debian:/home/hackphil/Drivers_ipw2200/ipw2200-1.2.0# cat Makefile
#
# Makefile for the Linux Wireless network device drivers.
#
# Original makefile by Peter Johanson
#
# NOTE: This make file can serve as both an external Makefile (launched
#       directly by the user), or as the sub-dir Makefile used by the kernel
#       build system.

# If CONFIG_IPW* isn't set, we'll assume the user has never configured
# their kernel to include this module and set up some defaults.
#
# NOTE: If you have previously added the IPW project to your kernel
#       and configured it for inclusion, these settings will be
#       overridden by your kernel configuration.
ifndef CONFIG_IPW2200
EXTERNAL_BUILD=y
CONFIG_IPW2200=m
CONFIG_IPW2200_DEBUG=y
CONFIG_IPW2200_QOS=y

# If you are not interested in using monitor mode, simply comment out:
#
# NOTE:  If you have problems compiling due to IW_MODE_MONITOR not being
#        defined then you need to update the wireless extension version
#        installed in your kernel, or comment this line out.
CONFIG_IPW2200_MONITOR=y

# If you are interested in using radiotap headers in monitor mode,
# simply uncomment:
#
# NOTE:  To use RADIOTAP you must also enable MONITOR above.
#CONFIG_IPW2200_RADIOTAP=y

# The above monitor mode provides standard monitor mode.  The following
# will create a new interface (named rtap%d) which will be sent all
# 802.11 frames received on the interface
#
# NOTE:  To use PROMISCUOUS you must also enable MONITOR above.
#CONFIG_IPW2200_PROMISCUOUS=y

endif

# We have to add drivers/net/wireless until ieee802_11.h is in the default
# include path
EXTRA_CFLAGS += -I$(TOPDIR)/drivers/net/wireless

ifeq ($(IEEE80211_INC),)
        IEEE80211_INC := /lib/modules/$(shell uname -r)/include
        IEEE80211_MODVERDIR=/lib/modules/$(KVER)/net/ieee80211/.tmp_versions
else
        IEEE80211_MODVERDIR=$(IEEE80211_INC)/.tmp_versions
endif
EXTRA_CFLAGS += -I$(IEEE80211_INC)

ifeq ($(CONFIG_IPW2200_DEBUG),y)
        EXTRA_CFLAGS += -g -Wa,-adhlms=$@.lst
endif

ifdef KBUILD_EXTMOD
        EXTRA_CFLAGS += -I$(KBUILD_EXTMOD) -DKBUILD_EXTMOD
endif

list-m :=
list-$(CONFIG_IPW2200) += ipw2200
obj-$(CONFIG_IPW2200) += ipw2200.o

#
# Begin dual Makefile mode here.  First we provide support for when we
# are being invoked by the kernel build system
#
ifneq ($(KERNELRELEASE),)

#
# If you receive a compile message about multiple definitions of
# CONFIG_IPW2200_DEBUG, then you have IPW* into the full kernel build, and
# these definitions are now being set up by the kernel build system.
#
#
# To correct this, remove any CONFIG_{IPW,IEEE80211}* lines from
# $(KSRC)/.config and $(KSRC)/include/linux/autoconf.h
#

EXTRA_CFLAGS += -DCONFIG_PM

ifeq ($(EXTERNAL_BUILD),y)
ifeq ($(CONFIG_IPW2200_DEBUG),y)
EXTRA_CFLAGS += -DCONFIG_IPW2200_DEBUG
endif
ifeq ($(CONFIG_IPW2200_MONITOR),y)
EXTRA_CFLAGS += -DCONFIG_IPW2200_MONITOR
ifeq ($(CONFIG_IPW2200_RADIOTAP),y)
EXTRA_CFLAGS += -DCONFIG_IPW2200_RADIOTAP
endif
ifeq ($(CONFIG_IPW2200_PROMISCUOUS),y)
EXTRA_CFLAGS += -DCONFIG_IPW2200_PROMISCUOUS
endif
endif
ifeq ($(CONFIG_IPW2200_QOS),y)
EXTRA_CFLAGS += -DCONFIG_IPW2200_QOS
endif
endif

else
# Here we begin the portion that is executed if the user invoked this Makefile
# directly.

# KSRC should be set to the path to your sources
# modules are installed into KMISC
KVER  := $(shell uname -r)
KSRC := /lib/modules/$(KVER)/build
KMISC := /lib/modules/$(KVER)/kernel/drivers/net/wireless/
KMISC_INC := /lib/modules/$(KVER)/include

# KSRC_OUTPUT should be overridden if you are using a 2.6 kernel that
# has it's output sent elsewhere via KBUILD_OUTPUT= or O=
KSRC_OUTPUT := $(KSRC)

PWD=$(shell pwd)

VERFILE := $(KSRC_OUTPUT)/include/linux/version.h
KERNELRELEASE := $(shell \
        if [ -r $(VERFILE) ]; then \
                (cat $(VERFILE); echo UTS_RELEASE) | \
                $(CC) -I$(KSRC_OUTPUT) $(CFLAGS) -E - | \
                tail -n 1 | \
                xargs echo; \
        else \
                uname -r; \
        fi)

MODPATH := $(DESTDIR)/lib/modules/$(KERNELRELEASE)

all: check_inc modules

check_inc:
        @([ ! -e $(IEEE80211_INC)/net/ieee80211.h ] && \
        echo -e \
"\n ERROR: ieee80211.h not found in '$(IEEE80211_INC)'.\n\n"\
"You need to install the ieee80211 subsystem from http://ieee80211.sf.net\n"\
"and point this build to the location where you installed those sources, eg.:\n\n"\
"% make IEEE80211_INC=/usr/src/ieee80211/\n\n"\
"will look for ieee80211.h in /usr/src/ieee80211/net/\n") || exit 0
        @[ -e $(IEEE80211_INC)/net/ieee80211.h ]

clean:
        rm -f *.mod.c *.mod *.o *.ko .*.cmd .*.flags .lst *.lst
        rm -rf $(PWD)/tmp Modules.symvers
        for file in *.{c,h}; do \
                sed -i -e "s:\ *$$::g" -e "s:\t*$$::g" $$file; \
        done

distclean: clean
        rm -f tags TAGS

TMP=$(PWD)/tmp
MODVERDIR=$(TMP)/.tmp_versions

modules:
        mkdir -p $(MODVERDIR)
        -cp $(IEEE80211_MODVERDIR)/*.mod $(MODVERDIR)
        -cp $(IEEE80211_MODVERDIR)/../Modules.symvers $(PWD)
        $(MAKE) -C $(KSRC) M=$(PWD) MODVERDIR=$(MODVERDIR) modules


patch_kernel:
        @echo -e \
"\n This will install this IPW2200 driver into your\n"\
" kernel tree located here:\n"\
"\n${KSRC}\n\n"\
" If you would like to instal to a different location, run\n"\
" this as follows: make KSRC=/path/to/kernel patch_kernel \n"
        @(read -p "Do you wish to continue? [Yn] " reply; \
        case $$reply in \
                Y|y|"") exit 0 ;; \
                *) echo "Terminating patch prcoess." ; exit 1 ;; \
        esac)
        @if [ "$(shell whoami)" != "root" ]; then \
            echo -e \
"\nIf this fails, you may need to be root to patch the kernel.\n" ; \
        fi
        @(grep -q "ipw2200" ${KSRC}/drivers/net/wireless/Makefile || \
                echo \
"obj-\$$(CONFIG_IPW2200)         += ipw2200.o" >> \
                ${KSRC}/drivers/net/wireless/Makefile)
        @cp README.ipw2200 ${KSRC}/Documentation/networking
        @cp ipw2200.{c,h} ${KSRC}/drivers/net/wireless
        @cp compat.{c,h} ${KSRC}/drivers/net/wireless
        @cp in-tree/Kconfig.ipw2200 ${KSRC}/drivers/net/wireless
        @(grep -q "Kconfig\.ipw2200" ${KSRC}/drivers/net/wireless/Kconfig || \
        grep -q "IPW2200" ${KSRC}/drivers/net/wireless/Kconfig || \
                sed -i -e "s:^endmenu:source \"drivers/net/wireless/Kconfig.ipw2200\"\n\nendmenu:g" ${KSRC}/drivers/net/wireless/Kconfig)
        @echo -e "Kernel has been udpated to include this ipw2200 driver.\n"

install: modules
        install -d $(KMISC)
        install -m 644 -c $(addsuffix .ko,$(list-m)) $(KMISC)
        /sbin/depmod -a ${KVER}
        @echo "Don't forget to copy firmware to your hotplug's firmware directory and have the "
        @echo "hotplug tools in place."
        @echo "See INSTALL for more information."

uninstall:
        rm -rf $(addprefix $(KMISC),$(addsuffix .ko,$(list-m)))
        /sbin/depmod -a ${KVER}

endif # End of internal build


.PHONY: TAGS tags check_inc

RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS \) -prune -o
define all-sources
        ( find . $(RCS_FIND_IGNORE) -name '*.[chS]' -print )
endef

TAGS:
        $(all-sources) | etags -
tags:
        rm -f $@
        CTAGSF=`ctags --version | grep -i exuberant >/dev/null && echo "-I __initdata,__exitdata,EXPORT_SYMBOL,EXPORT_SYMBOL_NOVERS"`; \
        $(all-sources) | xargs ctags $$CTAGSF -a

debian:/home/hackphil/Drivers_ipw2200/ipw2200-1.2.0#