debian:/home/hackphil/Drivers_ipw2200/ieee80211-1.2.15# cat Makefile
#
# Makefile for the ieee80211 kernel subsystem
#
# Original makefile by Peter Johanson (from ipw2100)
#
# NOTE: This make file can serve as both an external Makefile (launched
#       directly by the user), or as the sub-dir Makefile used by the kernel
#       build system.
#
# We assume that this build supercedes any in-kernel configurations.
EXTERNAL_BUILD=y
CONFIG_IEEE80211=m
CONFIG_IEEE80211_DEBUG=y

# We have to add drivers/net/wireless until ieee802_11.h is in the default
# include path
ifneq ($(CONFIG_IEEE80211_DEBUG),)
        EXTRA_CFLAGS += -g -Wa,-adhlms=$@.lst
endif

ifdef KBUILD_EXTMOD
        EXTRA_CFLAGS += -I$(KBUILD_EXTMOD)
endif

ifeq ($(IEEE80211_INC),)
        IEEE80211_INC := /lib/modules/$(shell uname -r)/include
endif

list-m :=

ifeq ($(CONFIG_IEEE80211),y)
CONFIG_IEEE80211=m
endif
# If you do not want any encryption/decryption code in the driver, comment
# out this line:
CONFIG_IEEE80211_CRYPT=$(CONFIG_IEEE80211)

# If you want to build WPA support, uncomment this line:
CONFIG_IEEE80211_CRYPT_WEP=$(CONFIG_IEEE80211)
CONFIG_IEEE80211_CRYPT_TKIP=$(CONFIG_IEEE80211)
CONFIG_IEEE80211_CRYPT_CCMP=$(CONFIG_IEEE80211)

list-$(CONFIG_IEEE80211) += ieee80211
list-$(CONFIG_IEEE80211) += ieee80211_crypt
list-$(CONFIG_IEEE80211_CRYPT_WEP) += ieee80211_crypt_wep
list-$(CONFIG_IEEE80211_CRYPT_CCMP) += ieee80211_crypt_ccmp
list-$(CONFIG_IEEE80211_CRYPT_TKIP) += ieee80211_crypt_tkip

obj-$(CONFIG_IEEE80211) += ieee80211.o ieee80211_crypt.o
obj-$(CONFIG_IEEE80211_CRYPT_WEP) += ieee80211_crypt_wep.o
obj-$(CONFIG_IEEE80211_CRYPT_CCMP) += ieee80211_crypt_ccmp.o
obj-$(CONFIG_IEEE80211_CRYPT_TKIP) += ieee80211_crypt_tkip.o
ieee80211-objs := \
        ieee80211_module.o \
        ieee80211_tx.o \
        ieee80211_rx.o \
        ieee80211_wx.o \
        ieee80211_geo.o

ieee80211_inc := ieee80211.h ieee80211_crypt.h ieee80211_radiotap.h

#
# Begin dual Makefile mode here.  First we provide support for when we
# are being invoked by the kernel build system
#
ifneq ($(KERNELRELEASE),)

#
# If you receive a compile message about multiple definitions of
# CONFIG_IEEE80211_DEBUG, then you have IEEE80211 into the full
# kernel build, and these definitions are now being set up by the kernel
# build system.
#
# To correct this, remove any CONFIG_IEEE80211... entries from
# $(KSRC)/.config and $(KSRC)/include/linux/autoconf.h
#

ifeq ($(EXTERNAL_BUILD),y)
ifeq ($(CONFIG_IEEE80211_DEBUG),y)
EXTRA_CFLAGS += -DCONFIG_IEEE80211_DEBUG
endif
# Checking against 'y' doesn't make sense since this if for external
# builds only
ifeq ($(CONFIG_IEEE80211_CRYPT_WEP),m)
EXTRA_CFLAGS += -DCONFIG_IEEE80211_CRYPT_WEP
endif
ifeq ($(CONFIG_IEEE80211_CRYPT_TKIP),m)
EXTRA_CFLAGS += -DCONFIG_IEEE80211_CRYPT_TKIP
endif
ifeq ($(CONFIG_IEEE80211_CRYPT_CCMP),m)
EXTRA_CFLAGS += -DCONFIG_IEEE80211_CRYPT_CCMP
endif
endif

else
# Here we begin the portion that is executed if the user invoked this Makefile
# directly.

# To make this as easy on the user as possible, we first check for any
# pre-existing in-kernel definitions of ieee80211 components that might
# conflict with this build system...

# KSRC should be set to the path to your sources
# modules are installed into KMISC
KVER  := $(shell uname -r)
KSRC := /lib/modules/$(KVER)/build
KMISC := /lib/modules/$(KVER)/net/ieee80211/
KMISC_INC := /lib/modules/$(KVER)/build/include/net/

# KSRC_OUTPUT should be overridden if you are using a 2.6 kernel that
# has it's output sent elsewhere via KBUILD_OUTPUT= or O=
KSRC_OUTPUT := $(KSRC)

# If we find Rules.make, we can assume we're using the old 2.4 style building
OLDMAKE=$(wildcard $(KSRC)/Rules.make)
PWD=$(shell pwd)

VERFILE := $(KSRC_OUTPUT)/include/linux/version.h
KERNELRELEASE := $(shell \
        if [ -r $(VERFILE) ]; then \
                (cat $(VERFILE); echo UTS_RELEASE) | \
                $(CC) -I$(KSRC_OUTPUT) $(CFLAGS) -E - | \
                tail -n 1 | \
                xargs echo; \
        else \
                uname -r; \
        fi)

MODPATH := $(DESTDIR)/lib/modules/$(KERNELRELEASE)

all: check_old modules

check_old:
        @$(SHELL) $(PWD)/remove-old $(KSRC) || \
                (echo "Old ieee80211 references found.  In order to build the ieee80211"; \
                echo "subsystem, prior versions must first be removed.  You can perform"; \
                echo "this task by running this makefile as root via:"; \
                echo; \
                echo "    % sudo make check_old"; \
                echo; \
                echo "and answering Y to remove the file references."; \
                echo "Aborting make." && \
                        exit 1)

clean:
        rm -f *.mod.c *.mod *.o *.ko .*.cmd .*.flags *.lst *~ .#*
        rm -rf $(PWD)/tmp .tmp_versions Modules.symvers
        for file in *.{c,h} net/*.h; do \
                if [ -e $$file ]; then \
                        sed -i -e "s:\ *$$::g" -e "s:\t*$$::g" $$file; \
                fi \
        done

modules:
        $(MAKE) -C $(KSRC) M=$(PWD) modules

check_path:
        @if [ "$(IEEE80211_INC)" = "" ]; then \
                echo -e \
"\n You need to provide the IEEE80211 target include path when running\n"\
"make install.  For example:\n\n"\
"\t% make IEEE80211_INC=/usr/include install\n\n"\
"will install the header files into /usr/include/net.\n"; \
                exit 1; \
        fi

override IEEE80211_INC := \
        `echo $(IEEE80211_INC) | grep "/net\$$" || \
                echo $(IEEE80211_INC)/net`

patch_kernel:
        @echo -e \
"\n This will install this IEEE80211 subsystem into your\n"\
" kernel tree located here:\n"\
"\n${KSRC}\n\n"\
" If you would like to instal to a different location, run\n"\
" this as follows: make KSRC=/path/to/kernel patch_kernel \n"
        @(read -p "Do you wish to continue? [Yn] " reply; \
        case $$reply in \
                Y|y|"") exit 0 ;; \
                *) echo "Terminating patch prcoess." ; exit 1 ;; \
        esac)
        @if [ "$(shell whoami)" != "root" ]; then \
            echo -e \
"\nIf this fails, you may need to be root to patch the kernel.\n" ; \
        fi
        @[ -e ${KSRC}/net/ieee80211 ] || \
                mkdir ${KSRC}/net/ieee80211
        @cp {*.c,in-tree/{Makefile,Kconfig}} \
                ${KSRC}/net/ieee80211/
        @cp net/*.h ${KSRC}/include/net/
        @(grep -q "ieee80211" ${KSRC}/net/Makefile || \
                echo \
"obj-\$$(CONFIG_IEEE80211)         += ieee80211/" >> \
                ${KSRC}/net/Makefile)
        @(grep -q "ieee80211" ${KSRC}/net/Kconfig || \
                sed -ie "s:^\(endif.*# if NET\):source \"net/ieee80211/Kconfig\"\n\n\1:g" \
                ${KSRC}/net/Kconfig)
        @echo -e "Kernel has been udpated to this IEEE80211 subsystem.\n"

install: check_path modules
        install -d $(KMISC)
        install -m 644 -c $(addsuffix .ko,$(list-m)) $(KMISC)
        install -d $(IEEE80211_INC)
        install -m 644 -c $(addprefix net/,$(ieee80211_inc)) $(IEEE80211_INC)
        -cp Modules.symvers $(KMISC)
        -mkdir -p $(KMISC)/.tmp_versions
        cd .tmp_versions && install -m 644 -c $(addsuffix .mod,$(list-m)) $(KMISC)/.tmp_versions
        /sbin/depmod -a ${KVER}

uninstall:
        rm -rf $(addprefix $(KMISC),$(addsuffix .ko,$(list-m)))
        rm -rf $(addprefix $(KMISC_INC), $(ieee80211_inc))
        /sbin/depmod -a ${KVER}

endif # End of internal build

.PHONY: TAGS tags check_old check_path all

RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS \) -prune -o
define all-sources
        ( find . $(RCS_FIND_IGNORE) -name '*.[chS]' -print )
endef

TAGS:
        $(all-sources) | etags -
tags:
        rm -f $@
        CTAGSF=`ctags --version | grep -i exuberant >/dev/null && echo "-I __initdata,__exitdata,EXPORT_SYMBOL,EXPORT_SYMBOL_NOVERS"`; \
        $(all-sources) | xargs ctags $$CTAGSF -a

debian:/home/hackphil/Drivers_ipw2200/ieee80211-1.2.15#