[tony@localhost Desktop]$ dmesg Linux version 2.6.17-5mdv (rtp@octopus.mandriva.com) (gcc version 4.1.1 20060724 (prerelease) (4.1.1-3mdk)) #1 SMP Wed Sep 13 14:32:31 EDT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001efc0000 (usable) BIOS-e820: 000000001efc0000 - 000000001efcf000 (ACPI data) BIOS-e820: 000000001efcf000 - 000000001f000000 (ACPI NVS) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 495MB LOWMEM available. found SMP MP-table at 000ff780 On node 0 totalpages: 126912 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 122816 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP (v000 ACPIAM ) @ 0x000f7160 ACPI: RSDT (v001 A M I OEMRSDT 0x06000510 MSFT 0x00000097) @ 0x1efc0000 ACPI: FADT (v002 A M I OEMFACP 0x06000510 MSFT 0x00000097) @ 0x1efc0200 ACPI: MADT (v001 A M I OEMAPIC 0x06000510 MSFT 0x00000097) @ 0x1efc0390 ACPI: MCFG (v001 A M I OEMMCFG 0x06000510 MSFT 0x00000097) @ 0x1efc03f0 ACPI: BOOT (v001 A M I OEMBOOT 0x06000510 MSFT 0x00000097) @ 0x1efc0430 ACPI: OEMB (v001 A M I AMI_OEM 0x06000510 MSFT 0x00000097) @ 0x1efcf040 ACPI: DSDT (v001 0AAAA 0AAAA000 0x00000000 INTL 0x02002026) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:9 APIC version 20 ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 20000000 (gap: 1f000000:dfd14000) Built 1 zonelists Kernel command line: auto BOOT_IMAGE=linux root=305 resume=/dev/hda6 splash=silent bootsplash: silent mode. mapped APIC to ffffe000 (fee00000) mapped IOAPIC to ffffd000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 1496.457 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 497964k/507648k available (2426k kernel code, 8648k reserved, 756k data, 244k init, 0k highmem, 0k BadRAM) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 2996.66 BogoMIPS (lpj=5993323) Mount-cache hash table entries: 512 CPU: After generic identify, caps: a7e9fbbf 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: a7e9fbbf 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 512K CPU: After all inits, caps: a7e9fbbf 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 16k freed checking if image is initramfs... it is Freeing initrd memory: 355k freed ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. CPU0: Intel(R) Celeron(R) M processor 1500MHz stepping 05 Total of 1 processors activated (2996.66 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Brought up 1 CPUs migration_cost=0 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 Setting up standard PCI resources ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH6 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #02 (-#05) is hidden behind transparent bridge #01 (-#02) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: Embedded Controller [EC0] (gpe 28) interrupt mode. ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 12) *11 ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *6 7 12) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 12) ACPI: Power Resource [GFAN] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 15 devices PnPBIOS: Disabled PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:0a: ioport range 0x230-0x2af has been reserved pnp: 00:0a: ioport range 0x290-0x29f has been reserved pnp: 00:0a: ioport range 0x230-0x23f has been reserved PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bus 2, cardbus bridge: 0000:01:01.0 IO window: 0000d000-0000d0ff IO window: 0000d400-0000d4ff PREFETCH window: 20000000-21ffffff MEM window: 22000000-23ffffff PCI: Bridge: 0000:00:1e.0 IO window: d000-dfff MEM window: fe800000-fe8fffff PREFETCH window: 20000000-21ffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 PCI: Enabling device 0000:01:01.0 (0105 -> 0107) ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 17 (level, low) -> IRQ 16 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered Simple Boot Flag at 0x52 set to 0x1 apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1167438766.600:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered vesafb: framebuffer at 0xd0000000, mapped to 0xdf880000, using 3750k, total 16064k vesafb: mode is 800x600x16, linelength=1600, pages=15 vesafb: protected mode interface info at 00ff:44f0 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 124058 bytes,<6>...found (800x600, 124010 bytes, v3). Console: switching to colour frame buffer device 93x31 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH6: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 17 ICH6: chipset revision 4 ICH6: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: TOSHIBA MK4026GAX, ATA DISK drive hdb: UJDA770 DVD/CDRW, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hda: max request size: 128KiB hda: 78140160 sectors (40007 MB), CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 < hda5 hda6 > PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered NET: Registered protocol family 1 Using IPI No-Shortcut mode ACPI wakeup devices: P0P1 LAN0 CBS0 MPCI MPC1 USB1 USB2 USB3 USB4 EUSB MC97 AZAC SLPB ACPI: (supports S0 S3 S4 S5) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 244k freed kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. input: AT Translated Set 2 keyboard as /class/input/input0 Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0 input: SynPS/2 Synaptics TouchPad as /class/input/input1 ts: Compaq touchscreen protocol output usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000e400 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e480 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 17, io base 0x0000e800 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000e880 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 3-2: new low speed USB device using uhci_hcd and address 2 usb 3-2: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 18, io mem 0xfeb3bc00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected usb 3-2: USB disconnect, address 2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver ieee1394: Initialized config rom entry `ip1394' usbcore: registered new driver usbmouse drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver ACPI: PCI Interrupt 0000:01:01.1[B] -> GSI 18 (level, low) -> IRQ 17 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[fe8fe800-fe8fefff] Max Packet=[2048] IR/IT contexts=[4/4] usb 3-2: new low speed USB device using uhci_hcd and address 3 usb 3-2: configuration #1 chosen from 1 choice input: Logitech USB-PS/2 Optical Mouse as /class/input/input2 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-2 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e018000338dc03] Non-volatile memory driver v1.2 hw_random hardware driver 1.0.0 loaded Asus Laptop ACPI Extras version 0.29 no string returned by INIT trying default values, supply the developers with your DSDT Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 915GM Chipset. agpgart: Detected 16124K stolen memory. agpgart: AGP aperture is 256M @ 0xd0000000 ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 17 (level, low) -> IRQ 16 Yenta: CardBus bridge found at 0000:01:01.0 [1043:10b7] Yenta: ISA IRQ mask 0x04b8, PCI irq 16 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff cs: IO port probe 0xd000-0xdfff: clean. pcmcia: parent PCI bridge Memory window: 0xfe800000 - 0xfe8fffff pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x21ffffff cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x370-0x37f cs: IO port probe 0x3e0-0x4ff: excluding 0x400-0x41f 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com EXT3 FS on hda5, internal journal Adding 1044184k swap on /dev/hda6. Priority:-1 extents:1 across:1044184k NTFS driver 2.1.27 [Flags: R/O DEBUG MODULE]. NTFS volume version 3.1. loop: loaded (max 8 devices, max 1 partitions per device) hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 124058 bytes,<6>...found (800x600, 124010 bytes, v3). bootsplash: status on console 0 changed to on ACPI: AC Adapter [AC0] (on-line) Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (3966 buckets, 31728 max) - 224 bytes per conntrack ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Lid Switch [LID] ACPI: Fan [FN00] (off) Using specific hotkey driver ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Thermal Zone [THRM] (54 C) ACPI: Video Device [VGA_P0P2] (multi-head: yes rom: no post: no) ACPI: Video Device [VGA_PCI0] (multi-head: yes rom: no post: no) Removing netfilter NETLINK layer. ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1b.0 to 64 NET: Registered protocol family 17 8139too Fast Ethernet driver 0.9.27 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 20 (level, low) -> IRQ 21 eth0: RealTek RTL8139 at 0xe0096c00, 00:13:d4:a2:5a:68, IRQ 21 eth0: Identified 8139 chip type 'RTL-8100B/8139D' eth0: link down ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.2kmpr ipw2200: Copyright(c) 2003-2006 Intel Corporation ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 22 (level, low) -> IRQ 22 ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection ipw2200: Detected geography ZZA (11 802.11bg channels, 13 802.11a channels) ieee80211_crypt: registered algorithm 'WEP' Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6 over IPv4 tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team martian source 255.255.255.255 from 192.168.0.2, on dev eth2 ll header: ff:ff:ff:ff:ff:ff:00:15:e9:d5:af:7c:08:00 Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (3966 buckets, 31728 max) - 224 bytes per conntrack ClusterIP Version 0.8 loaded successfully ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/ eth2: no IPv6 routers present [drm] Initialized drm 1.0.1 20051102 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 20 [drm] Initialized i915 1.4.0 20060119 on minor 0 eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) netfilter PSD loaded - (c) astaro AG IFWLOG: register target bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 12533 bytes, v3). bootsplash: status on console 0 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 12533 bytes, v3). bootsplash: status on console 1 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 12533 bytes, v3). bootsplash: status on console 2 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 12533 bytes, v3). bootsplash: status on console 3 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 12533 bytes, v3). bootsplash: status on console 4 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 12533 bytes, v3). bootsplash: status on console 5 changed to on floppy0: no floppy controllers found floppy0: no floppy controllers found floppy0: no floppy controllers found floppy0: no floppy controllers found SCSI subsystem initialized [tony@localhost Desktop]$