;
; Configuration file of OpenH323 channel driver
;

;-----------------------------------------
; General configuration options
; (ports, jitter, GK, ...)
;-----------------------------------------
[general]
;
; Address to bind to for incoming connections.
; Default is ALL.
;
listenAddress=0.0.0.0
;
; Port to listen to.
; Default value is 1720.
;
listenPort=1720
;
; Configure the TCP port range to be used by H.323
;
tcpStart=10000
tcpEnd=20000
;
; Configure the UDP port range to be used by H.323
; Note: The port range used by RTP are configured from
;       "rtp.conf"
;
udpStart=10000
udpEnd=20000
;
; Enable fast start (yes,no).
;
fastStart=no
;
; Enable H.245 tunnelling (yes,no).
;
h245Tunnelling=no
;
; Enable early H.245 messages in call SETUP message.
;
h245inSetup=no
;
; Enable in-band-DTMF detection.

;
; Enable early H.245 messages in call SETUP message.
;
h245inSetup=no
;
; Enable in-band-DTMF detection.
; (Note: Netmeeting uses in-band DTMFs)
;
inBandDTMF=no
;
; Set jitter buffer (in milliseconds, 20...10000).
;
jitterMin=20
jitterMax=100
;
; Set IP Type-of-Service byte for RTP channels.
; Valid values for this option are:
;   lowdelay, throughput, reliability, mincost, none
; Moreover, an integer (in decimal or hex format) may be entered.
;
ipTos=none
;
; Set the maximum number of inbound/outbound/simultaneous
; Set the maximum number of inbound/outbound/simultaneous
; H.323 connections.
;
outboundMax=10
inboundMax=10
simultaneousMax=10
;
; Call Rate Limiter params (ingress direction). When the total number
; of active calls is above 'crlThreshold' then the rate of the incoming
; H.323 calls is restricted in a way where no more than 'crlCallNumber'
; calls are allowed in 'crlCallTime' milliseconds, thus limiting the rate
; of incoming calls to:
;     'crlCallNumber' / ('crlCallTime' / 1000) Calls-per-Sec.
;
;crlCallNumber=20
;crlCallTime=20000
;crlThreshold=30
;
; Set the bandwidth limit for H.323 connections.
; The value is in Kbps.
;
;bandwidthLimit=1024
;
; Set tracing options for the wrapper library and for the
; OpenH323 library.
; libTraceFile can be 'stdout' or a full path name to the tracefile.
; Only the trace info for OpenH323 is logged in libTraceFile.
;
wrapLibTraceLevel=1
libTraceLevel=0
libTraceFile=stdout
;
; Disable gatekeeper or specify a gatekeeper. The gatekeeper's ID is the zone name.
; Valid values for this option are:
;   DISABLE,
;   DISCOVER,
;   <gatekeeper's DNS name>,
;   <gatekeeper's ip>,
;   GKID:<gatekeeper's id>
;   <gatekeeper's id>@<gatekeeper's name or address>
;
;gatekeeper=192.168.1.2
gatekeeper=DISABLE
;
; Set the gatekeeper registration timeout. Before the expiration of
; the timeout, a re-registration is attempted.
;
gatekeeperTTL=600
;
; Set the mode for sending user-input (DTMF)
; Valid values for this option are:
;   Q931        -   Q.931 Keypad Information Element
;   STRING      -   H.245 string
;   TONE        -   H.245 tone
;   RFC2833     -   RFC2833
;
userInputMode=TONE
;
; AMA flags (default, omit, billing, documentation)
;
amaFlags=billing
;
; Account code
;
accountCode=H323
;
;
; Default language
;
language=en
;
; Default Music-On-Hold class
;
musiconhold=default
;
; Set the default context of H.323 calls.
;
context=oh323-in

;-----------------------------------------
; Configure H.323 aliases, prefixes and
; related ASTERISK's contexts
;-----------------------------------------
[register]
;
; Aliases/prefixes associated with the default context
; defined in section [general].
;
alias=asterisk
alias=123
;
; Aliases/prefixes routed in "all-aliases" context.
;
;context=all-aliases
;alias=ASTERISK
;alias=666
;
; Aliases/prefixes routed in "more-aliases" context.
;
;context=more-aliases
;alias=665
;
; Aliases/prefixes routed in "all-prefixes" context.
;
;context=all-prefixes
;gwprefix=00
;gwprefix=01
;
; Aliases/prefixes routed in "more-stuff" context.

;codec=G711A
;frames=20
;codec=G711U
;frames=20
;codec=GSM0610
;frames=4
;codec=G7231
;frames=2
codec=G729
frames=2
codec=G729A
frames=2
;codec=G7231