exec
Using base address 0x00400000 and length 0x000f2960
Uncompressing Linux................................................................... done, booting the kernel.

Linux version 2.6.14 (rwhitby@sarge) (gcc version 3.4.4) #1 Sat Nov 12 04:52:48 CST 2005

CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE)

Machine: Iomega NAS 100d

Memory policy: ECC disabled, Data cache writeback

CPU0: D VIVT undefined 5 cache

CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets

CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets

Built 1 zonelists

Kernel command line: root=/dev/mtdblock3 rw rootfstype=jffs2 mem=64M@0x00000000 init=/linuxrc  noirqdebug console=ttyS0,115200n8

PID hash table entries: 512 (order: 9, 8192 bytes)

Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)

Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)

Memory: 64MB = 64MB total

Memory: 62720KB available (1853K code, 170K data, 84K init)

Mount-cache hash table entries: 512

CPU: Testing write buffer coherency: ok

NET: Registered protocol family 16

PCI: IXP4xx is host

PCI: IXP4xx Using indirect access for memory space

PCI: bus0: Fast back to back transfers disabled

dmabounce: registered device 0000:00:01.0 on pci bus

dmabounce: registered device 0000:00:02.0 on pci bus

dmabounce: registered device 0000:00:03.0 on pci bus

dmabounce: registered device 0000:00:03.1 on pci bus

dmabounce: registered device 0000:00:03.2 on pci bus

SCSI subsystem initialized

usbcore: registered new driver usbfs

usbcore: registered new driver hub

NetWinder Floating Point Emulator V0.97 (double precision)

JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.

Initializing Cryptographic API

IXP4xx Watchdog Timer: heartbeat 60 sec

Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled

ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale

ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale

io scheduler noop registered

io scheduler deadline registered

RAMDISK driver initialized: 4 RAM disks of 10240K size 1024 blocksize

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

ide: enabling nas100d iops

ide: enabling nas100d iops

ide: enabling nas100d iops

ide: enabling nas100d iops

IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank

 Intel/Sharp Extended Query Table at 0x0031

Using buffer write method

cfi_cmdset_0001: Erase suspend on write enabled

Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0xfe0000

8 RedBoot partitions found on MTD device IXP4XX-Flash.0

Creating 8 MTD partitions on "IXP4XX-Flash.0":

0x00000000-0x00040000 : "RedBoot"

0x00040000-0x00240000 : "kernel"

0x00240000-0x00840000 : "filesystem"

0x00840000-0x00ec0000 : "usr"

0x00ec0000-0x00f40000 : "LudeBoot"

0x00f40000-0x00fc0000 : "sysconfig"

0x00fc0000-0x00fc1000 : "RedBoot config"

mtd: partition "RedBoot config" doesn't end on an erase block -- force read-only

0x00fe0000-0x01000000 : "FIS directory"

PCI: enabling device 0000:00:03.2 (0140 -> 0142)

PCI: Via IRQ fixup for 0000:00:03.2, from 24 to 8

ehci_hcd 0000:00:03.2: EHCI Host Controller

ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1

ehci_hcd 0000:00:03.2: irq 24, io mem 0x48020000

ehci_hcd 0000:00:03.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 4 ports detected

hub 1-0:1.0: over-current change on port 1

Initializing USB Mass Storage driver...

hub 1-0:1.0: over-current change on port 2

usb 1-3: new high speed USB device using ehci_hcd and address 2

scsi0 : SCSI emulation for USB Mass Storage devices

usbcore: registered new driver usb-storage

USB Mass Storage support registered.

i2c /dev entries driver

NET: Registered protocol family 2

IP route cache hash table entries: 1024 (order: 0, 4096 bytes)

TCP established hash table entries: 4096 (order: 2, 16384 bytes)

TCP bind hash table entries: 4096 (order: 2, 16384 bytes)

TCP: Hash tables configured (established 4096 bind 4096)

TCP reno registered

TCP bic registered

NET: Registered protocol family 1

VFS: Mounted root (jffs2 filesystem).

Freeing init memory: 84K

  Vendor: Imation   Model: Flash Drive       Rev: 1.00

  Type:   Direct-Access                      ANSI SCSI revision: 02

SCSI device sda: 1003520 512-byte hdwr sectors (514 MB)

sda: Write Protect is off

sda: assuming drive cache: write through

SCSI device sda: 1003520 512-byte hdwr sectors (514 MB)

sda: Write Protect is off

sda: assuming drive cache: write through

 sda: sda1 sda2

Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0

aec62xx: using config 3

AEC6880: IDE controller at PCI slot 0000:00:01.0

PCI: enabling device 0000:00:01.0 (0140 -> 0141)

AEC6880: chipset revision 7

AEC6880: nas100d ports enable

AEC6880: ROM enabled at 0x48000000

AEC6880: 100% native mode on irq 28

    ide0: BM-DMA at 0x1040-0x1047, BIOS settings: hda:pio, hdb:pio

aec62xx: enabling nas100d iops

    ide1: BM-DMA at 0x1048-0x104f, BIOS settings: hdc:pio, hdd:pio

aec62xx: enabling nas100d iops

hda: HDS722516VLAT80, ATA DISK drive

ide0 at 0x1050-0x1057,0x1062 on irq 28

hda: max request size: 1024KiB

hda: 321672960 sectors (164696 MB) w/7938KiB Cache, CHS=20023/255/63

hda: cache flushes supported

 hda: hda1 hda2 hda3 hda4

ehci_hcd 0000:00:03.2: HC died; cleaning up

usb 1-3: USB disconnect, address 2

cat: /proc/mounts: No such file or directory
boot: rootfs: mount -t ext3 -o defaults /dev/hda2
mount: Mounting /dev/hda2 on /mnt failed: No such file or directory

INIT: version 2.86 booting LudeOS booting...
Creating initial device nodes...
mount: Mounting /dev/mtdblock3 on /initrd failed: Invalid argument
Starting syslogd/klogd: done
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... ixp400: module license 'unspecified' taints kernel.

ixp400_eth: Initializing IXP400 NPE Ethernet driver software v. LE  

ixp400_eth: CPU clock speed (approx) = 266 MHz

[debug3] OSAL: Mapping [addr 0x60000000:size 0x4000:endianType 1]

[debug3] OSAL: Found map [[debug3] qMgr[debug3] :addr 0x60000000: virt 0x0:size 0x4000:ref 0:endianType 5]

[debug3] OSAL: Mapping [addr 0xc8006000:size 0x1000:endianType 1]

[debug3] Osal: Checking [phys addr 0x60000000:size 0x4000:endianType 5]

[debug3] OSAL: Found map [[debug3] peripherals[debug3] :addr 0xc8000000: virt 0xffbf2000:size 0xc000:ref 0:endianType 3]

[debug3] OSAL: Mapping [addr 0xc8007000:size 0x1000:endianType 1]

[debug3] Osal: Checking [phys addr 0x60000000:size 0x4000:endianType 5]

[debug3] OSAL: Found map [[debug3] peripherals[debug3] :addr 0xc8000000: virt 0xffbf2000:size 0xc000:ref 1:endianType 3]

[debug3] OSAL: Mapping [addr 0xc8008000:size 0x1000:endianType 1]

[debug3] Osal: Checking [phys addr 0x60000000:size 0x4000:endianType 5]

[debug3] OSAL: Found map [[debug3] peripherals[debug3] :addr 0xc8000000: virt 0xffbf2000:size 0xc000:ref 2:endianType 3]

[debug3] OSAL: Mapping [addr 0xc8006000:size 0x1000:endianType 1]

[debug3] Osal: Checking [phys addr 0x60000000:size 0x4000:endianType 5]

[debug3] OSAL: Found map [[debug3] peripherals[debug3] :addr 0xc8000000: virt 0xffbf2000:size 0xc000:ref 3:endianType 3]

[debug3] OSAL: Mapping [addr 0xc8007000:size 0x1000:endianType 1]

[debug3] Osal: Checking [phys addr 0x60000000:size 0x4000:endianType 5]

[debug3] OSAL: Found map [[debug3] peripherals[debug3] :addr 0xc8000000: virt 0xffbf2000:size 0xc000:ref 4:endianType 3]

[debug3] OSAL: Mapping [addr 0xc8008000:size 0x1000:endianType 1]

[debug3] Osal: Checking [phys addr 0x60000000:size 0x4000:endianType 5]

[debug3] OSAL: Found map [[debug3] peripherals[debug3] :addr 0xc8000000: virt 0xffbf2000:size 0xc000:ref 5:endianType 3]

[debug3] OSAL: Mapping [addr 0xc4000000:size 0x1000:endianType 1]

[debug3] Osal: Checking [phys addr 0x60000000:size 0x4000:endianType 5]

[debug3] Osal: Checking [phys addr 0xc8000000:size 0xc000:endianType 3]

[debug3] OSAL: Found map [[debug3] Exp Cfg[debug3] :addr 0xc4000000: virt 0xffbfd000:size 0x1000:ref 0:endianType 3]

[warning] Warning: the NPE A component you specified does not exist

[debug3] OSAL: Mapping [addr 0xc8009000:size 0x1000:endianType 1]

[debug3] Osal: Checking [phys addr 0x60000000:size 0x4000:endianType 5]

[debug3] OSAL: Found map [[debug3] peripherals[debug3] :addr 0xc8000000: virt 0xffbf2000:size 0xc000:ref 6:endianType 3]

[debug3] OSAL: Mapping [addr 0xc8009000:size 0x1000:endianType 1]

[debug3] Osal: Checking [phys addr 0x60000000:size 0x4000:endianType 5]

[debug3] OSAL: Found map [[debug3] peripherals[debug3] :addr 0xc8000000: virt 0xffbf2000:size 0xc000:ref 7:endianType 3]

[debug3] OSAL: Mapping [addr 0xc800a000:size 0x1000:endianType 1]

[debug3] Osal: Checking [phys addr 0x60000000:size 0x4000:endianType 5]

[debug3] OSAL: Found map [[debug3] peripherals[debug3] :addr 0xc8000000: virt 0xffbf2000:size 0xc000:ref 8:endianType 3]

[error] ixEthMiiPhyScan : unexpected Mii PHY ID 00221619

ixp400_eth: ixp0 is using NPEB and the PHY at address 0

ixp400_eth: Use default MAC address 00:02:b3:01:01:01 for port 0

ixp400_eth: Use default MAC address 00:02:b3:02:02:02 for port 1

done.
Starting portmap daemon: portmap.
Nothing to be done

INIT: Entering runlevel: 3 Starting Dropbear SSH server: dropbear.

LudeOS 0.1-alpha nas100d ttyS0

nas100d login: exec
Using base address 0x00400000 and length 0x000f2960
Uncompressing Linux................................................................... done, booting the kernel.

Linux version 2.6.14 (rwhitby@sarge) (gcc version 3.4.4) #1 Sat Nov 12 04:52:48 CST 2005

CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE)

Machine: Iomega NAS 100d

Memory policy: ECC disabled, Data cache writeback

CPU0: D VIVT undefined 5 cache

CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets

CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets

Built 1 zonelists

Kernel command line: root=/dev/mtdblock3 rw rootfstype=jffs2 mem=64M@0x00000000 init=/linuxrc  noirqdebug console=ttyS0,115200n8

PID hash table entries: 512 (order: 9, 8192 bytes)

Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)

Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)

Memory: 64MB = 64MB total

Memory: 62720KB available (1853K code, 170K data, 84K init)

Mount-cache hash table entries: 512

CPU: Testing write buffer coherency: ok

NET: Registered protocol family 16

PCI: IXP4xx is host

PCI: IXP4xx Using indirect access for memory space

PCI: bus0: Fast back to back transfers disabled

dmabounce: registered device 0000:00:01.0 on pci bus

dmabounce: registered device 0000:00:02.0 on pci bus

dmabounce: registered device 0000:00:03.0 on pci bus

dmabounce: registered device 0000:00:03.1 on pci bus

dmabounce: registered device 0000:00:03.2 on pci bus

SCSI subsystem initialized

usbcore: registered new driver usbfs

usbcore: registered new driver hub

NetWinder Floating Point Emulator V0.97 (double precision)

JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.

Initializing Cryptographic API

IXP4xx Watchdog Timer: heartbeat 60 sec

Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled

ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale

ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale

io scheduler noop registered

io scheduler deadline registered

RAMDISK driver initialized: 4 RAM disks of 10240K size 1024 blocksize

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

ide: enabling nas100d iops

ide: enabling nas100d iops

ide: enabling nas100d iops

ide: enabling nas100d iops

IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank

 Intel/Sharp Extended Query Table at 0x0031

Using buffer write method

cfi_cmdset_0001: Erase suspend on write enabled

Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0xfe0000

8 RedBoot partitions found on MTD device IXP4XX-Flash.0

Creating 8 MTD partitions on "IXP4XX-Flash.0":

0x00000000-0x00040000 : "RedBoot"

0x00040000-0x00240000 : "kernel"

0x00240000-0x00840000 : "filesystem"

0x00840000-0x00ec0000 : "usr"

0x00ec0000-0x00f40000 : "LudeBoot"

0x00f40000-0x00fc0000 : "sysconfig"

0x00fc0000-0x00fc1000 : "RedBoot config"

mtd: partition "RedBoot config" doesn't end on an erase block -- force read-only

0x00fe0000-0x01000000 : "FIS directory"

PCI: enabling device 0000:00:03.2 (0140 -> 0142)

PCI: Via IRQ fixup for 0000:00:03.2, from 24 to 8

ehci_hcd 0000:00:03.2: EHCI Host Controller

ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1

ehci_hcd 0000:00:03.2: irq 24, io mem 0x48020000

ehci_hcd 0000:00:03.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 4 ports detected

hub 1-0:1.0: over-current change on port 1

Initializing USB Mass Storage driver...

hub 1-0:1.0: over-current change on port 2

usb 1-3: new high speed USB device using ehci_hcd and address 2

scsi0 : SCSI emulation for USB Mass Storage devices

usbcore: registered new driver usb-storage

USB Mass Storage support registered.

i2c /dev entries driver

NET: Registered protocol family 2

IP route cache hash table entries: 1024 (order: 0, 4096 bytes)

TCP established hash table entries: 4096 (order: 2, 16384 bytes)

TCP bind hash table entries: 4096 (order: 2, 16384 bytes)

TCP: Hash tables configured (established 4096 bind 4096)

TCP reno registered

TCP bic registered

NET: Registered protocol family 1

VFS: Mounted root (jffs2 filesystem).

Freeing init memory: 84K

  Vendor: Imation   Model: Flash Drive       Rev: 1.00

  Type:   Direct-Access                      ANSI SCSI revision: 02

SCSI device sda: 1003520 512-byte hdwr sectors (514 MB)

sda: Write Protect is off

sda: assuming drive cache: write through

SCSI device sda: 1003520 512-byte hdwr sectors (514 MB)

sda: Write Protect is off

sda: assuming drive cache: write through

 sda: sda1 sda2

Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0

aec62xx: using config 3

AEC6880: IDE controller at PCI slot 0000:00:01.0

PCI: enabling device 0000:00:01.0 (0140 -> 0141)

AEC6880: chipset revision 7

AEC6880: nas100d ports enable

AEC6880: ROM enabled at 0x48000000

AEC6880: 100% native mode on irq 28

    ide0: BM-DMA at 0x1040-0x1047, BIOS settings: hda:pio, hdb:pio

aec62xx: enabling nas100d iops

    ide1: BM-DMA at 0x1048-0x104f, BIOS settings: hdc:pio, hdd:pio

aec62xx: enabling nas100d iops

hda: HDS722516VLAT80, ATA DISK drive

ide0 at 0x1050-0x1057,0x1062 on irq 28

hda: max request size: 1024KiB

hda: 321672960 sectors (164696 MB) w/7938KiB Cache, CHS=20023/255/63

hda: cache flushes supported

 hda: hda1 hda2 hda3 hda4

ehci_hcd 0000:00:03.2: HC died; cleaning up

usb 1-3: USB disconnect, address 2

cat: /proc/mounts: No such file or directory
boot: rootfs: mount -t ext3 -o defaults /dev/hda2
mount: Mounting /dev/hda2 on /mnt failed: No such file or directory

INIT: version 2.86 booting LudeOS booting...
Creating initial device nodes...
mount: Mounting /dev/mtdblock3 on /initrd failed: Invalid argument
Starting syslogd/klogd: done
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... ixp400: module license 'unspecified' taints kernel.

ixp400_eth: Initializing IXP400 NPE Ethernet driver software v. LE  

ixp400_eth: CPU clock speed (approx) = 266 MHz

[debug3] OSAL: Mapping [addr 0x60000000:size 0x4000:endianType 1]

[debug3] OSAL: Found map [[debug3] qMgr[debug3] :addr 0x60000000: virt 0x0:size 0x4000:ref 0:endianType 5]

[debug3] OSAL: Mapping [addr 0xc8006000:size 0x1000:endianType 1]

[debug3] Osal: Checking [phys addr 0x60000000:size 0x4000:endianType 5]

[debug3] OSAL: Found map [[debug3] peripherals[debug3] :addr 0xc8000000: virt 0xffbf2000:size 0xc000:ref 0:endianType 3]

[debug3] OSAL: Mapping [addr 0xc8007000:size 0x1000:endianType 1]

[debug3] Osal: Checking [phys addr 0x60000000:size 0x4000:endianType 5]

[debug3] OSAL: Found map [[debug3] peripherals[debug3] :addr 0xc8000000: virt 0xffbf2000:size 0xc000:ref 1:endianType 3]

[debug3] OSAL: Mapping [addr 0xc8008000:size 0x1000:endianType 1]

[debug3] Osal: Checking [phys addr 0x60000000:size 0x4000:endianType 5]

[debug3] OSAL: Found map [[debug3] peripherals[debug3] :addr 0xc8000000: virt 0xffbf2000:size 0xc000:ref 2:endianType 3]

[debug3] OSAL: Mapping [addr 0xc8006000:size 0x1000:endianType 1]

[debug3] Osal: Checking [phys addr 0x60000000:size 0x4000:endianType 5]

[debug3] OSAL: Found map [[debug3] peripherals[debug3] :addr 0xc8000000: virt 0xffbf2000:size 0xc000:ref 3:endianType 3]

[debug3] OSAL: Mapping [addr 0xc8007000:size 0x1000:endianType 1]

[debug3] Osal: Checking [phys addr 0x60000000:size 0x4000:endianType 5]

[debug3] OSAL: Found map [[debug3] peripherals[debug3] :addr 0xc8000000: virt 0xffbf2000:size 0xc000:ref 4:endianType 3]

[debug3] OSAL: Mapping [addr 0xc8008000:size 0x1000:endianType 1]

[debug3] Osal: Checking [phys addr 0x60000000:size 0x4000:endianType 5]

[debug3] OSAL: Found map [[debug3] peripherals[debug3] :addr 0xc8000000: virt 0xffbf2000:size 0xc000:ref 5:endianType 3]

[debug3] OSAL: Mapping [addr 0xc4000000:size 0x1000:endianType 1]

[debug3] Osal: Checking [phys addr 0x60000000:size 0x4000:endianType 5]

[debug3] Osal: Checking [phys addr 0xc8000000:size 0xc000:endianType 3]

[debug3] OSAL: Found map [[debug3] Exp Cfg[debug3] :addr 0xc4000000: virt 0xffbfd000:size 0x1000:ref 0:endianType 3]

[warning] Warning: the NPE A component you specified does not exist

[debug3] OSAL: Mapping [addr 0xc8009000:size 0x1000:endianType 1]

[debug3] Osal: Checking [phys addr 0x60000000:size 0x4000:endianType 5]

[debug3] OSAL: Found map [[debug3] peripherals[debug3] :addr 0xc8000000: virt 0xffbf2000:size 0xc000:ref 6:endianType 3]

[debug3] OSAL: Mapping [addr 0xc8009000:size 0x1000:endianType 1]

[debug3] Osal: Checking [phys addr 0x60000000:size 0x4000:endianType 5]

[debug3] OSAL: Found map [[debug3] peripherals[debug3] :addr 0xc8000000: virt 0xffbf2000:size 0xc000:ref 7:endianType 3]

[debug3] OSAL: Mapping [addr 0xc800a000:size 0x1000:endianType 1]

[debug3] Osal: Checking [phys addr 0x60000000:size 0x4000:endianType 5]

[debug3] OSAL: Found map [[debug3] peripherals[debug3] :addr 0xc8000000: virt 0xffbf2000:size 0xc000:ref 8:endianType 3]

[error] ixEthMiiPhyScan : unexpected Mii PHY ID 00221619

ixp400_eth: ixp0 is using NPEB and the PHY at address 0

ixp400_eth: Use default MAC address 00:02:b3:01:01:01 for port 0

ixp400_eth: Use default MAC address 00:02:b3:02:02:02 for port 1

done.
Starting portmap daemon: portmap.
Nothing to be done

INIT: Entering runlevel: 3 Starting Dropbear SSH server: dropbear.

LudeOS 0.1-alpha nas100d ttyS0

nas100d login: