= parameter). Please correct and rerun lilo (or equivalent) before suspending. Adding 1180768k swap on /dev/hda2. Priority:-1 extents:1 EXT3 FS on hda1, internal journal usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.3 PCI: Setting latency timer of device 0000:00:1f.2 to 64 uhci_hcd 0000:00:1f.2: Intel Corporation 82801BA/BAM USB (Hub #1) uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1f.2: irq 19, io base 0x0000ff80 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected PCI: Setting latency timer of device 0000:00:1f.4 to 64 uhci_hcd 0000:00:1f.4: Intel Corporation 82801BA/BAM USB (Hub #2) uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1f.4: irq 18, io base 0x0000ff60 usb 1-2: new low speed USB device using uhci_hcd and address 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. ieee1394: Initialized config rom entry `ip1394' Real Time Clock Driver v1.12 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] usbcore: registered new driver hiddev input: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1f.2-2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver ts: Compaq touchscreen protocol output Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel i845 Chipset. agpgart: AGP aperture is 64M @ 0xf8000000 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:02:0c.0: 3Com PCI 3c905C Tornado at 0xdc80. Vers LK1.1.19 Linux video capture interface: v1.00 ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.0 (tagged release) loading ivtv: Linux version: 2.6.13.2-chw-3 SMP preempt 586 gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv0: Autodetected WinTV PVR 150 card (iTVC16 based) tuner (ivtv): chip found at addr 0xc0 i2c-bus ivtv i2c driver #0 TEA5767 detected. ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=60] tuner: type set to 62 (Philips TEA5767HN FM Radio) by autodetect type set to 62 (Philips TEA5767HN FM Radio) tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] tveeprom: Second (radio) tuner idx 101 tveeprom: ivtv version tveeprom: Hauppauge: model = 23552, rev = D592, serial# = 8223885 tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio processor = CX25843 (type = 25) tveeprom: decoder processor = CX25843 (type = 1e) ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] ivtv0: This is the first unit of a PVR500 cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) cx25840 1-0044: loaded /lib/modules/HcwMakoA.ROM firmware (14264 bytes) ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] tda9885/6/7: (ivtv) chip found @ 0x86 ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] ivtv0: Detected a TEA5767 radio tuner. Enabling radio support. ivtv0: loading /lib/modules/ivtv-fw-enc.bin ivtv0: Encoder revision: 0x02040011 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: Create encoder radio stream tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #0 ivtv0: Initialized WinTV PVR 500 (unit #1), card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected WinTV PVR 150 card (iTVC16 based) tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=61] tveeprom: Second (radio) tuner idx 101 tveeprom: ivtv version tveeprom: Hauppauge: model = 23552, rev = D592, serial# = 8223885 tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio processor = CX25843 (type = 25) tveeprom: decoder processor = CX25843 (type = 1e) ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50] cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) cx25840 2-0044: loaded /lib/modules/HcwMakoA.ROM firmware (14264 bytes) ivtv1: i2c attach to card #1 ok [client=cx25840, addr=44] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1) ivtv1: i2c attach to card #1 ok [client=wm8775, addr=1b] tda9885/6/7: (ivtv) chip found @ 0x86 ivtv1: i2c attach to card #1 ok [client=tda9887, addr=43] ivtv1: This is the second unit of a PVR500 ivtv1: Correcting tveeprom data: no radio present on second unit ivtv1: loading /lib/modules/ivtv-fw-enc.bin ivtv1: Encoder revision: 0x02040011 ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #1 ivtv1: Initialized WinTV PVR 500 (unit #2), card #1 ivtv: ==================== END INIT IVTV ==================== PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 55994 usecs intel8x0: clocking to 41138 NET: Registered protocol family 17 bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bt878: AUDIO driver version 0.0.0 loaded saa7146: register extension 'dvb'. saa7146: register extension 'budget dvb'. saa7146: register extension 'budget_ci dvb'. saa7146: register extension 'budget_av'. usbcore: registered new driver ttusb usbcore: registered new driver ttusb-dec NET: Registered protocol family 10 Disabled Privacy Extensions on device c04d8ba0(lo) IPv6 over IPv4 tunneling driver kjournald starting. Commit interval 5 seconds EXT3 FS on hda4, internal journal EXT3-fs: mounted filesystem with ordered data mode. Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon! hdc: Disabling (U)DMA for SAMSUNG CD-ROM SC-148C (blacklisted) hdc: Disabling (U)DMA for SAMSUNG CD-ROM SC-148C (blacklisted) lirc_dev: IR Remote Control driver registered, at major 61 cx2388x v4l2 driver version 0.0.5 loaded eth0: no IPv6 routers present ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A input: PC Speaker pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001 hw_random: RNG not detected shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001 tpm_inf 0000:00:1f.0: LPC-bus found at 0x2440 tpm_inf: probe of 0000:00:1f.0 failed with error -5 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001 cdrom: open failed.