---- ligne de boot ---- root=/dev/hda2 ro vga=791 pnpbios=off pci=biosirq acpi=force quiet splash ----------------------- ---- LSUSB ------- Bus 004 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 ----------------- ---- DMESG ------ [17179569.184000] Linux version 2.6.15-27-386 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Sat Sep 16 01:51:59 UTC 2006 [17179569.184000] BIOS-provided physical RAM map: [17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [17179569.184000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [17179569.184000] BIOS-e820: 0000000000100000 - 000000001bfef000 (usable) [17179569.184000] BIOS-e820: 000000001bff0000 - 000000001bffffc0 (ACPI data) [17179569.184000] BIOS-e820: 000000001bffffc0 - 000000001c000000 (ACPI NVS) [17179569.184000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [17179569.184000] 0MB HIGHMEM available. [17179569.184000] 447MB LOWMEM available. [17179569.184000] On node 0 totalpages: 114671 [17179569.184000] DMA zone: 4096 pages, LIFO batch:0 [17179569.184000] DMA32 zone: 0 pages, LIFO batch:0 [17179569.184000] Normal zone: 110575 pages, LIFO batch:31 [17179569.184000] HighMem zone: 0 pages, LIFO batch:0 [17179569.184000] DMI 2.3 present. [17179569.184000] ACPI: RSDP (v000 OID_00 ) @ 0x000e6010 [17179569.184000] ACPI: RSDT (v001 INSYDE FACP_000 0x00000100 0000 0x00010200) @ 0x1bffc2d0 [17179569.184000] ACPI: FADT (v001 INSYDE FACP_000 0x00000100 0000 0x00010200) @ 0x1bfffb00 [17179569.184000] ACPI: MADT (v001 INSYDE APIC_000 0x30303030 0000 0x00010200) @ 0x1bfffb90 [17179569.184000] ACPI: DSDT (v001 INSYDE PN800 0x00001000 INTL 0x02002036) @ 0x00000000 [17179569.184000] ACPI: BIOS age (336) fails cutoff (2000), acpi=force is required to enable ACPI [17179569.184000] ACPI: acpi=force override [17179569.184000] ACPI: PM-Timer IO Port: 0x1008 [17179569.184000] ACPI: Local APIC address 0xfee00000 [17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [17179569.184000] Processor #0 6:13 APIC version 20 [17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [17179569.184000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [17179569.184000] ACPI: IRQ0 used by override. [17179569.184000] ACPI: IRQ2 used by override. [17179569.184000] ACPI: IRQ9 used by override. [17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs [17179569.184000] Using ACPI (MADT) for SMP configuration information [17179569.184000] Allocating PCI resources starting at 20000000 (gap: 1c000000:e3f80000) [17179569.184000] Built 1 zonelists [17179569.184000] Kernel command line: root=/dev/hda2 ro vga=791 pnpbios=off pci=biosirq acpi=force quiet splash [17179569.184000] mapped APIC to ffffd000 (fee00000) [17179569.184000] mapped IOAPIC to ffffc000 (fec00000) [17179569.184000] Initializing CPU#0 [17179569.184000] PID hash table entries: 2048 (order: 11, 32768 bytes) [17179569.184000] Detected 1293.828 MHz processor. [17179569.184000] Using pmtmr for high-res timesource [17179569.184000] Console: colour dummy device 80x25 [17179569.332000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [17179569.332000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [17179569.348000] Memory: 444212k/458684k available (1976k kernel code, 13908k reserved, 606k data, 288k init, 0k highmem) [17179569.348000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [17179569.428000] Calibrating delay using timer specific routine.. 2590.85 BogoMIPS (lpj=5181715) [17179569.428000] Security Framework v1.0.0 initialized [17179569.428000] SELinux: Disabled at boot. [17179569.428000] Mount-cache hash table entries: 512 [17179569.428000] CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000000 00000000 00000000 [17179569.428000] CPU: After vendor identify, caps: afe9fbff 00000000 00000000 00000000 00000000 00000000 00000000 [17179569.428000] CPU: L1 I cache: 32K, L1 D cache: 32K [17179569.428000] CPU: L2 cache: 1024K [17179569.428000] CPU: After all inits, caps: afe9fbff 00000000 00000000 00000040 00000000 00000000 00000000 [17179569.428000] mtrr: v2.0 (20020519) [17179569.428000] CPU: Intel(R) Celeron(R) M processor 1.30GHz stepping 08 [17179569.428000] Enabling fast FPU save and restore... done. [17179569.428000] Enabling unmasked SIMD FPU exception support... done. [17179569.428000] Checking 'hlt' instruction... OK. [17179569.444000] checking if image is initramfs... it is [17179570.252000] Freeing initrd memory: 6616k freed [17179570.260000] ACPI: Looking for DSDT ... not found! [17179570.272000] ENABLING IO-APIC IRQs [17179570.272000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [17179570.416000] NET: Registered protocol family 16 [17179570.416000] EISA bus registered [17179570.416000] ACPI: bus type pci registered [17179570.416000] PCI: PCI BIOS revision 2.10 entry at 0xe9b04, last bus=1 [17179570.416000] PCI: Using configuration type 1 [17179570.416000] ACPI: Subsystem revision 20051216 [17179570.420000] ACPI: Interpreter enabled [17179570.420000] ACPI: Using IOAPIC for interrupt routing [17179570.420000] ACPI: PCI Root Bridge [PCI0] (0000:00) [17179570.420000] PCI: Probing PCI hardware (bus 00) [17179570.420000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 [17179570.420000] PCI quirk: region 1000-107f claimed by vt8235 PM [17179570.420000] PCI quirk: region 1400-140f claimed by vt8235 SMB [17179570.420000] Boot video device is 0000:01:00.0 [17179570.420000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [17179570.440000] ACPI: Embedded Controller [EC0] (gpe 1) interrupt mode. [17179570.440000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) [17179570.440000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *7 10 11 14 15) [17179570.440000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) [17179570.440000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 14 15) [17179570.444000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [17179570.444000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [17179570.444000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [17179570.444000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [17179570.444000] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled. [17179570.444000] ACPI: PCI Interrupt Link [ALKB] (IRQs 23) *11 [17179570.444000] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *5, disabled. [17179570.444000] ACPI-0216: *** Error: Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node dbfd38e0), AE_TYPE [17179570.444000] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0 [17179570.444000] Linux Plug and Play Support v0.97 (c) Adam Belay [17179570.444000] pnp: PnP ACPI init [17179570.448000] pnp: PnP ACPI: found 9 devices [17179570.448000] PnPBIOS: Disabled [17179570.448000] PCI: Using ACPI for IRQ routing [17179570.448000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [17179570.448000] PCI: Cannot allocate resource region 0 of device 0000:00:06.0 [17179570.452000] pnp: 00:07: ioport range 0x330-0x331 has been reserved [17179570.452000] pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved [17179570.452000] pnp: 00:07: ioport range 0x1000-0x107f could not be reserved [17179570.452000] pnp: 00:07: ioport range 0x1400-0x140f has been reserved [17179570.452000] PCI: Bridge: 0000:00:01.0 [17179570.452000] IO window: c000-dfff [17179570.452000] MEM window: c0000000-cfffffff [17179570.452000] PREFETCH window: 90000000-9fffffff [17179570.452000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [17179570.452000] audit: initializing netlink socket (disabled) [17179570.452000] audit(1165688774.452:1): initialized [17179570.452000] VFS: Disk quotas dquot_6.5.1 [17179570.452000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [17179570.452000] Initializing Cryptographic API [17179570.452000] io scheduler noop registered [17179570.452000] io scheduler anticipatory registered [17179570.452000] io scheduler deadline registered [17179570.452000] io scheduler cfq registered [17179570.452000] isapnp: Scanning for PnP cards... [17179570.808000] isapnp: No Plug & Play device found [17179570.824000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [17179570.836000] i8042.c: Detected active multiplexing controller, rev 1.1. [17179570.840000] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [17179570.840000] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [17179570.844000] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [17179570.844000] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [17179570.844000] serio: i8042 KBD port at 0x60,0x64 irq 1 [17179570.844000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [17179570.848000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [17179570.848000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [17179570.848000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [17179570.848000] mice: PS/2 mouse device common for all mice [17179570.848000] EISA: Probing bus 0 at eisa.0 [17179570.848000] Cannot allocate resource for EISA slot 1 [17179570.848000] EISA: Detected 0 cards. [17179570.848000] NET: Registered protocol family 2 [17179570.876000] input: AT Translated Set 2 keyboard as /class/input/input0 [17179570.888000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [17179570.888000] TCP established hash table entries: 16384 (order: 4, 65536 bytes) [17179570.888000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [17179570.888000] TCP: Hash tables configured (established 16384 bind 16384) [17179570.888000] TCP reno registered [17179570.888000] TCP bic registered [17179570.888000] NET: Registered protocol family 1 [17179570.888000] NET: Registered protocol family 8 [17179570.888000] NET: Registered protocol family 20 [17179570.888000] Using IPI Shortcut mode [17179570.888000] ACPI wakeup devices: [17179570.888000] SBTN LAN AC97 MC97 KBC [17179570.888000] ACPI: (supports S0 S1 S3 S4 S5) [17179570.888000] Freeing unused kernel memory: 288k freed [17179570.940000] vesafb: framebuffer at 0x90000000, mapped to 0xdc880000, using 3072k, total 65536k [17179570.940000] vesafb: mode is 1024x768x16, linelength=2048, pages=41 [17179570.940000] vesafb: protected mode interface info at c000:a81f [17179570.940000] vesafb: scrolling: redraw [17179570.940000] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [17179570.940000] vesafb: Mode is VGA compatible [17179570.956000] Console: switching to colour frame buffer device 128x48 [17179570.956000] fb0: VESA VGA frame buffer device [17179571.996000] Capability LSM initialized [17179572.068000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [17179572.068000] ACPI: Processor [CPU0] (supports 16 throttling states) [17179572.076000] ACPI: Thermal Zone [TZ0] (0 C) [17179572.464000] VP_IDE: IDE controller at PCI slot 0000:00:11.1 [17179572.464000] **** SET: Misaligned resource pointer: dab3e1c2 Type 07 Len 0 [17179572.464000] ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug. [17179572.464000] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20 [17179572.464000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 [17179572.464000] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169 [17179572.464000] PCI: Via IRQ fixup for 0000:00:11.1, from 0 to 9 [17179572.464000] VP_IDE: chipset revision 6 [17179572.464000] VP_IDE: not 100% native mode: will probe irqs later [17179572.464000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 [17179572.464000] ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio [17179572.464000] ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio [17179572.464000] Probing IDE interface ide0... [17179572.880000] hda: ST950212A, ATA DISK drive [17179573.552000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [17179573.628000] Probing IDE interface ide1... [17179574.492000] hdc: UJDA770 DVD/CDRW, ATAPI CD/DVD-ROM drive [17179574.828000] ide1 at 0x170-0x177,0x376 on irq 15 [17179574.832000] hda: max request size: 1024KiB [17179574.840000] hda: 97692174 sectors (50018 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) [17179574.844000] hda: cache flushes supported [17179574.844000] hda: hda1 hda2 hda3 < hda5 hda6 hda7 > [17179574.968000] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) [17179574.968000] Uniform CD-ROM driver Revision: 3.20 [17179575.536000] usbcore: registered new driver usbfs [17179575.536000] usbcore: registered new driver hub [17179575.536000] USB Universal Host Controller Interface driver v2.3 [17179575.536000] **** SET: Misaligned resource pointer: dabee502 Type 07 Len 0 [17179575.536000] ACPI-0216: *** Error: Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node dbfd38e0), AE_TYPE [17179575.536000] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD] (likely buggy ACPI BIOS). [17179575.536000] Try pci=noacpi or acpi=off [17179575.536000] ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI - using IRQ 11 [17179575.536000] uhci_hcd 0000:00:10.0: UHCI Host Controller [17179575.536000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [17179575.536000] uhci_hcd 0000:00:10.0: irq 11, io base 0x00001200 [17179575.536000] hub 1-0:1.0: USB hub found [17179575.536000] hub 1-0:1.0: 2 ports detected [17179575.640000] **** SET: Misaligned resource pointer: dabee202 Type 07 Len 0 [17179575.640000] ACPI-0216: *** Error: Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node dbfd38e0), AE_TYPE [17179575.640000] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD] (likely buggy ACPI BIOS). [17179575.640000] Try pci=noacpi or acpi=off [17179575.640000] ACPI: PCI Interrupt 0000:00:10.1[B]: no GSI - using IRQ 7 [17179575.640000] uhci_hcd 0000:00:10.1: UHCI Host Controller [17179575.640000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [17179575.640000] uhci_hcd 0000:00:10.1: irq 7, io base 0x00001220 [17179575.640000] hub 2-0:1.0: USB hub found [17179575.640000] hub 2-0:1.0: 2 ports detected [17179575.744000] **** SET: Misaligned resource pointer: dbbdcdc2 Type 07 Len 0 [17179575.744000] ACPI-0216: *** Error: Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node dbfd38e0), AE_TYPE [17179575.744000] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD] (likely buggy ACPI BIOS). [17179575.744000] Try pci=noacpi or acpi=off [17179575.744000] ACPI: PCI Interrupt 0000:00:10.2[C]: no GSI - using IRQ 5 [17179575.744000] uhci_hcd 0000:00:10.2: UHCI Host Controller [17179575.744000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [17179575.744000] uhci_hcd 0000:00:10.2: irq 5, io base 0x00001240 [17179575.744000] hub 3-0:1.0: USB hub found [17179575.744000] hub 3-0:1.0: 2 ports detected [17179575.848000] PCI: Enabling device 0000:00:10.3 (0000 -> 0002) [17179575.848000] **** SET: Misaligned resource pointer: dbbdcac2 Type 07 Len 0 [17179575.848000] ACPI-0216: *** Error: Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node dbfd38e0), AE_TYPE [17179575.848000] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD] (likely buggy ACPI BIOS). [17179575.848000] Try pci=noacpi or acpi=off [17179575.848000] ACPI: PCI Interrupt 0000:00:10.3[D]: no GSI - using IRQ 10 [17179575.848000] ehci_hcd 0000:00:10.3: EHCI Host Controller [17179575.848000] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [17179575.848000] ehci_hcd 0000:00:10.3: irq 10, io mem 0x20008000 [17179575.848000] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [17179575.848000] hub 4-0:1.0: USB hub found [17179575.848000] hub 4-0:1.0: 6 ports detected [17179576.096000] Attempting manual resume [17179576.132000] EXT3-fs: mounted filesystem with ordered data mode. [17179576.140000] kjournald starting. Commit interval 5 seconds [17179576.744000] usb 4-2: new high speed USB device using ehci_hcd and address 2 [17179577.744000] ehci_hcd 0000:00:10.3: Unlink after no-IRQ? Controller is probably using the wrong IRQ. [17179588.288000] usb 4-2: device not accepting address 2, error -110 [17179588.400000] usb 4-2: new high speed USB device using ehci_hcd and address 3 [17179588.684000] Linux agpgart interface v0.101 (c) Dave Jones [17179588.688000] agpgart: Detected VIA PM800/PN800/PM880/PN880 chipset [17179588.688000] agpgart: AGP aperture is 32M @ 0xa0000000 [17179589.152000] irda_init() [17179589.152000] NET: Registered protocol family 23 [17179589.668000] Real Time Clock Driver v1.12 [17179589.752000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker [17179589.752000] **** SET: Misaligned resource pointer: daa4f902 Type 07 Len 0 [17179589.752000] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 11, using IRQ 23 [17179589.752000] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 23 [17179589.752000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKB] -> GSI 23 (level, low) -> IRQ 177 [17179589.752000] PCI: Via IRQ fixup for 0000:00:12.0, from 11 to 1 [17179589.756000] eth0: VIA Rhine II at 0x1e200, 00:40:d0:94:f3:f3, IRQ 177. [17179589.756000] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. [17179589.796000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [17179589.832000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [17179589.848000] rt61: module license 'unspecified' taints kernel. [17179589.848000] PCI: Enabling device 0000:00:06.0 (0000 -> 0002) [17179589.848000] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 185 [17179589.848000] RT61: Vendor = 0x1814, Product = 0x0301 [17179589.848000] PCI: Setting latency timer of device 0000:00:06.0 to 64 [17179589.852000] input: PC Speaker as /class/input/input1 [17179590.056000] **** SET: Misaligned resource pointer: daa4f302 Type 07 Len 0 [17179590.056000] ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug. [17179590.056000] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 5, using IRQ 22 [17179590.056000] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [17179590.056000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 193 [17179590.056000] PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 1 [17179590.056000] PCI: Setting latency timer of device 0000:00:11.5 to 64 [17179590.572000] ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 193 [17179590.572000] PCI: Via IRQ fixup for 0000:00:11.6, from 5 to 1 [17179590.604000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b3, caps: 0xa04713/0x200000 [17179590.656000] input: SynPS/2 Synaptics TouchPad as /class/input/input2 [17179590.692000] ts: Compaq touchscreen protocol output [17179591.324000] PCI: Setting latency timer of device 0000:00:11.6 to 64 [17179591.828000] ACPI: PCI interrupt for device 0000:00:11.6 disabled [17179591.828000] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13 [17179592.216000] lp: driver loaded but no devices found [17179592.272000] Adding 409616k swap on /dev/hda6. Priority:-1 extents:1 across:409616k [17179592.308000] EXT3 FS on hda2, internal journal [17179592.504000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [17179592.504000] md: bitmap version 4.39 [17179593.356000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com [17179593.992000] cdrom: open failed. [17179595.508000] NTFS driver 2.1.25 [Flags: R/O MODULE]. [17179595.588000] NTFS volume version 3.1. [17179595.608000] kjournald starting. Commit interval 5 seconds [17179595.608000] EXT3 FS on hda5, internal journal [17179595.608000] EXT3-fs: mounted filesystem with ordered data mode. [17179597.400000] ACPI: AC Adapter [AC] (off-line) [17179597.428000] ACPI: Battery Slot [BAT0] (battery present) [17179597.520000] ACPI: Power Button (FF) [PWRF] [17179597.520000] ACPI: Lid Switch [LID] [17179597.520000] ACPI: Sleep Button (CM) [SBTN] [17179597.644000] ibm_acpi: ec object not found [17179597.680000] pcc_acpi: loading... [17179597.796000] ACPI: Video Device [VGA0] (multi-head: yes rom: no post: no) [17179599.092000] capifs: Rev 1.1.2.3 [17179599.944000] usb 4-2: device not accepting address 3, error -110 [17179600.056000] usb 4-2: new high speed USB device using ehci_hcd and address 4 [17179603.716000] ppdev: user-space parallel port driver [17179604.144000] apm: BIOS not found. [17179605.148000] ra0 (WE) : Driver using old /proc/net/wireless support, please fix driver ! [17179610.480000] usb 4-2: device not accepting address 4, error -110 [17179610.592000] usb 4-2: new high speed USB device using ehci_hcd and address 5 [17179611.968000] Bluetooth: Core ver 2.8 [17179611.968000] NET: Registered protocol family 31 [17179611.968000] Bluetooth: HCI device and connection manager initialized [17179611.968000] Bluetooth: HCI socket layer initialized [17179611.984000] Bluetooth: L2CAP ver 2.8 [17179611.984000] Bluetooth: L2CAP socket layer initialized [17179621.016000] usb 4-2: device not accepting address 5, error -110 [17179621.300000] Bluetooth: RFCOMM socket layer initialized [17179621.300000] Bluetooth: RFCOMM TTY layer initialized [17179621.300000] Bluetooth: RFCOMM ver 1.7