/ % crvl 21

'crvl' command is archaic, 'crgp' is preferred...

    GROUP Number (  2) : 21
    Description (no quotes) : recherche
    Enable WAN Routing? (n): 
    Enable ATM CIP? (n): 
    Enable IP (y) : 
       IP Address                              : cancelled

/ % crvl

'crvl' command is archaic, 'crgp' is preferred...

    GROUP Number (  2) : 21
    Description (no quotes) : recherche
    Enable WAN Routing? (n): 
    Enable ATM CIP? (n): 
    Enable IP (y) : n
    Enable IPX? (y): n
    Enter a priority level (0...7)(0):
Enable Group Mobility on this Group ? [y/n](n): 
This Group will not participate in Group Mobility

Do you wish to configure the interface group for this Virtual LAN
   at this time? (y) 

Initial Vports(Slot/Phys Intf. Range) - For example, first I/O Module
(slot 2), second Interface would be 2/2. Specify a range of interfaces
and/or a list as in:   2/1-3, 3/3, 3/5, 4/6-8.

    Initial Slot/Interface Assignments: 5/1-4
    5/4 - This interface is currently assigned to GROUP 1 -
          (Default GROUP (#1)).
     Do you wish to remove it from that GROUP and assign it (with
     new configuration values) to this GROUP [y|n|c to Accept defaults] (n)? y
    5/3 - This interface is currently assigned to GROUP 1 -
          (Default GROUP (#1)).
     Do you wish to remove it from that GROUP and assign it (with
     new configuration values) to this GROUP [y|n|c to Accept defaults] (n)? y
    5/2 - This interface is currently assigned to GROUP 1 -
          (Default GROUP (#1)).
     Do you wish to remove it from that GROUP and assign it (with
     new configuration values) to this GROUP [y|n|c to Accept defaults] (n)? y
    5/1 - This interface is currently assigned to GROUP 1 -
          (Default GROUP (#1)).
     Do you wish to remove it from that GROUP and assign it (with
     new configuration values) to this GROUP [y|n|c to Accept defaults] (n)? y


                  Modify Ether 10/100 Vport 5/4 Configuration

 1) Vport/Group/Instance/Type   : 20/21/1/Brg 
 2) Description                 : 
 3) Bridge Mode                 : Auto-Switched
   31) Switch Timer                : 60
 4) Flood Limit                 : 192000
 5) Output Format Type          : Default(IP-Eth II, IPX-802.3)
 6) Ethernet 802.2 Pass Through : Yes
 7) Admin, Operational Status   : Enabled, inactive
 8) Mirrored Port Status        : Disabled, available
 9) MAC address                 : 000000:000000

Command {Item=Value/?/Help/Quit/Redraw/Save} (Redraw)  : 2


                  Modify Ether 10/100 Vport 5/4 Configuration

 1) Vport/Group/Instance/Type   : 20/21/1/Brg (unsaved)
 2) Description                 : 
 3) Bridge Mode                 : Auto-Switched
   31) Switch Timer                : 60
 4) Flood Limit                 : 192000
 5) Output Format Type          : Default(IP-Eth II, IPX-802.3)
 6) Ethernet 802.2 Pass Through : Yes
 7) Admin, Operational Status   : Enabled, inactive
 8) Mirrored Port Status        : Disabled, available
 9) MAC address                 : 000000:000000

Command {Item=Value/?/Help/Quit/Redraw/Save} (Redraw)  :   


                  Modify Ether 10/100 Vport 5/4 Configuration

 1) Vport/Group/Instance/Type   : 20/21/1/Brg (unsaved)
 2) Description                 : 
 3) Bridge Mode                 : Auto-Switched
   31) Switch Timer                : 60
 4) Flood Limit                 : 192000
 5) Output Format Type          : Default(IP-Eth II, IPX-802.3)
 6) Ethernet 802.2 Pass Through : Yes
 7) Admin, Operational Status   : Enabled, inactive
 8) Mirrored Port Status        : Disabled, available
 9) MAC address                 : 000000:000000

Command {Item=Value/?/Help/Quit/Redraw/Save} (Redraw)  : 


                  Modify Ether 10/100 Vport 5/4 Configuration

 1) Vport/Group/Instance/Type   : 20/21/1/Brg (unsaved)
 2) Description                 : 
 3) Bridge Mode                 : Auto-Switched
   31) Switch Timer                : 60
 4) Flood Limit                 : 192000
 5) Output Format Type          : Default(IP-Eth II, IPX-802.3)
 6) Ethernet 802.2 Pass Through : Yes
 7) Admin, Operational Status   : Enabled, inactive
 8) Mirrored Port Status        : Disabled, available
 9) MAC address                 : 000000:000000

Command {Item=Value/?/Help/Quit/Redraw/Save} (Redraw)  : 


                  Modify Ether 10/100 Vport 5/4 Configuration

 1) Vport/Group/Instance/Type   : 20/21/1/Brg (unsaved)
 2) Description                 : 
 3) Bridge Mode                 : Auto-Switched
   31) Switch Timer                : 60
 4) Flood Limit                 : 192000
 5) Output Format Type          : Default(IP-Eth II, IPX-802.3)
 6) Ethernet 802.2 Pass Through : Yes
 7) Admin, Operational Status   : Enabled, inactive
 8) Mirrored Port Status        : Disabled, available
 9) MAC address                 : 000000:000000

Command {Item=Value/?/Help/Quit/Redraw/Save} (Redraw)  : s
ui_do_create_vlan() - attempt to configure a mac of 000000:000000


                  Modify Ether 10/100 Vport 5/3 Configuration

 1) Vport/Group/Instance/Type   : 19/21/1/Brg 
 2) Description                 : 
 3) Bridge Mode                 : Auto-Switched
   31) Switch Timer                : 60
 4) Flood Limit                 : 192000
 5) Output Format Type          : Default(IP-Eth II, IPX-802.3)
 6) Ethernet 802.2 Pass Through : Yes
 7) Admin, Operational Status   : Enabled, inactive
 8) Mirrored Port Status        : Disabled, available
 9) MAC address                 : 000000:000000

Command {Item=Value/?/Help/Quit/Redraw/Save} (Redraw)  : s
        The configuration parameters have not changed, there are no 
        parameters to save.
Unable to select this option, use 'q' to quit.


                  Modify Ether 10/100 Vport 5/3 Configuration

 1) Vport/Group/Instance/Type   : 19/21/1/Brg 
 2) Description                 : 
 3) Bridge Mode                 : Auto-Switched
   31) Switch Timer                : 60
 4) Flood Limit                 : 192000
 5) Output Format Type          : Default(IP-Eth II, IPX-802.3)
 6) Ethernet 802.2 Pass Through : Yes
 7) Admin, Operational Status   : Enabled, inactive
 8) Mirrored Port Status        : Disabled, available
 9) MAC address                 : 000000:000000

Command {Item=Value/?/Help/Quit/Redraw/Save} (Redraw)  : q


                  Modify Ether 10/100 Vport 5/2 Configuration

 1) Vport/Group/Instance/Type   : 18/21/1/Brg 
 2) Description                 : 
 3) Bridge Mode                 : Auto-Switched
   31) Switch Timer                : 60
 4) Flood Limit                 : 192000
 5) Output Format Type          : Default(IP-Eth II, IPX-802.3)
 6) Ethernet 802.2 Pass Through : Yes
 7) Admin, Operational Status   : Enabled, inactive
 8) Mirrored Port Status        : Disabled, available
 9) MAC address                 : 000000:000000

Command {Item=Value/?/Help/Quit/Redraw/Save} (Redraw)  : q


                  Modify Ether 10/100 Vport 5/1 Configuration

 1) Vport/Group/Instance/Type   : 17/21/1/Brg 
 2) Description                 : 
 3) Bridge Mode                 : Auto-Switched
   31) Switch Timer                : 60
 4) Flood Limit                 : 192000
 5) Output Format Type          : Default(IP-Eth II, IPX-802.3)
 6) Ethernet 802.2 Pass Through : Yes
 7) Admin, Operational Status   : Enabled, active
 8) Mirrored Port Status        : Disabled, available
 9) MAC address                 : 000000:000000

Command {Item=Value/?/Help/Quit/Redraw/Save} (Redraw)  : q
    Adding port 5/4 to GROUP 21...
    Adding port 5/3 to GROUP 21...
    Adding port 5/2 to GROUP 21...
    Adding port 5/1 to GROUP 21...
You may modify interfaces to this group using the addvp, modvp and rmvp
commands at a later date if you choose.