Using PowerMac machine description Total memory = 1024MB; using 2048kB for hash table (at cfe00000) Linux version 2.6.18-1.2849.fc6smp (brewbuilder@js20-bc1-10.build.redhat.com) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Fri Nov 10 13:29:25 EST 2006 Found initrd at 0xc1a00000:0xc1c66c00 Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0x11 Mapped at 0xfdfc0000 Found a Keylargo mac-io controller, rev: 3, mapped at 0xfdf40000 PowerMac motherboard: PowerMac G4 Silver Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0 Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0 Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0 via-pmu: Server Mode is disabled PMU driver v2 initialized for Core99, firmware: 0c nvram: Checking bank 0... nvram: gen0=664, gen1=665 nvram: Active bank is: 1 nvram: OF partition at 0x210 nvram: XP partition at 0xffffffff nvram: NR partition at 0xffffffff Top of RAM: 0x40000000, Total RAM: 0x40000000 Memory hole size: 0MB On node 0 totalpages: 262144 DMA zone: 196608 pages, LIFO batch:31 HighMem zone: 65536 pages, LIFO batch:15 Built 1 zonelists. Total pages: 262144 Kernel command line: root=/dev/VolGroup00/LogVol00 ro rhgb quiet mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs mpic: ISU size: 64, shift: 6, mask: 3f mpic: Initializing for 64 sources PID hash table entries: 4096 (order: 12, 16384 bytes) GMT Delta read from XPRAM: 0 minutes, DST: on time_init: decrementer frequency = 33.290001 MHz time_init: processor frequency = 533.333332 MHz Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) High memory: 262144k Memory: 1029328k/1048576k available (3600k kernel code, 280628k reserved, 352k data, 313k bss, 212k init) Calibrating delay loop... 66.30 BogoMIPS (lpj=33152) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1" device-tree: Duplicate name in /cpus/PowerPC,G4@1, renamed to "l2-cache#1" PowerMac SMP probe found 2 cpus KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000 channel 0 bus channel 1 bus KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000 channel 0 bus PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000 channel 1 bus channel 2 bus Processor timebase sync using GPIO 0x73 mpic: requesting IPIs ... CPU0: L2CR is b9000000 CPU1: L2CR was 39000000 CPU1: L2CR set to b9000000 Processor 1 found. Brought up 2 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=432 bytes sizeof(dentry)=148 bytes sizeof(ext3inode)=608 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=172 bytes sizeof(task_struct)=1600 bytes migration_cost=4789 checking if image is initramfs... it is Freeing initrd memory: 2459k freed NET: Registered protocol family 16 PCI: Probing PCI hardware PCI: Enabling device 0001:10:14.0 (0014 -> 0017) PCI: Enabling device 0001:10:14.1 (0014 -> 0017) Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 9, 2621440 bytes) TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Thermal assist unit using timers, shrink_timer: 2000 jiffies audit: initializing netlink socket (disabled) audit(1166520813.073:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Using unsupported 1600x1024 NVDA,NVMac at 98004000, depth=8, pitch=2048 Console: switching to colour frame buffer device 200x64 fb0: Open Firmware frame buffer device on /pci@f0000000/NVDA,NVMac@10 Generic RTC Driver v1.07 Macintosh non-volatile memory driver v1.1 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected Apple UniNorth 1.5 chipset agpgart: configuring for size idx: 4 agpgart: AGP aperture is 16M @ 0x0 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize MacIO PCI driver attached to Keylargo chipset input: Macintosh mouse button emulation as /class/input/input0 apm_emu: APM Emulation 0.5 initialized. adb: starting probe task... adb: finished probe task... Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide0: Found Apple KeyLargo ATA-4 controller, bus ID 2, irq 19 Probing IDE interface ide0... ide1: Found Apple KeyLargo ATA-3 controller, bus ID 0, irq 20 Probing IDE interface ide1... hdc: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive hdd: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive hdc: Enabling MultiWord DMA 2 ide1 at 0xf101a000-0xf101a007,0xf101a160 on irq 20 ide2: Found Apple KeyLargo ATA-3 controller, bus ID 1, irq 21 Probing IDE interface ide2... Probing IDE interface ide0... Probing IDE interface ide2... ide-floppy driver 0.99.newide hdd: No disk in drive hdd: 244736kB, 239/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm usbcore: registered new driver libusual usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice PowerMac i2c bus pmu 2 registered PowerMac i2c bus pmu 1 registered PowerMac i2c bus mac-io 0 registered PowerMac i2c bus uni-n 1 registered PowerMac i2c bus uni-n 0 registered md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 input: PMU as /class/input/input1 Freeing unused kernel memory: 212k init USB Universal Host Controller Interface driver v3.0 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) PCI: Enabling device 0001:10:18.0 (0000 -> 0002) ohci_hcd 0001:10:18.0: OHCI Host Controller ohci_hcd 0001:10:18.0: new USB bus registered, assigned bus number 1 ohci_hcd 0001:10:18.0: irq 27, io mem 0x80083000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected PCI: Enabling device 0001:10:19.0 (0000 -> 0002) ohci_hcd 0001:10:19.0: OHCI Host Controller ohci_hcd 0001:10:19.0: new USB bus registered, assigned bus number 2 ohci_hcd 0001:10:19.0: irq 28, io mem 0x80082000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected hdd: No disk in drive usb 1-2: new full speed USB device using ohci_hcd and address 2 SCSI subsystem initialized usb 1-2: configuration #1 chosen from 1 choice hub 1-2:1.0: USB hub found hub 1-2:1.0: 3 ports detected sym0: <1010-33> rev 0x1 at pci 0001:10:14.0 irq 54 sym0: No NVRAM, ID 7, Fast-80, LVD, parity checking sym0: SCSI BUS has been reset. scsi0 : sym-2.2.3 usb 2-1: new low speed USB device using ohci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice hiddev96: USB HID v1.00 Device [American Power Conversion Back-UPS 500 FW: 6.2.D USB FW: c1 ] on usb-0001:10:19.0-1 usb 1-2.2: new full speed USB device using ohci_hcd and address 3 usb 1-2.2: configuration #1 chosen from 1 choice hub 1-2.2:1.0: USB hub found hub 1-2.2:1.0: 3 ports detected usb 1-2.3: new low speed USB device using ohci_hcd and address 4 usb 1-2.3: configuration #1 chosen from 1 choice Vendor: SEAGATE Model: ST173404LW Rev: 3701 Type: Direct-Access ANSI SCSI revision: 03 target0:0:0: tagged command queuing enabled, command queue depth 16. target0:0:0: Beginning Domain Validation target0:0:0: asynchronous target0:0:0: wide asynchronous target0:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) target0:0:0: Ending Domain Validation SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB) sda: Write Protect is off sda: Mode Sense: c1 00 10 08 SCSI device sda: drive cache: write back w/ FUA SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB) sda: Write Protect is off sda: Mode Sense: c1 00 10 08 SCSI device sda: drive cache: write back w/ FUA sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sd 0:0:0:0: Attached scsi disk sda Vendor: SEAGATE Model: ST173404LWV Rev: 4301 Type: Direct-Access ANSI SCSI revision: 03 target0:0:1: tagged command queuing enabled, command queue depth 16. target0:0:1: Beginning Domain Validation target0:0:1: asynchronous target0:0:1: wide asynchronous target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) target0:0:1: Ending Domain Validation SCSI device sdb: 143374738 512-byte hdwr sectors (73408 MB) sdb: Write Protect is off sdb: Mode Sense: 9f 00 10 08 SCSI device sdb: drive cache: write back w/ FUA SCSI device sdb: 143374738 512-byte hdwr sectors (73408 MB) sdb: Write Protect is off sdb: Mode Sense: 9f 00 10 08 SCSI device sdb: drive cache: write back w/ FUA sdb: [mac] sdb1 sdb2 sdb3 sdb4 sd 0:0:1:0: Attached scsi disk sdb Vendor: SEAGATE Model: ST373405LW Rev: 0003 Type: Direct-Access ANSI SCSI revision: 03 target0:0:2: tagged command queuing enabled, command queue depth 16. target0:0:2: Beginning Domain Validation target0:0:2: asynchronous target0:0:2: wide asynchronous target0:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) target0:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) target0:0:2: Ending Domain Validation SCSI device sdc: 143374741 512-byte hdwr sectors (73408 MB) sdc: Write Protect is off sdc: Mode Sense: a3 00 10 08 SCSI device sdc: drive cache: write back w/ FUA SCSI device sdc: 143374741 512-byte hdwr sectors (73408 MB) sdc: Write Protect is off sdc: Mode Sense: a3 00 10 08 SCSI device sdc: drive cache: write back w/ FUA sdc: [mac] sdc1 sdc2 sdc3 sdc4 sd 0:0:2:0: Attached scsi disk sdc sym1: <1010-33> rev 0x1 at pci 0001:10:14.1 irq 54 sym1: No NVRAM, ID 7, Fast-80, SE, parity checking sym1: SCSI BUS has been reset. sym1: SCSI BUS mode change from SE to SE. sym1: SCSI BUS has been reset. scsi1 : sym-2.2.3 drivers/usb/input/hid-core.c: usb_submit_urb(ctrl) failed drivers/usb/input/hid-core.c: timeout initializing reports hiddev97: USB HID v1.00 Device [LG Electronics Inc. USB Monitor] on usb-0001:10:18.0-2.3 usb 1-2.2.1: new full speed USB device using ohci_hcd and address 5 usb 1-2.2.1: configuration #1 chosen from 1 choice input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input2 input: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:18.0-2.2.1 input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input3 input: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:18.0-2.2.1 usb 1-2.2.2: new low speed USB device using ohci_hcd and address 6 usb 1-2.2.2: configuration #1 chosen from 1 choice input: KOOL Contour UniMouse Optical as /class/input/input4 input: USB HID v1.10 Mouse [KOOL Contour UniMouse Optical] on usb-0001:10:18.0-2.2.2 device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com hdd: No disk in drive hdd: No disk in drive hdd: No disk in drive kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. security: 3 users, 6 roles, 1583 types, 172 bools, 1 sens, 1024 cats security: 59 classes, 49430 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), not configured for labeling SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1166520837.036:2): policy loaded auid=4294967295 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:1:0: Attached scsi generic sg1 type 0 sd 0:0:2:0: Attached scsi generic sg2 type 0 sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com) PHY ID: 206053, addr: 0 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:30:65:b9:22:ae eth0: Found BCM5401 PHY eth0: Link is up at 1000 Mbps, full-duplex. ieee1394: Initialized config rom entry `ip1394' PCI: Enabling device 0001:10:12.0 (0010 -> 0012) pmac_zilog: 0.6 (Benjamin Herrenschmidt ) pmac_zilog: i2c-modem detected, id: 1 pmac_zilog: Error registering serial device, disabling pmac_zilog. pmac_zilog: Did another serial driver already claim the minors? ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[52] MMIO=[80084000-800847ff] Max Packet=[1024] IR/IT contexts=[4/4] ohci1394: fw-host1: OHCI-1394 1.0 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] IR/IT contexts=[8/8] pmac_zilog: 0.6 (Benjamin Herrenschmidt ) pmac_zilog: i2c-modem detected, id: 1 pmac_zilog: Error registering serial device, disabling pmac_zilog. pmac_zilog: Did another serial driver already claim the minors? hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, (U)DMA Uniform CD-ROM driver Revision: 3.20 Badness in ohci_hw_csr_reg at drivers/ieee1394/ohci1394.c:3187 Call Trace: [CFD8FBD0] [C0008D8C] show_stack+0x50/0x184 (unreliable) [CFD8FBF0] [C0010FFC] program_check_exception+0x194/0x51c [CFD8FC40] [C0012AAC] ret_from_except_full+0x0/0x4c --- Exception: 700 at ohci_hw_csr_reg+0x9c/0xe0 [ohci1394] LR = host_reset+0x7c/0x110 [ieee1394] [CFD8FD00] [C1F72F20] 0xc1f72f20 (unreliable) [CFD8FD20] [F13AF060] host_reset+0x7c/0x110 [ieee1394] [CFD8FD40] [F13AE4E0] highlevel_host_reset+0x44/0x98 [ieee1394] [CFD8FD60] [F13AB9B0] hpsb_selfid_complete+0x2e0/0x2f4 [ieee1394] [CFD8FD80] [F135638C] ohci_irq_handler+0x900/0x970 [ohci1394] [CFD8FDA0] [C0067030] handle_IRQ_event+0x54/0xa8 [CFD8FDC0] [C006886C] handle_fasteoi_irq+0xd0/0x138 [CFD8FDE0] [C0006898] do_IRQ+0x70/0xac [CFD8FDF0] [C0012AF8] ret_from_except+0x0/0x14 --- Exception: 501 at _spin_unlock_irqrestore+0x20/0x30 LR = _spin_unlock_irqrestore+0x18/0x30 [CFD8FED0] [F13514FC] set_phy_reg+0xe4/0xf8 [ohci1394] [CFD8FEF0] [F1353290] ohci_devctl+0x88/0x530 [ohci1394] [CFD8FF20] [F13AB034] hpsb_reset_bus+0x34/0x4c [ieee1394] [CFD8FF30] [F13AD628] delayed_reset_bus+0xcc/0xe0 [ieee1394] [CFD8FF40] [C004BC5C] run_workqueue+0xa4/0x110 [CFD8FF60] [C004C564] worker_thread+0xe4/0x12c [CFD8FFB0] [C004FF54] kthread+0xd8/0x114 [CFD8FFF0] [C0013514] kernel_thread+0x44/0x60 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c0d00000f7e75b] ieee1394: Host added: ID:BUS[1-00:1023] GUID[003065fffeb922ae] input: PowerMac Beep as /class/input/input5 lp: driver loaded but no devices found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. hdd: No disk in drive hdd: No disk in drive EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sdb3, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sdb3, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev dm-2, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda6, type ext3), uses xattr Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k Adding 2031608k swap on /dev/VolGroup01/LogVol01. Priority:-2 extents:1 across:2031608k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts eth0: Link is up at 1000 Mbps, full-duplex. eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632) SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts Bluetooth: Core ver 2.10 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.1 SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present audit(1166539027.083:3): avc: denied { execstack } for pid=2490 comm="mixer_applet2" scontext=user_u:system_r:unconfined_t:s0 tcontext=user_u:system_r:unconfined_t:s0 tclass=process audit(1166539027.083:4): avc: denied { execmem } for pid=2490 comm="mixer_applet2" scontext=user_u:system_r:unconfined_t:s0 tcontext=user_u:system_r:unconfined_t:s0 tclass=process hdd: No disk in drive hdd: No disk in drive hdd: No disk in drive hdd: No disk in drive hdd: No disk in drive hdd: No disk in drive