%% Generated by KWord. Don't modify this file but the file *.kwd. %% Send an email to rjacolin@ifrance.com for bugs, wishes, .... Thank you. %% Compile this file with : lambda filename.tex %% a dvi file will be generated. %% Use odvips to convert it and to see it with gv %% The file uses the latex style (not the kword style). \ocp\TexUTF=inutf8 \InputTranslation currentfile \TexUTF \documentclass[a4paper, 12pt]{article} % Package(s) to include \usepackage{omega} \usepackage[a4paper]{geometry} \usepackage{textcomp} %%%%%%%%%%%%%%%%%% END OF PREAMBLE %%%%%%%%%%%%%%%%%% \pagestyle{empty} \begin{document} \begin{flushleft} oot@darkstar:~# lsusb Bus 004 Device 002: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 002: ID 055d:b230 Samsung Electro-Mechanics Co. Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 root@darkstar:~# root@darkstar:~# lspci 00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 03) 00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 82) 00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 02) 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02) 01:09.0 Ethernet controller: Accton Technology Corporation SMC2-1211TX (rev 10) 01:0a.0 Communication controller: Agere Systems LT WinModem (rev 02) 01:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) root@darkstar:~# dmesg Linux version 2.6.14 (root@darkstar) (gcc version 3.3.6) #1 Sun Nov 20 04:20:29 CST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001f7f0000 (usable) BIOS-e820: 000000001f7f0000 - 000000001f7f3000 (ACPI NVS) BIOS-e820: 000000001f7f3000 - 000000001f800000 (ACPI data) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 503MB LOWMEM available. On node 0 totalpages: 129008 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 124912 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 DMI 2.4 present. Allocating PCI resources starting at 20000000 (gap: 1f800000:df400000) Built 1 zonelists Kernel command line: BOOT_IMAGE=Slack_2.6.14 ro root=342 Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 2700.371 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 507492k/516032k available (2498k kernel code, 8052k reserved, 727k data, 164k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5407.96 BogoMIPS (lpj=10815939) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 128K CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 mtrr: v2.0 (20020519) CPU: Intel(R) Celeron(R) CPU 2.70GHz stepping 09 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfbc60, last bus=1 PCI: Using configuration type 1 Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 PCI: Using IRQ router PIIX/ICH [8086/24c0] at 0000:00:1f.0 PCI: IRQ 0 for device 0000:00:1d.0 doesn't match PIRQ mask - try pci=usepirqmask PCI: Found IRQ 5 for device 0000:00:1d.0 PCI: Sharing IRQ 5 with 0000:00:02.0 PCI: IRQ 0 for device 0000:00:1d.1 doesn't match PIRQ mask - try pci=usepirqmask PCI: Found IRQ 10 for device 0000:00:1d.1 PCI: IRQ 0 for device 0000:00:1d.2 doesn't match PIRQ mask - try pci=usepirqmask PCI: Found IRQ 11 for device 0000:00:1d.2 PCI: Sharing IRQ 11 with 0000:00:1f.1 PCI: IRQ 0 for device 0000:00:1d.7 doesn't match PIRQ mask - try pci=usepirqmask PCI: Found IRQ 10 for device 0000:00:1d.7 PCI: Sharing IRQ 10 with 0000:01:0c.0 PCI: IRQ 0 for device 0000:00:1f.3 doesn't match PIRQ mask - try pci=usepirqmask PCI: Found IRQ 3 for device 0000:00:1f.3 PCI: Sharing IRQ 3 with 0000:00:1f.5 PCI: IRQ 0 for device 0000:01:0a.0 doesn't match PIRQ mask - try pci=usepirqmask PCI: Found IRQ 9 for device 0000:01:0a.0 PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1e.0 IO window: c000-cfff MEM window: ec000000-edffffff PREFETCH window: 20000000-200fffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 845G Chipset. agpgart: Detected 8060K stolen memory. agpgart: AGP aperture is 128M @ 0xe0000000 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A io scheduler noop registered Floppy drive(s): fd0 is 360K PC floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Found IRQ 11 for device 0000:00:1f.1 PCI: Sharing IRQ 11 with 0000:00:1d.2 ICH4: chipset revision 2 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:DMA Probing IDE interface ide0... hda: WDC WD800BB-60JKC0, ATA DISK drive hdb: ST340015A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdd: SONY CD-RW CRX215E5, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hdb: max request size: 128KiB hdb: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hdb: cache flushes supported hdb: hdb1 < hdb5 > hdb2 hdd: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide mice: PS/2 mouse device common for all mice input: PC Speaker md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 3500.000 MB/sec raid5: using function: pIII_sse (3500.000 MB/sec) md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 3.39 padlock: VIA PadLock not detected. NET: Registered protocol family 2 input: AT Translated Set 2 keyboard on isa0060/serio0 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 4, 65536 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 ieee80211_crypt: registered algorithm 'NULL' Using IPI Shortcut mode md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 164k freed Adding 1950408k swap on /dev/hdb5. Priority:-1 extents:1 across:1950408k EXT3 FS on hdb2, internal journal NTFS driver 2.1.24 [Flags: R/O MODULE]. NTFS volume version 3.1. 8139too Fast Ethernet driver 0.9.27 PCI: Found IRQ 11 for device 0000:01:09.0 eth0: RealTek RTL8139 at 0xe01fa000, 00:10:b5:64:12:47, IRQ 11 eth0: Identified 8139 chip type 'RTL-8139B' PCI: Found IRQ 10 for device 0000:01:0c.0 PCI: Sharing IRQ 10 with 0000:00:1d.7 eth1: RealTek RTL8139 at 0xe01fc000, 00:0c:76:dd:aa:4a, IRQ 10 eth1: Identified 8139 chip type 'RTL-8101' PCI: Found IRQ 3 for device 0000:00:1f.5 PCI: Sharing IRQ 3 with 0000:00:1f.3 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 53661 usecs intel8x0: clocking to 48000 i8xx TCO timer: initialized (0x0460). heartbeat=30 sec (nowayout=0) hw_random: RNG not detected pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Found IRQ 10 for device 0000:00:1d.7 PCI: Sharing IRQ 10 with 0000:01:0c.0 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: irq 10, io mem 0xee080000 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected USB Universal Host Controller Interface driver v2.3 PCI: Found IRQ 5 for device 0000:00:1d.0 PCI: Sharing IRQ 5 with 0000:00:02.0 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 5, io base 0x0000d800 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PCI: Found IRQ 10 for device 0000:00:1d.1 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 10, io base 0x0000d000 usb 2-1: new full speed USB device using uhci_hcd and address 2 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PCI: Found IRQ 11 for device 0000:00:1d.2 PCI: Sharing IRQ 11 with 0000:00:1f.1 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000d400 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 4-1: new low speed USB device using uhci_hcd and address 2 usbcore: registered new driver hiddev input: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on usb-0000:00:1d.2-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver usbcore: registered new driver usbmouse drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver i810_smbus 0000:00:02.0: i810/i815 i2c device found. hw_random: RNG not detected hw_random: RNG not detected hw_random: RNG not detected hw_random: RNG not detected hw_random: RNG not detected hw_random: RNG not detected hw_random: RNG not detected hw_random: RNG not detected hw_random: RNG not detected hw_random: RNG not detected hw_random: RNG not detected hw_random: RNG not detected hw_random: RNG not detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) root@darkstar:~# \end{flushleft} \end{document}