On node 0 totalpages: 196608 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 192512 pages, LIFO batch:31 DMI 2.3 present. Using APIC driver default ACPI: Unable to locate RSDP Allocating PCI resources starting at 40000000 (gap: 30000000:cffc0000) Detected 1260.084 MHz processor. Built 1 zonelists. Total pages: 196608 Kernel command line: ro root=LABEL=/ rhgb quiet Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (0160f000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c07ae000 soft=c078e000 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 773032k/786432k available (2139k kernel code, 12732k reserved, 866k data, 240k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 2520.67 BogoMIPS (lpj=1260337) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 64K (64 bytes/line) CPU: After all inits, caps: 0383f1ff c1c3f9ff 00000000 00000420 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 12k freed CPU0: AMD Duron(tm) stepping 01 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=424 bytes sizeof(dentry)=148 bytes sizeof(ext3inode)=600 bytes sizeof(buffer_head)=52 bytes sizeof(skbuff)=172 bytes sizeof(task_struct)=1392 bytes checking if image is initramfs... it is Freeing initrd memory: 1353k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Uncovering SIS18 that hid as a SIS503 (compatible=0) Boot video device is 0000:01:00.0 PCI: Using IRQ router SIS [1039/0018] at 0000:00:01.0 PCI: setting IRQ 11 as level-triggered PCI: Found IRQ 11 for device 0000:00:09.0 PCI: Sharing IRQ 11 with 0000:00:09.2 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default PCI: Bridge: 0000:00:02.0 IO window: a000-bfff MEM window: dbe00000-dbefffff PREFETCH window: cbc00000-dbcfffff PCI: Setting latency timer of device 0000:00:02.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 9, 2621440 bytes) TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) audit: initializing netlink socket (disabled) audit(1167323384.634:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 172537CBFDBE1E47 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected SiS 730 chipset agpgart: AGP aperture is 64M @ 0xe0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 0000:00:00.1 SIS5513: chipset revision 208 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS730 ATA 100 (1st gen) controller ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hdb: MAXTOR 6L020J1, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdd: LITE-ON DVDRW SOHW-1633S, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hdb: max request size: 128KiB hdb: 40132503 sectors (20547 MB) w/1818KiB Cache, CHS=42468/15/63, UDMA(100) hdb: cache flushes supported hdb: hdb1 hdb2 ide-floppy driver 0.99.newide usbcore: registered new driver libusual usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Processor cpuid 671 not supported Using IPI No-Shortcut mode Time: tsc clocksource has been installed. Freeing unused kernel memory: 240k freed Write protecting the kernel read-only data: 386k USB Universal Host Controller Interface driver v3.0 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) PCI: setting IRQ 5 as level-triggered PCI: Found IRQ 5 for device 0000:00:01.2 PCI: Sharing IRQ 5 with 0000:00:01.3 ohci_hcd 0000:00:01.2: OHCI Host Controller ohci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:01.2: irq 5, io mem 0xdfffc000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected PCI: Found IRQ 5 for device 0000:00:01.3 PCI: Sharing IRQ 5 with 0000:00:01.2 ohci_hcd 0000:00:01.3: OHCI Host Controller ohci_hcd 0000:00:01.3: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:01.3: irq 5, io mem 0xdfffd000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1167323390.588:2): selinux=0 auid=4294967295 input: PC Speaker as /class/input/input0 sis900.c: v1.08.10 Apr. 2 2006 PCI: setting IRQ 12 as level-triggered PCI: Found IRQ 12 for device 0000:00:01.1 0000:00:01.1: VIA 6103 PHY transceiver found at address 1. 0000:00:01.1: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 12, 00:0a:e6:cc:37:6e. hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 Linux video capture interface: v2.00 cx2388x v4l2 driver version 0.0.6 loaded PCI: Enabling device 0000:00:09.0 (0000 -> 0002) PCI: Found IRQ 11 for device 0000:00:09.0 PCI: Sharing IRQ 11 with 0000:00:09.2 CORE cx88[0]: subsystem: 14f1:0084, board: Geniatech DVB-S [card=52,autodetected] TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe cx2388x dvb driver version 0.0.6 loaded cx88[0]/0: found at 0000:00:09.0, rev: 5, irq: 11, latency: 64, mmio: 0x40000000 cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 PCI: Found IRQ 11 for device 0000:00:09.2 PCI: Sharing IRQ 11 with 0000:00:09.0 cx88[0]/2: found at 0000:00:09.2, rev: 5, irq: 11, latency: 64, mmio: 0xdc000000 cx88[0]/2: cx2388x based dvb card DVB: registering new adapter (cx88[0]). DVB: registering frontend 0 (Conexant CX24123/CX24109)... cx2388x blackbird driver version 0.0.6 loaded PCI: setting IRQ 10 as level-triggered PCI: Found IRQ 10 for device 0000:00:01.4 AC'97 1 does not respond - RESET AC'97 1 access error (not audio or modem codec) SI7018: the secondary codec - invalid access gameport: Trident 4DWave is pci0000:00:01.4/gameport0, speed 2130kHz ac97 codec read TIMEOUT [0x5a/0x1000c05a]!!! floppy0: no floppy controllers found lp: driver loaded but no devices found NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver [drm] Initialized drm 1.0.1 20051102 PCI: No IRQ known for interrupt pin A of device 0000:01:00.0. Please try using pci=biosirq. [drm] Initialized radeon 1.25.0 20060524 on minor 0 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.4 loaded EXT3 FS on hdb1, internal journal Adding 1052248k swap on /dev/hdb2. Priority:-1 extents:1 across:1052248k process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead. eth0: Media Link On 100mbps full-duplex eth0: no IPv6 routers present Bluetooth: Core ver 2.10 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: HIDP (Human Interface Emulation) ver 1.1 mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x2000000 mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x2000000 mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x2000000 agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode [drm] Setting GART location based on new memory map [drm] writeback test succeeded in 1 usecs [root@localhost scan]#