Linux version 2.6.19 (root@chema) (gcc versión 3.4.6) #7 SMP Sun Dec 31 20:08:05 CET 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f5650 Entering add_active_range(0, 0, 262128) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 262128 early_node_map[1] active PFN ranges 0: 0 -> 262128 On node 0 totalpages: 262128 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 255 pages used for memmap HighMem zone: 32497 pages, LIFO batch:7 DMI 2.3 present. Using APIC driver default ACPI: RSDP (v000 Nvidia ) @ 0x000f76c0 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff30c0 ACPI: SRAT (v001 AMD HAMMER 0x00000001 AMD 0x00000001) @ 0x3fff9500 ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff9600 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff9440 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:15 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) Detected 2010.314 MHz processor. Built 1 zonelists. Total pages: 260081 Kernel command line: auto BOOT_IMAGE=Slack ro root=301 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) spurious 8259A interrupt: IRQ7. Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1032120k/1048512k available (3342k kernel code, 15812k reserved, 1520k d ata, 280k init, 131008k highmem) virtual kernel memory layout: fixmap : 0xffe16000 - 0xfffff000 (1956 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0653000 - 0xc0699000 ( 280 kB) .data : 0xc0443b9f - 0xc05bfd8c (1520 kB) .text : 0xc0100000 - 0xc0443b9f (3342 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4023.11 BogoMIPS (lpj=8046224) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 0000000 0 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 20k freed ACPI: Core revision 20060707 tbxface-0107 [01] load_tables : ACPI Tables successfully acquired Parsing all Control Methods: Table [DSDT](id 0005) - 980 Objects with 86 Devices 310 Methods 37 Regions ACPI Namespace successfully loaded at root c06fbaf0 evxfevnt-0089 [02] enable : Transition to ACPI mode successful CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 02 Total of 1 processors activated (4023.11 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 Brought up 1 CPUs checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 371k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG PCI: No mmconfig possible on 0:18 Setting up standard PCI resources evgpeblk-0951 [04] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 evgpeblk-0951 [04] ev_create_gpe_block : GPE 20 to 5F [_GPE] 8 regs on int 0x9 evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 0 Runtime GPEs in this block evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 0 Runtime GPEs in this block Completing Region/Field/Buffer/Package initialization:.......................... ................................................................................ ........................................... Initialized 37/37 Regions 9/9 Fields 35/35 Buffers 68/77 Packages (989 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:... Executed 3 _INI methods requiring 1 _STA executions (examined 91 objects) ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Scanning bus 0000:00 PCI: Found 0000:00:00.0 [10de/005e] 000580 00 PCI: Calling quirk c0237f7e for 0000:00:00.0 PCI: Calling quirk c03b810e for 0000:00:00.0 PCI: Calling quirk c03b8423 for 0000:00:00.0 PCI: Found 0000:00:01.0 [10de/0050] 000601 00 PCI: Calling quirk c0237f7e for 0000:00:01.0 PCI: Calling quirk c03b810e for 0000:00:01.0 PCI: Calling quirk c03b8423 for 0000:00:01.0 PCI: Found 0000:00:01.1 [10de/0052] 000c05 00 PCI: Calling quirk c0237f7e for 0000:00:01.1 PCI: Calling quirk c03b810e for 0000:00:01.1 PCI: Calling quirk c03b8423 for 0000:00:01.1 PCI: Found 0000:00:02.0 [10de/005a] 000c03 00 PCI: Calling quirk c0237f7e for 0000:00:02.0 PCI: Calling quirk c03b810e for 0000:00:02.0 PCI: Calling quirk c03b8423 for 0000:00:02.0 PCI: Found 0000:00:02.1 [10de/005b] 000c03 00 PCI: Calling quirk c0237f7e for 0000:00:02.1 PCI: Calling quirk c03b810e for 0000:00:02.1 PCI: Calling quirk c03b8423 for 0000:00:02.1 PCI: Found 0000:00:04.0 [10de/0059] 000401 00 PCI: Calling quirk c0237f7e for 0000:00:04.0 PCI: Calling quirk c03b810e for 0000:00:04.0 PCI: Calling quirk c03b8423 for 0000:00:04.0 PCI: Found 0000:00:06.0 [10de/0053] 000101 00 PCI: Calling quirk c0237f7e for 0000:00:06.0 PCI: Calling quirk c03b810e for 0000:00:06.0 PCI: Calling quirk c03b8423 for 0000:00:06.0 PCI: Found 0000:00:07.0 [10de/0054] 000101 00 PCI: Calling quirk c0237f7e for 0000:00:07.0 PCI: Calling quirk c03b810e for 0000:00:07.0 PCI: Calling quirk c03b8423 for 0000:00:07.0 PCI: Found 0000:00:08.0 [10de/0055] 000101 00 PCI: Calling quirk c0237f7e for 0000:00:08.0 PCI: Calling quirk c03b810e for 0000:00:08.0 PCI: Calling quirk c03b8423 for 0000:00:08.0 PCI: Found 0000:00:09.0 [10de/005c] 000604 01 PCI: Calling quirk c0237f7e for 0000:00:09.0 PCI: Calling quirk c03b810e for 0000:00:09.0 PCI: Calling quirk c03b8423 for 0000:00:09.0 PCI: Found 0000:00:0a.0 [10de/0057] 000680 00 PCI: Calling quirk c0237f7e for 0000:00:0a.0 PCI: Calling quirk c03b810e for 0000:00:0a.0 PCI: Calling quirk c03b8423 for 0000:00:0a.0 PCI: Found 0000:00:0b.0 [10de/005d] 000604 01 PCI: Calling quirk c0237f7e for 0000:00:0b.0 PCI: Calling quirk c03b810e for 0000:00:0b.0 PCI: Calling quirk c03b8423 for 0000:00:0b.0 PCI: Found 0000:00:0c.0 [10de/005d] 000604 01 PCI: Calling quirk c0237f7e for 0000:00:0c.0 PCI: Calling quirk c03b810e for 0000:00:0c.0 PCI: Calling quirk c03b8423 for 0000:00:0c.0 PCI: Found 0000:00:0d.0 [10de/005d] 000604 01 PCI: Calling quirk c0237f7e for 0000:00:0d.0 PCI: Calling quirk c03b810e for 0000:00:0d.0 PCI: Calling quirk c03b8423 for 0000:00:0d.0 PCI: Found 0000:00:0e.0 [10de/005d] 000604 01 PCI: Calling quirk c0237f7e for 0000:00:0e.0 PCI: Calling quirk c03b810e for 0000:00:0e.0 PCI: Calling quirk c03b8423 for 0000:00:0e.0 PCI: Found 0000:00:18.0 [1022/1100] 000600 00 PCI: Calling quirk c0237f7e for 0000:00:18.0 PCI: Calling quirk c03b810e for 0000:00:18.0 PCI: Calling quirk c03b8423 for 0000:00:18.0 PCI: Found 0000:00:18.1 [1022/1101] 000600 00 PCI: Calling quirk c0237f7e for 0000:00:18.1 PCI: Calling quirk c03b810e for 0000:00:18.1 PCI: Calling quirk c03b8423 for 0000:00:18.1 PCI: Found 0000:00:18.2 [1022/1102] 000600 00 PCI: Calling quirk c0237f7e for 0000:00:18.2 PCI: Calling quirk c03b810e for 0000:00:18.2 PCI: Calling quirk c03b8423 for 0000:00:18.2 PCI: Found 0000:00:18.3 [1022/1103] 000600 00 PCI: Calling quirk c0237f7e for 0000:00:18.3 PCI: Calling quirk c03b810e for 0000:00:18.3 PCI: Calling quirk c03b8423 for 0000:00:18.3 PCI: Fixups for bus 0000:00 PCI: Scanning behind PCI bridge 0000:00:09.0, config 050500, pass 0 PCI: Scanning bus 0000:05 PCI: Found 0000:05:06.0 [1131/7133] 000480 00 PCI: Calling quirk c0237f7e for 0000:05:06.0 PCI: Calling quirk c03b810e for 0000:05:06.0 PCI: Calling quirk c03b8423 for 0000:05:06.0 PCI: Fixups for bus 0000:05 PCI: Transparent bridge - 0000:00:09.0 PCI: Bus scan for 0000:05 returning with max=05 PCI: Scanning behind PCI bridge 0000:00:0b.0, config 040400, pass 0 PCI: Scanning bus 0000:04 PCI: Fixups for bus 0000:04 PCI: Bus scan for 0000:04 returning with max=04 PCI: Scanning behind PCI bridge 0000:00:0c.0, config 030300, pass 0 PCI: Scanning bus 0000:03 PCI: Fixups for bus 0000:03 PCI: Bus scan for 0000:03 returning with max=03 PCI: Scanning behind PCI bridge 0000:00:0d.0, config 020200, pass 0 PCI: Scanning bus 0000:02 PCI: Fixups for bus 0000:02 PCI: Bus scan for 0000:02 returning with max=02 PCI: Scanning behind PCI bridge 0000:00:0e.0, config 010100, pass 0 PCI: Scanning bus 0000:01 PCI: Found 0000:01:00.0 [1002/5b60] 000300 00 PCI: Calling quirk c0237f7e for 0000:01:00.0 PCI: Calling quirk c03b810e for 0000:01:00.0 PCI: Calling quirk c03b8423 for 0000:01:00.0 Boot video device is 0000:01:00.0 PCI: Found 0000:01:00.1 [1002/5b70] 000380 00 PCI: Calling quirk c0237f7e for 0000:01:00.1 PCI: Calling quirk c03b810e for 0000:01:00.1 PCI: Calling quirk c03b8423 for 0000:01:00.1 PCI: Fixups for bus 0000:01 PCI: Bus scan for 0000:01 returning with max=01 PCI: Scanning behind PCI bridge 0000:00:09.0, config 050500, pass 1 PCI: Scanning behind PCI bridge 0000:00:0b.0, config 040400, pass 1 PCI: Scanning behind PCI bridge 0000:00:0c.0, config 030300, pass 1 PCI: Scanning behind PCI bridge 0000:00:0d.0, config 020200, pass 1 PCI: Scanning behind PCI bridge 0000:00:0e.0, config 010100, pass 1 PCI: Bus scan for 0000:00 returning with max=05 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices SCSI subsystem initialized libata version 2.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:01: ioport range 0x4000-0x407f could not be reserved pnp: 00:01: ioport range 0x4080-0x40ff has been reserved pnp: 00:01: ioport range 0x4400-0x447f has been reserved pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved pnp: 00:01: ioport range 0x4800-0x487f has been reserved pnp: 00:01: ioport range 0x4880-0x48ff has been reserved PCI: Bridge: 0000:00:09.0 IO window: disabled. MEM window: da000000-da0fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. got res [d8000000:d801ffff] bus [d8000000:d801ffff] flags 7202 for BAR 6 of 00 00:01:00.0 PCI: Bridge: 0000:00:0e.0 IO window: a000-afff MEM window: d8000000-d9ffffff PREFETCH window: d0000000-d7ffffff PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Machine check exception polling timer started. microcode: CPU0 not a capable Intel processor IA-32 Microcode Update Driver: v1.14a highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.27 [Flags: R/O]. io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered PCI: Calling quirk c0237e9c for 0000:00:00.0 PCI: Calling quirk c038faa7 for 0000:00:00.0 PCI: Calling quirk c0237e9c for 0000:00:01.0 PCI: Calling quirk c038faa7 for 0000:00:01.0 PCI: Calling quirk c0237e9c for 0000:00:01.1 PCI: Calling quirk c038faa7 for 0000:00:01.1 PCI: Calling quirk c0237e9c for 0000:00:02.0 PCI: Calling quirk c038faa7 for 0000:00:02.0 PCI: Calling quirk c0237e9c for 0000:00:02.1 PCI: Calling quirk c038faa7 for 0000:00:02.1 PCI: Calling quirk c0237e9c for 0000:00:04.0 PCI: Calling quirk c038faa7 for 0000:00:04.0 PCI: Calling quirk c0237e9c for 0000:00:06.0 PCI: Calling quirk c038faa7 for 0000:00:06.0 PCI: Calling quirk c0237e9c for 0000:00:07.0 PCI: Calling quirk c038faa7 for 0000:00:07.0 PCI: Calling quirk c0237e9c for 0000:00:08.0 PCI: Calling quirk c038faa7 for 0000:00:08.0 PCI: Calling quirk c0237e9c for 0000:00:09.0 PCI: Calling quirk c038faa7 for 0000:00:09.0 PCI: Calling quirk c0237e9c for 0000:00:0a.0 PCI: Calling quirk c038faa7 for 0000:00:0a.0 PCI: Calling quirk c0237e9c for 0000:00:0b.0 PCI: Calling quirk c023871c for 0000:00:0b.0 PCI: Linking AER extended capability on 0000:00:0b.0 PCI: Calling quirk c023889a for 0000:00:0b.0 PCI: Found HT MSI mapping on 0000:00:0b.0 with capability disabled PCI: Found HT MSI mapping on 0000:00:00.0 with capability enabled PCI: Calling quirk c038faa7 for 0000:00:0b.0 PCI: Calling quirk c0237e9c for 0000:00:0c.0 PCI: Calling quirk c023871c for 0000:00:0c.0 PCI: Linking AER extended capability on 0000:00:0c.0 PCI: Calling quirk c023889a for 0000:00:0c.0 PCI: Found HT MSI mapping on 0000:00:0c.0 with capability disabled PCI: Found HT MSI mapping on 0000:00:00.0 with capability enabled PCI: Calling quirk c038faa7 for 0000:00:0c.0 PCI: Calling quirk c0237e9c for 0000:00:0d.0 PCI: Calling quirk c023871c for 0000:00:0d.0 PCI: Linking AER extended capability on 0000:00:0d.0 PCI: Calling quirk c023889a for 0000:00:0d.0 PCI: Found HT MSI mapping on 0000:00:0d.0 with capability disabled PCI: Found HT MSI mapping on 0000:00:00.0 with capability enabled PCI: Calling quirk c038faa7 for 0000:00:0d.0 PCI: Calling quirk c0237e9c for 0000:00:0e.0 PCI: Calling quirk c023871c for 0000:00:0e.0 PCI: Linking AER extended capability on 0000:00:0e.0 PCI: Calling quirk c023889a for 0000:00:0e.0 PCI: Found HT MSI mapping on 0000:00:0e.0 with capability disabled PCI: Found HT MSI mapping on 0000:00:00.0 with capability enabled PCI: Calling quirk c038faa7 for 0000:00:0e.0 PCI: Calling quirk c0237e9c for 0000:00:18.0 PCI: Calling quirk c038faa7 for 0000:00:18.0 PCI: Calling quirk c0237e9c for 0000:00:18.1 PCI: Calling quirk c038faa7 for 0000:00:18.1 PCI: Calling quirk c0237e9c for 0000:00:18.2 PCI: Calling quirk c038faa7 for 0000:00:18.2 PCI: Calling quirk c0237e9c for 0000:00:18.3 PCI: Calling quirk c038faa7 for 0000:00:18.3 PCI: Calling quirk c0237e9c for 0000:05:06.0 PCI: Calling quirk c038faa7 for 0000:05:06.0 PCI: Calling quirk c0237e9c for 0000:01:00.0 PCI: Calling quirk c038faa7 for 0000:01:00.0 PCI: Calling quirk c0237e9c for 0000:01:00.1 PCI: Calling quirk c038faa7 for 0000:01:00.1 PCI: Setting latency timer of device 0000:00:0b.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] Allocate Port Service[0000:00:0b.0:pcie03] PCI: Setting latency timer of device 0000:00:0c.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] Allocate Port Service[0000:00:0c.0:pcie03] PCI: Setting latency timer of device 0000:00:0d.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] Allocate Port Service[0000:00:0d.0:pcie03] PCI: Setting latency timer of device 0000:00:0e.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] Allocate Port Service[0000:00:0e.0:pcie03] vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1536k, total 1638 4k vesafb: mode is 1024x768x8, linelength=1024, pages=20 vesafb: protected mode interface info at c000:59c8 vesafb: pmi: set display start = c00c5a5c, set palette = c00c5aa8 vesafb: pmi: ports = a010 a016 a054 a038 a03c a05c a000 a004 a0b0 a0b2 a0b4 vesafb: scrolling: redraw vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Fan [FAN] (on) ACPI: Getting cpuindex for acpiid 0x1 ACPI: Thermal Zone [THRM] (40 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 sec onds). Hangcheck: Using get_cycles(). Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 7.2.9-k4 Copyright (c) 1999-2006 Intel Corporation. e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:0a.0 to 64 forcedeth: using HIGHDMA eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0 netconsole: not configured, aborting Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 NFORCE-CK804: chipset revision 242 NFORCE-CK804: not 100% native mode: will probe irqs later NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: ST3200822A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: _NEC DVD_RW ND-4571A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 3ware Storage Controller device driver for Linux v1.26.02.001. sata_nv 0000:00:07.0: version 2.0 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 22 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:07.0 to 64 ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 17 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 17 scsi0 : sata_nv ata1: SATA link down (SStatus 0 SControl 300) scsi1 : sata_nv ata2: SATA link down (SStatus 0 SControl 300) ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 21 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:08.0 to 64 ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC400 irq 18 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC408 irq 18 scsi2 : sata_nv ata3: SATA link down (SStatus 0 SControl 300) scsi3 : sata_nv ata4: SATA link down (SStatus 0 SControl 300) Fusion MPT base driver 3.04.02 Copyright (c) 1999-2005 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.02 ieee1394: raw1394: /dev/raw1394 device initialized usbmon: debugfs is not available ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 19, io mem 0xfeb00000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 16, io mem 0xda104000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected USB Universal Host Controller Interface driver v3.0 usb 2-1: new low speed USB device using ohci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice usb 2-2: new low speed USB device using ohci_hcd and address 3 usb 2-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. input: Genius Wireless Optical Pro as /class/input/input0 input: USB HID v1.00 Mouse [Genius Wireless Optical Pro] on usb-0000:00:02.0-1 input: USB-compliant keyboard as /class/input/input1 input: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:02.0-2 input: USB-compliant keyboard as /class/input/input2 input: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-0000:00:02.0-2 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com oprofile: using NMI interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (version 2.00. 00) powernow-k8: BIOS error - no PSB or ACPI _PSS objects acpi_processor-0740 [00] processor_preregister_: Error while parsing _PSD domain information. Assuming no coordination Using IPI Shortcut mode Time: tsc clocksource has been installed. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). JFS: nTxBlock = 8068, nTxLock = 64544 UDF-fs: No VRS found VFS: Mounted root (jfs filesystem) readonly. Trying to move old root to /initrd ... okay Freeing unused kernel memory: 280k freed Adding 538168k swap on /dev/hda3. Priority:-1 extents:1 across:538168k parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40 Linux video capture interface: v2.00 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:04.0 to 64 saa7130/34: v4l2 driver version 0.2.14 loaded intel8x0_measure_ac97_clock: measured 54650 usecs intel8x0: clocking to 46983 ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 ACPI: PCI Interrupt 0000:05:06.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 20 saa7133[0]: found at 0000:05:06.0, rev: 208, irq: 20, latency: 32, mmio: 0xda000 000 saa7133[0]: subsystem: 4e42:3306, board: UNKNOWN/GENERIC [card=0,autodetected] saa7133[0]: board init: gpio is 210000 saa7133[0]: i2c eeprom 00: 42 4e 06 33 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 saa7133[0]: i2c eeprom 10: 00 00 62 08 ff 20 ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 ed ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 05 01 01 16 32 15 ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 eth0: no IPv6 routers present Linux video capture interface: v2.00 saa7130/34: v4l2 driver version 0.2.14 loaded saa7133[0]: found at 0000:05:06.0, rev: 208, irq: 20, latency: 32, mmio: 0xda000 000 saa7133[0]: subsystem: 4e42:3306, board: Philips Tiger reference design [card=81 ,insmod option] saa7133[0]: board init: gpio is 210000 saa7133[0]: i2c eeprom 00: 42 4e 06 33 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 saa7133[0]: i2c eeprom 10: 00 00 62 08 ff 20 ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 ed ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 05 01 01 16 32 15 ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff tuner 2-004b: chip found @ 0x96 (saa7133[0]) tuner 2-004b: setting tuner address to 61 tuner 2-004b: type set to tda8290+75a tuner 2-004b: setting tuner address to 61 tuner 2-004b: type set to tda8290+75a saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 saa7133[0]: registered device radio0 DVB: registering new adapter (saa7133[0]). DVB: registering frontend 0 (Philips TDA10046H DVB-T)... tda1004x: setting up plls for 48MHz sampling clock tda1004x: timeout waiting for DSP ready tda1004x: found firmware revision 0 -- invalid tda1004x: booting from eeprom tda1004x: timeout waiting for DSP ready tda1004x: found firmware revision 0 -- invalid tda1004x: firmware upload failed Linux video capture interface: v2.00 saa7130/34: v4l2 driver version 0.2.14 loaded saa7133[0]: found at 0000:05:06.0, rev: 208, irq: 20, latency: 32, mmio: 0xda000 000 saa7133[0]: subsystem: 4e42:3306, board: LifeView FlyDVB-T / Genius VideoWonder DVB-T [card=86,insmod option] saa7133[0]: board init: gpio is 10000 input: saa7134 IR (LifeView FlyDVB-T / as /class/input/input3 tuner 2-004b: chip found @ 0x96 (saa7133[0]) saa7133[0]: i2c eeprom 00: 42 4e 06 33 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 saa7133[0]: i2c eeprom 10: 00 00 62 08 ff 20 ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 ed ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 05 01 01 16 32 15 ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff tuner 2-004b: tuner type not set tuner 2-004b: tuner type not set saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 tuner 2-004b: tuner type not set tuner 2-004b: tuner type not set tuner 2-004b: tuner type not set tuner 2-004b: tuner type not set tuner 2-004b: tuner type not set tuner 2-004b: tuner type not set tuner 2-004b: tuner type not set tuner 2-004b: tuner type not set tuner 2-004b: tuner type not set tuner 2-004b: tuner type not set tuner 2-004b: tuner type not set tuner 2-004b: tuner type not set tuner 2-004b: tuner type not set Linux video capture interface: v2.00 saa7130/34: v4l2 driver version 0.2.14 loaded saa7133[0]: found at 0000:05:06.0, rev: 208, irq: 20, latency: 32, mmio: 0xda000 000 saa7133[0]: subsystem: 4e42:3306, board: Tevion/KWorld DVB-T 220RF [card=88,insm od option] saa7133[0]: board init: gpio is 10000 tuner 2-004b: chip found @ 0x96 (saa7133[0]) tuner 2-004b: setting tuner address to 61 tuner 2-004b: type set to tda8290+75a tuner 2-004b: setting tuner address to 61 tuner 2-004b: type set to tda8290+75a saa7133[0]: i2c eeprom 00: 42 4e 06 33 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 saa7133[0]: i2c eeprom 10: 00 00 62 08 ff 20 ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 ed ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 05 01 01 16 32 15 ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 saa7133[0]: registered device radio0 Linux video capture interface: v2.00 saa7130/34: v4l2 driver version 0.2.14 loaded saa7133[0]: found at 0000:05:06.0, rev: 208, irq: 20, latency: 32, mmio: 0xda000 000 saa7133[0]: subsystem: 4e42:3306, board: Philips Tiger reference design [card=81 ,insmod option] saa7133[0]: board init: gpio is 10000 tuner 2-004b: chip found @ 0x96 (saa7133[0]) tuner 2-004b: setting tuner address to 61 tuner 2-004b: type set to tda8290+75a tuner 2-004b: setting tuner address to 61 tuner 2-004b: type set to tda8290+75a saa7133[0]: i2c eeprom 00: 42 4e 06 33 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 saa7133[0]: i2c eeprom 10: 00 00 62 08 ff 20 ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 ed ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 05 01 01 16 32 15 ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 saa7133[0]: registered device radio0 DVB: registering new adapter (saa7133[0]). DVB: registering frontend 0 (Philips TDA10046H DVB-T)... tda1004x: setting up plls for 48MHz sampling clock tda1004x: found firmware revision 0 -- invalid tda1004x: booting from eeprom tda1004x: found firmware revision ff -- invalid tda1004x: firmware upload failed