smartctl version 5.36 [i386-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF READ SMART DATA SECTION ===
Warning: device does not support Error Logging
SMART Error Log Version: 1
Warning: ATA error count 3247 inconsistent with error log pointer 5

ATA Error Count: 3247 (device log contains only the most recent five errors)
 CR = Command Register [HEX]
 FR = Features Register [HEX]
 SC = Sector Count Register [HEX]
 SN = Sector Number Register [HEX]
 CL = Cylinder Low Register [HEX]
 CH = Cylinder High Register [HEX]
 DH = Device/Head Register [HEX]
 DC = Device Command Register [HEX]
 ER = Error register [HEX]
 ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 3247 occurred at disk power-on lifetime: 2522 hours (105 days + 2 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 51 00 0b 4f c2 e0  Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  b0 da 00 01 4f c2 e0 08   7d+22:55:49.280  SMART RETURN STATUS
  ec 00 00 b9 ca 20 e0 08   7d+22:55:49.264  IDENTIFY DEVICE
  ca 00 08 b2 ca 20 e0 08   7d+22:55:42.240  WRITE DMA
  ca 00 08 aa ca 20 e0 08   7d+22:56:44.384  WRITE DMA
  ca 00 08 a2 ca 20 e0 08   7d+22:56:40.992  WRITE DMA

Error 3246 occurred at disk power-on lifetime: 2522 hours (105 days + 2 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 50 00 3a 93 af e0   at LBA = 0x00af933a = 11506490

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 a8 3a 93 af e0 08   7d+22:43:19.056  READ DMA
  c8 00 18 1a 93 af e0 08   7d+22:43:19.056  READ DMA
  c8 00 90 e2 93 af e0 08   7d+22:43:19.056  READ DMA
  c8 00 08 32 93 af e0 08   7d+22:43:19.056  READ DMA
  c8 00 40 d2 92 af e0 08   7d+22:43:19.040  READ DMA

Error 3245 occurred at disk power-on lifetime: 2522 hours (105 days + 2 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 50 00 22 cc 2a e0   at LBA = 0x002acc22 = 2804770

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 00 23 cc 2a e0 08   7d+22:40:40.656  READ DMA
  c8 00 c8 d2 cd 2a e0 08   7d+22:40:40.640  READ DMA
  c8 00 70 52 be e2 e0 08   7d+22:40:40.640  READ DMA
  c8 00 00 53 bd e2 e0 08   7d+22:40:40.624  READ DMA
  c8 00 00 53 bc e2 e0 08   7d+22:40:40.624  READ DMA

Error 3244 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 51 05 01 aa 00 a0  Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  a1 00 05 01 aa 00 a0 00      00:00:19.888  IDENTIFY PACKET DEVICE

Error 3243 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 51 05 01 aa 00 a0  Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  a1 00 05 01 aa 00 a0 00      00:00:19.904  IDENTIFY PACKET DEVICE