RedBoot(tm) bootstrap and debug environment [ROM]
Red Hat certified release, version 1.92 - built 21:22:36, Jun 11 2004

Platform: IXDP425 Development Platform (XScale) 
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.

RAM: 0x00000000-0x04000000, 0x0001c798-0x03fd1000 available
FLASH: 0x50000000 - 0x51000000, 128 blocks of 0x00020000 bytes each.
script is fis load LudeBoot
go

== Executing boot script in 5.000 seconds - enter ^C to abort
RedBoot> fis load LudeBoot
RedBoot> go
+DB: (FeatureScan) NpeDl did not provide the image ID for NPE port 1

Trying NPE-B...[error] ixEthMiiPhyScan : unexpected Mii PHY0 ID 00221619
success. Using NPE-B with PHY 0.
Ethernet eth0: MAC address 00:03:2f:27:57:0f
IP: 192.168.0.7/255.255.0.0, Gateway: 192.168.0.254
Default server: 192.168.0.254

RedBoot(tm) bootstrap and debug environment [RAM]
Non-certified release, version 0.3 of LudeBoot - built 06:53:44, Nov 12 2005

Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.

RAM: 0x00000000-0x04000000, [0x0015ee88-0x03fc1000] available
FLASH: 0x50000000 - 0x51000000, 128 blocks of 0x00020000 bytes each.
== Executing boot script in 5.000 seconds - enter ^C to abort
RedBoot> fis load kernel
RedBoot> exec
Using base address 0x00400000 and length 0x000f8a9c
Uncompressing Linux.................................................................... done, booting the kernel.

Linux version 2.6.15 (rwhitby@sarge) (gcc version 3.4.4) #1 Thu Nov 17 14:24:17 CST 2005

CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE)

Machine: Iomega NAS 100d

Memory policy: ECC disabled, Data cache writeback

CPU0: D VIVT undefined 5 cache

CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets

CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets

Built 1 zonelists

Kernel command line: root=/dev/mtdblock3 rw rootfstype=jffs2 mem=64M@0x00000000 init=/linuxrc noirqdebug console=ttyS0,115200n8

PID hash table entries: 512 (order: 9, 8192 bytes)

Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)

Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)

Memory: 64MB = 64MB total

Memory: 62592KB available (1896K code, 171K data, 84K init)

Mount-cache hash table entries: 512

CPU: Testing write buffer coherency: ok

NET: Registered protocol family 16

PCI: IXP4xx is host

PCI: IXP4xx Using indirect access for memory space

PCI: bus0: Fast back to back transfers disabled

dmabounce: registered device 0000:00:01.0 on pci bus

dmabounce: registered device 0000:00:02.0 on pci bus

dmabounce: registered device 0000:00:03.0 on pci bus

dmabounce: registered device 0000:00:03.1 on pci bus

dmabounce: registered device 0000:00:03.2 on pci bus

usbcore: registered new driver usbfs

usbcore: registered new driver hub

SCSI subsystem initialized

NetWinder Floating Point Emulator V0.97 (double precision)

JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.

Initializing Cryptographic API

io scheduler noop registered

io scheduler deadline registered

PCI: enabling device 0000:00:03.2 (0140 -> 0142)

PCI: Via IRQ fixup for 0000:00:03.2, from 24 to 8

ehci_hcd 0000:00:03.2: EHCI Host Controller

ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1

ehci_hcd 0000:00:03.2: irq 24, io mem 0x48020000

ehci_hcd 0000:00:03.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 4 ports detected

hub 1-0:1.0: over-current change on port 1

USB Universal Host Controller Interface driver v2.3

PCI: enabling device 0000:00:03.0 (0140 -> 0141)

PCI: Via IRQ fixup for 0000:00:03.0, from 26 to 10

uhci_hcd 0000:00:03.0: UHCI Host Controller

uhci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2

uhci_hcd 0000:00:03.0: irq 26, io base 0x00001000

hub 2-0:1.0: USB hub found

hub 2-0:1.0: 2 ports detected

hub 1-0:1.0: over-current change on port 2

PCI: enabling device 0000:00:03.1 (0140 -> 0141)

PCI: Via IRQ fixup for 0000:00:03.1, from 25 to 9

uhci_hcd 0000:00:03.1: UHCI Host Controller

uhci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3

uhci_hcd 0000:00:03.1: irq 25, io base 0x00001020

hub 3-0:1.0: USB hub found

hub 3-0:1.0: 2 ports detected

Initializing USB Mass Storage driver...

usb 1-3: new high speed USB device using ehci_hcd and address 2

scsi0 : SCSI emulation for USB Mass Storage devices

usbcore: registered new driver usb-storage

USB Mass Storage support registered.

IXP4xx Watchdog Timer: heartbeat 60 sec

Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled

serial8250.0: ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale

serial8250.0: ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale

RAMDISK driver initialized: 4 RAM disks of 10240K size 1024 blocksize

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

IXP4XXFlash: map_probe failed

i2c /dev entries driver

NET: Registered protocol family 2

IP route cache hash table entries: 1024 (order: 0, 4096 bytes)

TCP established hash table entries: 4096 (order: 2, 16384 bytes)

TCP bind hash table entries: 4096 (order: 2, 16384 bytes)

TCP: Hash tables configured (established 4096 bind 4096)

TCP reno registered

TCP bic registered

NET: Registered protocol family 1

Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)