Inspecting /boot/System.map-2.6.18.2-34-default Loaded 23374 symbols from /boot/System.map-2.6.18.2-34-default. Symbols match kernel version 2.6.18. No module symbols loaded - kernel modules not enabled. klogd 1.4.1, log source = ksyslog started. <5>Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000002fffc000 (usable) <4> BIOS-e820: 000000002fffc000 - 000000002ffff000 (ACPI data) <4> BIOS-e820: 000000002ffff000 - 0000000030000000 (ACPI NVS) <4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) <4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) <4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) <5>0MB HIGHMEM available. <5>767MB LOWMEM available. <7>On node 0 totalpages: 196604 <7> DMA zone: 4096 pages, LIFO batch:0 <7> Normal zone: 192508 pages, LIFO batch:31 <6>DMI 2.3 present. <6>Using APIC driver default <6>IO/L-APIC allowed because system is MP or new enough <7>ACPI: RSDP (v000 ASUS ) @ 0x000f5700 <7>ACPI: RSDT (v001 ASUS P4S800MX 0x42302e31 MSFT 0x31313031) @ 0x2fffc000 <7>ACPI: FADT (v001 ASUS P4S800MX 0x42302e31 MSFT 0x31313031) @ 0x2fffc0c0 <7>ACPI: BOOT (v001 ASUS P4S800MX 0x42302e31 MSFT 0x31313031) @ 0x2fffc030 <7>ACPI: MADT (v001 ASUS P4S800MX 0x42302e31 MSFT 0x31313031) @ 0x2fffc058 <7>ACPI: DSDT (v001 ASUS P4S800MX 0x00001000 MSFT 0x0100000b) @ 0x00000000 <6>ACPI: PM-Timer IO Port: 0xe408 <7>ACPI: Local APIC address 0xfee00000 <6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) <4>Processor #0 15:2 APIC version 20 <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) <4>Processor #1 15:2 APIC version 20 <6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) <6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) <6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) <4>IOAPIC[0]: apic_id 2, version 128, address 0xfec00000, GSI 0-23 <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level) <7>ACPI: IRQ0 used by override. <7>ACPI: IRQ2 used by override. <4>Enabling APIC mode: Flat. Using 1 I/O APICs <6>Using ACPI (MADT) for SMP configuration information <4>Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000) <4>Detected 3000.955 MHz processor. <4>Built 1 zonelists. Total pages: 196604 <5>Kernel command line: root=/dev/hda2 vga=0x317 resume=/dev/hda5 splash=silent <6>bootsplash: silent mode. <7>mapped APIC to ffffd000 (fee00000) <7>mapped IOAPIC to ffffc000 (fec00000) <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Initializing CPU#0 <4>PID hash table entries: 4096 (order: 12, 16384 bytes) <4>Console: colour dummy device 80x25 <4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>Memory: 772264k/786416k available (1697k kernel code, 13452k reserved, 968k data, 196k init, 0k highmem) <4>Checking if this processor honours the WP bit even in supervisor mode... Ok. <4>Calibrating delay using timer specific routine.. 6005.59 BogoMIPS (lpj=12011185) <6>Security Framework v1.0.0 initialized <4>Mount-cache hash table entries: 512 <7>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 <7>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: Physical Processor ID: 0 <7>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <6>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available <6>CPU0: Thermal monitoring enabled <4>Compat vDSO mapped to ffffe000. <6>Checking 'hlt' instruction... OK. <6>SMP alternatives: switching to UP code <6>checking if image is initramfs... it is <6>Freeing initrd memory: 3146k freed <6>ACPI: Core revision 20060707 <4>CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09 <6>SMP alternatives: switching to SMP code <4>Booting processor 1/1 eip 3000 <6>Initializing CPU#1 <4>Calibrating delay using timer specific routine.. 6002.11 BogoMIPS (lpj=12004237) <7>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 <7>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: Physical Processor ID: 0 <7>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#1. <6>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available <6>CPU1: Thermal monitoring enabled <4>CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09 <6>Total of 2 processors activated (12007.71 BogoMIPS). <4>ENABLING IO-APIC IRQs <6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 <6>checking TSC synchronization across 2 CPUs: passed. <6>Brought up 2 CPUs <4>migration_cost=168 <6>NET: Registered protocol family 16 <6>ACPI: bus type pci registered <6>PCI: PCI BIOS revision 2.10 entry at 0xf10c0, last bus=1 <6>PCI: Using configuration type 1 <4>Setting up standard PCI resources <6>ACPI: Interpreter enabled <6>ACPI: Using IOAPIC for interrupt routing <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *9 <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *9 <4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. <4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9 <6>ACPI: PCI Root Bridge [PCI0] (0000:00) <7>PCI: Probing PCI hardware (bus 00) <6>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 <6>Enabling SiS 96x SMBus. <6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5 <7>Boot video device is 0000:01:00.0 <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] <6>Linux Plug and Play Support v0.97 (c) Adam Belay <6>pnp: PnP ACPI init <6>pnp: PnP ACPI: found 15 devices <6>PnPBIOS: Disabled by ACPI PNP <6>PCI: Using ACPI for IRQ routing <6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report <6>pnp: 00:02: ioport range 0xe400-0xe47f could not be reserved <6>pnp: 00:02: ioport range 0xe480-0xe4ff has been reserved <6>pnp: 00:02: ioport range 0xe600-0xe61f has been reserved <6>pnp: 00:02: ioport range 0x480-0x48f has been reserved <6>pnp: 00:0e: ioport range 0x295-0x296 has been reserved <6>PCI: Bridge: 0000:00:01.0 <6> IO window: disabled. <6> MEM window: d7000000-d7ffffff <6> PREFETCH window: dff00000-febfffff <7>PCI: Setting latency timer of device 0000:00:01.0 to 64 <6>NET: Registered protocol family 2 <4>IP route cache hash table entries: 32768 (order: 5, 131072 bytes) <4>TCP established hash table entries: 131072 (order: 8, 1048576 bytes) <4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes) <6>TCP: Hash tables configured (established 131072 bind 65536) <6>TCP reno registered <6>Simple Boot Flag at 0x3a set to 0x1 <6>Machine check exception polling timer started. <6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) <5>apm: disabled - APM is not SMP safe. <6>audit: initializing netlink socket (disabled) <5>audit(1170294403.824:1): initialized <4>Total HugeTLB memory allocated, 0 <5>VFS: Disk quotas dquot_6.5.1 <4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>Initializing Cryptographic API <6>io scheduler noop registered <6>io scheduler anticipatory registered <6>io scheduler deadline registered <6>io scheduler cfq registered (default) <6>vesafb: framebuffer at 0xe0000000, mapped to 0xf0880000, using 6144k, total 262144k <6>vesafb: mode is 1024x768x16, linelength=2048, pages=1 <6>vesafb: protected mode interface info at c000:e2e0 <6>vesafb: pmi: set display start = c00ce316, set palette = c00ce380 <6>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da <6>vesafb: scrolling: redraw <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 <6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 81749 bytes,<6>...found (1024x768, 46202 bytes, v3). <4>Console: switching to colour frame buffer device 124x44 <6>fb0: VESA VGA frame buffer device <6>isapnp: Scanning for PnP cards... <6>isapnp: No Plug & Play device found <6>Real Time Clock Driver v1.12ac <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled <6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>PNP: PS/2 controller doesn't have AUX irq; using default 12 <6>serio: i8042 AUX port at 0x60,0x64 irq 12 <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>mice: PS/2 mouse device common for all mice <6>input: PC Speaker as /class/input/input0 <6>input: AT Translated Set 2 keyboard as /class/input/input1 <6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: bitmap version 4.39 <6>NET: Registered protocol family 1 <4>Using IPI No-Shortcut mode <6>ACPI: (supports S0 S1 S4 S5) <6>Time: tsc clocksource has been installed. <6>Freeing unused kernel memory: 196k freed <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <3>ACPI: Invalid PBLK length [5] <6>SIS5513: IDE controller at PCI slot 0000:00:02.5 <6>ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 177 <6>SIS5513: chipset revision 0 <6>SIS5513: not 100% native mode: will probe irqs later <6>SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller <6> ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:DMA <6> ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA, hdd:DMA <7>Probing IDE interface ide0... <4>hda: ST3120023A, ATA DISK drive <4>hdb: ASUS DVD-E616A2, ATAPI CD/DVD-ROM drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <6>hda: max request size: 128KiB <6>hda: 234375000 sectors (120000 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) <6>hda: cache flushes supported <6> hda: hda1 hda2 hda3 < hda5 > hda4 <7>Probing IDE interface ide1... <4>hdc: ASUS CRW-5232A3, ATAPI CD/DVD-ROM drive <4>hdd: BENQ DVD DD DW1640, ATAPI CD/DVD-ROM drive <4>ide1 at 0x170-0x177,0x376 on irq 15 <6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found <4>Attempting manual resume <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hda2, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>parport: PnPBIOS parport detected. <6>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] <6>lp0: using parport0 (interrupt-driven). <6>Linux agpgart interface v0.101 (c) Dave Jones <6>usbcore: registered new driver usbfs <6>usbcore: registered new driver hub <6>agpgart: Detected SiS 661 chipset <6>agpgart: AGP aperture is 64M @ 0xd8000000 <6>sis900.c: v1.08.10 Apr. 2 2006 <6>ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 185 <6>0000:00:04.0: VIA 6103 PHY transceiver found at address 1. <6>0000:00:04.0: Using transceiver found at address 1 as default <7>ieee1394: Initialized config rom entry `ip1394' <6>eth0: SiS 900 PCI Fast Ethernet at 0x9800, IRQ 185, 00:0e:a6:2a:38:7d. <6>Linux video capture interface: v2.00 <7>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) <6>ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 169 <6>ohci_hcd 0000:00:03.0: OHCI Host Controller <6>ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 <6>ohci_hcd 0000:00:03.0: irq 169, io mem 0xd6800000 <6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5 <6>usb usb1: new device found, idVendor=0000, idProduct=0000 <6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb1: Product: OHCI Host Controller <6>usb usb1: Manufacturer: Linux 2.6.18.2-34-default ohci_hcd <6>usb usb1: SerialNumber: 0000:00:03.0 <6>usb usb1: configuration #1 chosen from 1 choice <6>hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 3 ports detected <6>gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x200, speed 840kHz <6>ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 193 <6>ohci_hcd 0000:00:03.1: OHCI Host Controller <6>ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 <6>ohci_hcd 0000:00:03.1: irq 193, io mem 0xd6000000 <6>usb usb2: new device found, idVendor=0000, idProduct=0000 <6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb2: Product: OHCI Host Controller <6>usb usb2: Manufacturer: Linux 2.6.18.2-34-default ohci_hcd <6>usb usb2: SerialNumber: 0000:00:03.1 <6>usb usb2: configuration #1 chosen from 1 choice <6>hub 2-0:1.0: USB hub found <6>hub 2-0:1.0: 3 ports detected <6>sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0xe600 <6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 <6>ACPI: PCI Interrupt 0000:00:09.2[B] -> GSI 18 (level, low) -> IRQ 201 <6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[201] MMIO=[d4000000-d40007ff] Max Packet=[2048] IR/IT contexts=[4/8] <6>ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 209 <6>ehci_hcd 0000:00:03.3: EHCI Host Controller <6>ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 3 <6>gameport: EMU10K1 is pci0000:00:09.1/gameport0, io 0x9000, speed 1217kHz <7>PCI: cache line size of 128 is not supported by device 0000:00:03.3 <6>ehci_hcd 0000:00:03.3: irq 209, io mem 0xd5800000 <6>ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 <6>usb usb3: new device found, idVendor=0000, idProduct=0000 <6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb3: Product: EHCI Host Controller <6>usb usb3: Manufacturer: Linux 2.6.18.2-34-default ehci_hcd <6>usb usb3: SerialNumber: 0000:00:03.3 <6>usb usb3: configuration #1 chosen from 1 choice <6>hub 3-0:1.0: USB hub found <6>hub 3-0:1.0: 6 ports detected <6>hdb: ATAPI 48X DVD-ROM drive, 2048kB Cache, UDMA(100) <6>Uniform CD-ROM driver Revision: 3.20 <6>hdc: ATAPI 52X CD-ROM CD-R/RW drive, 1536kB Cache, UDMA(33) <6>hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) <6>ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 217 <6>ALSA sound/pci/emu10k1/emufx.c:1435: Installing spdif_bug patch: Audigy 2 ZS [SB0350] <6>ohci_hcd 0000:00:03.1: wakeup <6>bttv: driver version 0.9.16 loaded <6>bttv: using 8 buffers with 2080k (520 pages) each for capture <6>bttv: Bt8xx card found (0). <6>ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 201 <6>bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 201, latency: 32, mmio: 0xdf000000 <6>bttv0: detected: Prolink Pixelview PV-BT [card=72], PCI subsystem ID is 1554:4011 <6>bttv0: using: Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM) [card=72,autodetected] <7>bttv0: gpio: en=00000000, out=00000000 in=006fc0ff [init] <7>i2c-algo-bit.o: (0) scl=1, sda=1 <7>i2c-algo-bit.o: (1) scl=1, sda=0 <7>i2c-algo-bit.o: (2) scl=1, sda=1 <7>i2c-algo-bit.o: (3) scl=0, sda=1 <7>i2c-algo-bit.o: (4) scl=1, sda=1 <6>i2c-algo-bit.o: bt878 #0 [sw] passed test. <4>bttv0: using tuner=5 <6>bttv0: i2c: checking for TDA7432 @ 0x8a... not found <4>nvidia: module license 'NVIDIA' taints kernel. <6>usb 2-2: new low speed USB device using ohci_hcd and address 2 <6>bttv0: i2c: checking for TDA9887 @ 0x86... not found <6>tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw]) <6>tuner 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) <6>tuner 1-0063: chip found @ 0xc6 (bt878 #0 [sw]) <6>bttv0: registered device video0 <6>bttv0: registered device vbi0 <6>bttv0: registered device radio0 <6>bttv0: PLL: 28636363 => 35468950 .. ok <6>input: bttv IR (card=72) as /class/input/input2 <4>bttv-input: bttv IR (card=72) detected at pci-0000:00:0a.0/ir0 <6>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 177 <4>NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9631 Thu Nov 9 17:38:10 PST 2006 <6>usb 2-2: new device found, idVendor=045e, idProduct=00b8 <6>usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0 <6>usb 2-2: Product: Microsoft Optical Mouse by Starck <6>usb 2-2: Manufacturer: Microsoft <6>bt878: AUDIO driver version 0.0.0 loaded <6>usb 2-2: configuration #1 chosen from 1 choice <6>bt878: Bt878 AUDIO function found (0). <6>ACPI: PCI Interrupt 0000:00:0a.1[A] -> GSI 18 (level, low) -> IRQ 201 <4>bt878_probe: card id=[0x40111554], Unknown card. <4>Exiting.. <6>ACPI: PCI interrupt for device 0000:00:0a.1 disabled <4>bt878: probe of 0000:00:0a.1 failed with error -22 <6>usbcore: registered new driver hiddev <6>input: Microsoft Microsoft Optical Mouse by Starck as /class/input/input3 <6>input: USB HID v1.10 Mouse [Microsoft Microsoft Optical Mouse by Starck] on usb-0000:00:03.1-2 <6>usbcore: registered new driver usbhid <6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver <7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0151117924] <6>Adding 2273156k swap on /dev/hda5. Priority:-1 extents:1 across:2273156k <6>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com <6>loop: loaded (max 8 devices) <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hda4, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>NTFS driver 2.1.27 [Flags: R/W MODULE]. <6>NTFS volume version 3.1. <3>NTFS-fs warning (device hda1): load_system_files(): Unsupported volume flags 0x4000 encountered. <3>NTFS-fs warning (device hda1): load_system_files(): Volume has unsupported flags set. Will not be able to remount read-write. Run chkdsk and mount in Windows. <6>AppArmor: AppArmor initialized <5>audit(1170294417.068:2): AppArmor initialized <4> Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Thu Feb 1 01:46:44 2007 Trying manual resume from /dev/hda5 Creating device nodes with udev Loading ide-core Loading ide-disk Loading processor Loading thermal Loading sis5513 Loading fan Loading edd Loading jbd Loading mbcache Loading ext3 Invoking userspace resume from /dev/hda5 resume: Could not stat configuration file resume: libgcrypt version: 1.2.3 resume: Could not read the image Invoking in-kernel resume from /dev/hda5 Waiting for device /dev/hda2 to appear: ok fsck 1.39 (29-May-2006) [/bin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/hda2 /dev/hda2: Superblock last write time is in the future. FIXED. /dev/hda2: clean, 149150/2626560 files, 1012776/5242880 blocks fsck succeeded. Mounting root device read-write. Mounting root /dev/hda2 Boot logging started on /dev/tty1(/dev/console (deleted)) at Wed Jan 31 22:46:49 2007 boot.udev start Starting udevd done 'boot.udev start' exits with status 0 boot.rootfsck start Activating swap-devices in /etc/fstab... done'boot.rootfsck start' exits with status 0 boot.loadmodules start Loading required kernel modules done'boot.loadmodules start' exits with status 0 boot.preload_early start done 'boot.preload_early start' exits with status 0 boot.scpm start 'boot.scpm start' exits with status 0 boot.device-mapper start Activating device mapper... done 'boot.device-mapper start' exits with status 0 boot.md start Starting MD Raid done 'boot.md start' exits with status 0 boot.lvm start Waiting for udev to settle... Scanning for LVM volume groups... Reading all physical volumes. This may take a while... No volume groups found No volume groups found Activating LVM volume groups... No volume groups found done 'boot.lvm start' exits with status 0 boot.localfs start Checking file systems... fsck 1.39 (29-May-2006) /dev/hda4: Superblock last write time is in the future. FIXED. /dev/hda4: clean, 1089/4447744 files, 338031/8893985 blocks donedone Mounting local file systems... proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) debugfs on /sys/kernel/debug type debugfs (rw) udev on /dev type tmpfs (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/hda4 on /home type ext3 (rw,acl,user_xattr) /dev/hda1 on /windows/C type ntfs (ro,noexec,nosuid,nodev,gid=100,umask=0002,nls=utf8) done'boot.localfs start' exits with status 0 boot.apparmor start Loading AppArmor module done Mounting securityfs on /sys/kernel/security done Loading AppArmor profiles done 'boot.apparmor start' exits with status 0 boot.cleanup start 'boot.cleanup start' exits with status 0 boot.clock start Setting up the hardware clockdone 'boot.clock start' exits with status 0 boot.klog start Creating /var/log/boot.msg donekillproc: kill(854,29) 'boot.klog start' exits with status 0 boot.proc start 'boot.proc start' exits with status 0 boot.sysctl start Setting current sysctl status from /etc/sysctl.conf net.ipv4.icmp_echo_ignore_broadcasts = 1 net.ipv4.conf.all.rp_filter = 1 done 'boot.sysctl start' exits with status 0 boot.udev_retry start 'boot.udev_retry start' exits with status 0 boot.videobios start 'boot.videobios start' exits with status 0 boot.crypto start 'boot.crypto start' exits with status 0 boot.ipconfig start Enabling syn flood protectiondone Enabling IP forwardingdone done 'boot.ipconfig start' exits with status 0 boot.localnet start Setting up hostname 'metalero9'done Setting up loopback interface lo lo IP address: 127.0.0.1/8 done 'boot.localnet start' exits with status 0 boot.preload start done 'boot.preload start' exits with status 0 boot.swap start Activating remaining swap-devices in /etc/fstab... done'boot.swap start' exits with status 0 boot.ldconfig start 'boot.ldconfig start' exits with status 0 System Boot Control: The system has been set up System Boot Control: Running /etc/init.d/boot.local donekillproc: kill(854,3) INIT: Entering runlevel: 5 Boot logging started on /dev/tty1(/dev/console) at Thu Feb 1 01:47:05 2007 Master Resource Control: previous runlevel: N, switching to runlevel: 5 ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ] done startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/syslog-ng ] startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/resmgrd ] Loading AppArmor profiles - AppArmor already loaded with profiles.skipped Initializing random number generatordone startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/klogd ] Starting resource managerdone startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/acpid ] Starting syslog servicesdone Starting D-Bus daemondone Starting irqbalance unused acpid: loading ACPI modules ( ac battery button ) done acpid: will not skip unsupported modules acpid: loading ACPI laptop modules ( ) done Starting acpid done startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon --systemstartproc: execve (/usr/sbin/polkitd) [ /usr/sbin/polkitd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/polkitd ] Starting PolicyKit daemondone startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/hald ] Loading keymap i386/qwerty/es.map.gz doneLoading compose table latin1.adddone Start Unicode mode doneLoading console font lat9w-16.psfu -m trivial G0:loadable doneStarting HAL daemondone Loading CPUFreq modules (CPUFreq not supported) Starting the DHCP DBUS Daemonstartproc: execve (/usr/sbin/dhcdbd) [ /usr/sbin/dhcdbd --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/dhcdbd ] done Starting the NetworkManagerDispatcherstartproc: execve (/usr/sbin/NetworkManagerDispatcher) [ /usr/sbin/NetworkManagerDispatcher ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManagerDispatcher ] startproc: execve (/usr/sbin/NetworkManager) [ /usr/sbin/NetworkManager ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManager ] done Starting the NetworkManagerdone startproc: execve (/usr/sbin/mdnsd) [ /usr/sbin/mdnsd -f /etc/nss_mdns.conf -b ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/mdnsd ] Starting mdnsddone startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/portmap ] Starting RPC portmap daemondone Importing Net File System (NFS)unused startproc: execve (/sbin/auditd) [ /sbin/auditd -n ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/auditd ] Starting nfsboot (sm-notify) done startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] Starting Name Service Cache Daemondone startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ] Starting cupsddone startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] Checking/updating CPU microcode done Mount SMB/ CIFS File Systems unused Starting auditd done Starting SSH daemondone startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ] Starting powersaved: done checkproc: /usr/sbin/NetworkManager 2995 Starting mail service (Postfix)done startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/cron ] startproc: execve (/opt/gnome/sbin/gdm) [ /opt/gnome/sbin/gdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg LANG=es_ES.UTF-8 PREVLEVEL=N LINES=44 QT_SYSTEM_DIR=/usr/share/desktop-data HOME=/ SHLVL=2 XCURSOR_THEME=Industrial WINDOWMANAGER=/usr/bin/gnome splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/opt/gnome/sbin/gdm ] Starting CRON daemondone Starting service gdmdone Master Resource Control: runlevel 5 has been reached Skipped services in runlevel 5: irq_balancer smbfs nfs killproc: kill(2469,3)