smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family Device Model: ST3160023A Serial Number: 3LJ23F82 Firmware Version: 8.01 User Capacity: 160,041,885,696 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Wed Dec 20 01:06:52 2006 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 111) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 065 060 006 Pre-fail Always - 105787549 3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 109 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 082 060 030 Pre-fail Always - 200300745 9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 6727 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 2010 194 Temperature_Celsius 0x0022 029 066 000 Old_age Always - 29 195 Hardware_ECC_Recovered 0x001a 065 060 000 Old_age Always - 105787549 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 193 000 Old_age Always - 7 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 64 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 64 occurred at disk power-on lifetime: 6715 hours (279 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 07 62 d9 24 e0 Error: UNC at LBA = 0x0024d962 = 2414946 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 29 00 08 61 d9 24 e0 00 00:13:34.912 READ MULTIPLE EXT 29 00 e0 89 d8 24 e0 00 00:13:34.881 READ MULTIPLE EXT 29 00 08 81 d8 24 e0 00 00:13:34.856 READ MULTIPLE EXT 29 00 00 b9 d5 24 e0 00 00:13:34.833 READ MULTIPLE EXT 29 00 00 31 d4 24 e0 00 00:13:34.811 READ MULTIPLE EXT Error 63 occurred at disk power-on lifetime: 6715 hours (279 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 0f 5a d9 24 e0 Error: UNC at LBA = 0x0024d95a = 2414938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 29 00 e0 89 d8 24 e0 00 00:13:34.912 READ MULTIPLE EXT 29 00 08 81 d8 24 e0 00 00:13:34.881 READ MULTIPLE EXT 29 00 00 b9 d5 24 e0 00 00:13:34.856 READ MULTIPLE EXT 29 00 00 31 d4 24 e0 00 00:13:34.833 READ MULTIPLE EXT 29 00 00 31 d3 24 e0 00 00:13:34.811 READ MULTIPLE EXT Error 62 occurred at disk power-on lifetime: 6715 hours (279 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 63 d9 24 e0 Error: UNC at LBA = 0x0024d963 = 2414947 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 c0 a9 d8 24 e0 00 00:00:35.811 READ DMA EXT 25 00 c8 a1 d8 24 e0 00 00:00:31.912 READ DMA EXT 25 00 d0 99 d8 24 e0 00 00:00:27.965 READ DMA EXT 25 00 d8 91 d8 24 e0 00 00:00:23.999 READ DMA EXT 25 00 e0 89 d8 24 e0 00 00:00:23.991 READ DMA EXT Error 61 occurred at disk power-on lifetime: 6715 hours (279 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 63 d9 24 e0 Error: UNC at LBA = 0x0024d963 = 2414947 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 c8 a1 d8 24 e0 00 00:00:35.811 READ DMA EXT 25 00 d0 99 d8 24 e0 00 00:00:31.912 READ DMA EXT 25 00 d8 91 d8 24 e0 00 00:00:27.965 READ DMA EXT 25 00 e0 89 d8 24 e0 00 00:00:23.999 READ DMA EXT 25 00 08 81 d8 24 e0 00 00:00:23.991 READ DMA EXT Error 60 occurred at disk power-on lifetime: 6715 hours (279 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 63 d9 24 e0 Error: UNC at LBA = 0x0024d963 = 2414947 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 d0 99 d8 24 e0 00 00:00:23.911 READ DMA EXT 25 00 d8 91 d8 24 e0 00 00:00:31.912 READ DMA EXT 25 00 e0 89 d8 24 e0 00 00:00:27.965 READ DMA EXT 25 00 08 81 d8 24 e0 00 00:00:23.999 READ DMA EXT 25 00 00 b9 d5 24 e0 00 00:00:23.991 READ DMA EXT SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 90% 6716 304404835 # 2 Short offline Completed: read failure 90% 6715 304404835 # 3 Extended offline Completed: read failure 90% 6715 304404835 # 4 Short offline Completed: read failure 90% 6715 304404835 # 5 Short offline Completed: read failure 90% 6715 304404835 # 6 Short offline Completed: read failure 90% 6715 304404835 # 7 Short offline Completed: read failure 90% 6715 304404835 # 8 Short offline Completed: read failure 90% 6715 304404835 # 9 Short offline Completed: read failure 90% 6715 304404835 #10 Short offline Completed: read failure 90% 6715 304404835 #11 Short offline Completed without error 00% 5959 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.