Jan 24 16:31:14 SQ2 syslogd 1.4.1: restart.
Jan 24 16:31:14 SQ2 kernel: klogd 1.4.1, log source = /proc/kmsg started.
Jan 24 16:31:14 SQ2 kernel: Bootdata ok (command line is ro root=LABEL=ROOT)
Jan 24 16:31:14 SQ2 kernel: Linux version 2.6.18-1.2798.fc6 (brewbuilder@hs20-bc1-6.build.redhat.com) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Mon Oct 16 14:39:22 EDT 2006
Jan 24 16:31:14 SQ2 kernel: BIOS-provided physical RAM map:
Jan 24 16:31:14 SQ2 kernel:  BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
Jan 24 16:31:14 SQ2 kernel:  BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
Jan 24 16:31:14 SQ2 kernel:  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Jan 24 16:31:14 SQ2 kernel:  BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)
Jan 24 16:31:14 SQ2 kernel:  BIOS-e820: 00000000bfff0000 - 00000000bfffe000 (ACPI data)
Jan 24 16:31:14 SQ2 kernel:  BIOS-e820: 00000000bfffe000 - 00000000c0000000 (ACPI NVS)
Jan 24 16:31:14 SQ2 kernel:  BIOS-e820: 00000000fec00000 - 00000000fec03000 (reserved)
Jan 24 16:31:14 SQ2 kernel:  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Jan 24 16:31:14 SQ2 kernel:  BIOS-e820: 0000000100000000 - 0000000840000000 (usable)
Jan 24 16:31:14 SQ2 kernel: DMI 2.3 present.
Jan 24 16:31:14 SQ2 kernel: SRAT: PXM 0 -> APIC 0 -> Node 0
Jan 24 16:31:14 SQ2 kernel: SRAT: PXM 0 -> APIC 1 -> Node 0
Jan 24 16:31:14 SQ2 kernel: SRAT: PXM 1 -> APIC 2 -> Node 1
Jan 24 16:31:14 SQ2 kernel: SRAT: PXM 1 -> APIC 3 -> Node 1
Jan 24 16:31:14 SQ2 kernel: SRAT: Node 0 PXM 0 0-a0000
Jan 24 16:31:14 SQ2 kernel: SRAT: Node 0 PXM 0 0-c0000000
Jan 24 16:31:14 SQ2 kernel: SRAT: Node 0 PXM 0 0-440000000
Jan 24 16:31:14 SQ2 kernel: SRAT: Node 1 PXM 1 440000000-840000000
Jan 24 16:31:14 SQ2 kernel: Bootmem setup node 0 0000000000000000-0000000440000000
Jan 24 16:31:14 SQ2 kernel: Bootmem setup node 1 0000000440000000-0000000840000000
Jan 24 16:31:14 SQ2 kernel: ACPI: PM-Timer IO Port: 0x508
Jan 24 16:31:14 SQ2 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Jan 24 16:31:14 SQ2 kernel: Processor #0 15:1 APIC version 16
Jan 24 16:31:14 SQ2 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Jan 24 16:31:14 SQ2 kernel: Processor #1 15:1 APIC version 16
Jan 24 16:31:14 SQ2 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Jan 24 16:31:14 SQ2 kernel: Processor #2 15:1 APIC version 16
Jan 24 16:31:14 SQ2 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
Jan 24 16:31:14 SQ2 kernel: Processor #3 15:1 APIC version 16
Jan 24 16:31:14 SQ2 kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Jan 24 16:31:14 SQ2 kernel: ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
Jan 24 16:31:14 SQ2 kernel: IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-15
Jan 24 16:31:14 SQ2 kernel: ACPI: IOAPIC (id[0x05] address[0xfec01000] gsi_base[16])
Jan 24 16:31:14 SQ2 kernel: IOAPIC[1]: apic_id 5, version 17, address 0xfec01000, GSI 16-31
Jan 24 16:31:14 SQ2 kernel: ACPI: IOAPIC (id[0x06] address[0xfec02000] gsi_base[32])
Jan 24 16:31:14 SQ2 kernel: IOAPIC[2]: apic_id 6, version 17, address 0xfec02000, GSI 32-47
Jan 24 16:31:14 SQ2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jan 24 16:31:14 SQ2 kernel: Setting APIC routing to physical flat
Jan 24 16:31:14 SQ2 kernel: Using ACPI (MADT) for SMP configuration information
Jan 24 16:31:14 SQ2 kernel: Nosave address range: 000000000009f000 - 00000000000a0000
Jan 24 16:31:14 SQ2 kernel: Nosave address range: 00000000000a0000 - 00000000000e0000
Jan 24 16:31:14 SQ2 kernel: Nosave address range: 00000000000e0000 - 0000000000100000
Jan 24 16:31:14 SQ2 kernel: Nosave address range: 00000000bfff0000 - 00000000bfffe000
Jan 24 16:31:14 SQ2 kernel: Nosave address range: 00000000bfffe000 - 00000000c0000000
Jan 24 16:31:14 SQ2 kernel: Nosave address range: 00000000c0000000 - 00000000fec00000
Jan 24 16:31:14 SQ2 kernel: Nosave address range: 00000000fec00000 - 00000000fec03000
Jan 24 16:31:14 SQ2 kernel: Nosave address range: 00000000fec03000 - 00000000fee00000
Jan 24 16:31:14 SQ2 kernel: Nosave address range: 00000000fee00000 - 00000000fee01000
Jan 24 16:31:14 SQ2 kernel: Nosave address range: 00000000fee01000 - 0000000100000000
Jan 24 16:31:14 SQ2 kernel: Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000)
Jan 24 16:31:14 SQ2 kernel: SMP: Allowing 4 CPUs, 0 hotplug CPUs
Jan 24 16:31:14 SQ2 kernel: Built 2 zonelists.  Total pages: 8251985
Jan 24 16:31:14 SQ2 kernel: Kernel command line: ro root=LABEL=ROOT
Jan 24 16:31:14 SQ2 kernel: Initializing CPU#0
Jan 24 16:31:14 SQ2 kernel: PID hash table entries: 4096 (order: 12, 32768 bytes)
Jan 24 16:31:14 SQ2 kernel: Disabling vsyscall due to use of PM timer
Jan 24 16:31:14 SQ2 rpc.statd[2131]: Version 1.0.9 Starting
Jan 24 16:31:14 SQ2 kernel: time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
Jan 24 16:31:14 SQ2 kernel: time.c: Detected 2394.114 MHz processor.
Jan 24 16:31:14 SQ2 kernel: Console: colour VGA+ 80x25
Jan 24 16:31:14 SQ2 kernel: Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Jan 24 16:31:14 SQ2 kernel: Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Jan 24 16:31:14 SQ2 kernel: Checking aperture...
Jan 24 16:31:14 SQ2 kernel: CPU 0: aperture @ c0000000 size 128 MB
Jan 24 16:31:14 SQ2 rpc.statd[2131]: statd running as root. chown /var/lib/nfs/statd/sm to choose different user 
Jan 24 16:31:14 SQ2 kernel: CPU 1: aperture @ c0000000 size 128 MB
Jan 24 16:31:14 SQ2 kernel: Memory: 32956496k/34603008k available (2409k kernel code, 597484k reserved, 1722k data, 204k init)
Jan 24 16:31:14 SQ2 kernel: Calibrating delay using timer specific routine.. 4792.24 BogoMIPS (lpj=9584491)
Jan 24 16:31:14 SQ2 kernel: Security Framework v1.0.0 initialized
Jan 24 16:31:14 SQ2 kernel: SELinux:  Initializing.
Jan 24 16:31:14 SQ2 kernel: SELinux:  Starting in permissive mode
Jan 24 16:31:14 SQ2 kernel: selinux_register_security:  Registering secondary module capability
Jan 24 16:31:14 SQ2 kernel: Capability LSM initialized as secondary
Jan 24 16:31:14 SQ2 kernel: Mount-cache hash table entries: 256
Jan 24 16:31:14 SQ2 kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Jan 24 16:31:14 SQ2 kernel: CPU: L2 Cache: 1024K (64 bytes/line)
Jan 24 16:31:14 SQ2 kernel: CPU 0/0 -> Node 0
Jan 24 16:31:14 SQ2 kernel: CPU: Physical Processor ID: 0
Jan 24 16:31:14 SQ2 kernel: CPU: Processor Core ID: 0
Jan 24 16:31:14 SQ2 kernel: SMP alternatives: switching to UP code
Jan 24 16:31:14 SQ2 kernel: ACPI: Core revision 20060707
Jan 24 16:31:14 SQ2 kernel: Using local APIC timer interrupts.
Jan 24 16:31:14 SQ2 kernel: result 12469355
Jan 24 16:31:14 SQ2 kernel: Detected 12.469 MHz APIC timer.
Jan 24 16:31:14 SQ2 kernel: SMP alternatives: switching to SMP code
Jan 24 16:31:14 SQ2 kernel: Booting processor 1/4 APIC 0x1
Jan 24 16:31:14 SQ2 kernel: Initializing CPU#1
Jan 24 16:31:14 SQ2 kernel: Calibrating delay using timer specific routine.. 4788.37 BogoMIPS (lpj=9576741)
Jan 24 16:31:14 SQ2 kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Jan 24 16:31:14 SQ2 kernel: CPU: L2 Cache: 1024K (64 bytes/line)
Jan 24 16:31:14 SQ2 kernel: CPU 1/1 -> Node 0
Jan 24 16:31:14 SQ2 kernel: CPU: Physical Processor ID: 0
Jan 24 16:31:14 SQ2 kernel: CPU: Processor Core ID: 1
Jan 24 16:31:14 SQ2 kernel: Dual-Core AMD Opteron(tm) Processor 2216 stepping 02
Jan 24 16:31:14 SQ2 kernel: CPU 1: Syncing TSC to CPU 0.
Jan 24 16:31:14 SQ2 kernel: CPU 1: synchronized TSC with CPU 0 (last diff -4 cycles, maxerr 665 cycles)
Jan 24 16:31:14 SQ2 kernel: SMP alternatives: switching to SMP code
Jan 24 16:31:14 SQ2 kernel: Booting processor 2/4 APIC 0x2
Jan 24 16:31:14 SQ2 kernel: Initializing CPU#2
Jan 24 16:31:14 SQ2 kernel: Calibrating delay using timer specific routine.. 4788.37 BogoMIPS (lpj=9576743)
Jan 24 16:31:14 SQ2 kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Jan 24 16:31:14 SQ2 kernel: CPU: L2 Cache: 1024K (64 bytes/line)
Jan 24 16:31:14 SQ2 kernel: CPU 2/2 -> Node 1
Jan 24 16:31:14 SQ2 kernel: CPU: Physical Processor ID: 1
Jan 24 16:31:14 SQ2 kernel: CPU: Processor Core ID: 0
Jan 24 16:31:14 SQ2 kernel: Dual-Core AMD Opteron(tm) Processor 2216 stepping 02
Jan 24 16:31:14 SQ2 kernel: CPU 2: Syncing TSC to CPU 0.
Jan 24 16:31:14 SQ2 kernel: CPU 2: synchronized TSC with CPU 0 (last diff 38 cycles, maxerr 1226 cycles)
Jan 24 16:31:14 SQ2 kernel: SMP alternatives: switching to SMP code
Jan 24 16:31:14 SQ2 kernel: Booting processor 3/4 APIC 0x3
Jan 24 16:31:14 SQ2 kernel: Initializing CPU#3
Jan 24 16:31:14 SQ2 kernel: Calibrating delay using timer specific routine.. 4788.32 BogoMIPS (lpj=9576650)
Jan 24 16:31:14 SQ2 kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Jan 24 16:31:14 SQ2 kernel: CPU: L2 Cache: 1024K (64 bytes/line)
Jan 24 16:31:14 SQ2 kernel: CPU 3/3 -> Node 1
Jan 24 16:31:14 SQ2 kernel: CPU: Physical Processor ID: 1
Jan 24 16:31:14 SQ2 kernel: CPU: Processor Core ID: 1
Jan 24 16:31:14 SQ2 kernel: Dual-Core AMD Opteron(tm) Processor 2216 stepping 02
Jan 24 16:31:14 SQ2 kernel: CPU 3: Syncing TSC to CPU 0.
Jan 24 16:31:14 SQ2 kernel: CPU 3: synchronized TSC with CPU 0 (last diff -4 cycles, maxerr 1226 cycles)
Jan 24 16:31:14 SQ2 kernel: Brought up 4 CPUs
Jan 24 16:31:14 SQ2 kernel: testing NMI watchdog ... OK.
Jan 24 16:31:14 SQ2 kernel: migration_cost=783,965
Jan 24 16:31:14 SQ2 kernel: checking if image is initramfs... it is
Jan 24 16:31:14 SQ2 kernel: Freeing initrd memory: 1512k freed
Jan 24 16:31:14 SQ2 kernel: NET: Registered protocol family 16
Jan 24 16:31:14 SQ2 kernel: ACPI: bus type pci registered
Jan 24 16:31:14 SQ2 kernel: PCI: Using configuration type 1
Jan 24 16:31:14 SQ2 kernel: ACPI: Interpreter enabled
Jan 24 16:31:14 SQ2 kernel: ACPI: Using IOAPIC for interrupt routing
Jan 24 16:31:14 SQ2 kernel: Error attaching device data
Jan 24 16:31:14 SQ2 last message repeated 3 times
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Jan 24 16:31:14 SQ2 kernel: PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.1
Jan 24 16:31:14 SQ2 kernel: PCI: Firmware left 0000:00:04.0 e100 interrupts enabled, disabling
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LN00] (IRQs 3 4 5 7 *9 11 12 14 15)
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LN01] (IRQs 1 3 4 5 6 7 9 *11 12 14 15)
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LN02] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled.
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LN03] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled.
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LN04] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled.
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LN05] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled.
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LN06] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled.
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LN07] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled.
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LN08] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled.
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LN09] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled.
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LN10] (IRQs 1 3 4 5 6 *7 9 11 12 14 15)
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LN11] (IRQs 1 3 4 *5 6 7 9 11 12 14 15)
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LN12] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled.
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LN13] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled.
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LN14] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled.
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LN15] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled.
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LN16] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled.
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LN17] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled.
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LN18] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled.
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LN19] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled.
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LN20] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled.
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LN21] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled.
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LN22] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled.
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LN23] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled.
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LN24] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled.
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LN25] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled.
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LN26] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled.
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LN27] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled.
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LN28] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled.
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LN29] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled.
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LN30] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled.
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LNUS] (IRQs *10)
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt Link [LNSA] (IRQs *11)
Jan 24 16:31:14 SQ2 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Jan 24 16:31:14 SQ2 kernel: pnp: PnP ACPI init
Jan 24 16:31:14 SQ2 kernel: pnp: PnP ACPI: found 13 devices
Jan 24 16:31:14 SQ2 hcid[2181]: Bluetooth HCI daemon
Jan 24 16:31:14 SQ2 kernel: usbcore: registered new driver usbfs
Jan 24 16:31:14 SQ2 kernel: usbcore: registered new driver hub
Jan 24 16:31:14 SQ2 kernel: PCI: Using ACPI for IRQ routing
Jan 24 16:31:14 SQ2 kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Jan 24 16:31:14 SQ2 kernel: NetLabel: Initializing
Jan 24 16:31:14 SQ2 kernel: NetLabel:  domain hash size = 128
Jan 24 16:31:14 SQ2 kernel: NetLabel:  protocols = UNLABELED CIPSOv4
Jan 24 16:31:14 SQ2 kernel: NetLabel:  unlabeled traffic allowed by default
Jan 24 16:31:14 SQ2 kernel: PCI-DMA: Disabling AGP.
Jan 24 16:31:14 SQ2 kernel: PCI-DMA: aperture base @ c0000000 size 131072 KB
Jan 24 16:31:14 SQ2 kernel: PCI-DMA: using GART IOMMU.
Jan 24 16:31:14 SQ2 kernel: PCI-DMA: Reserving 128MB of IOMMU area in the AGP aperture
Jan 24 16:31:14 SQ2 kernel: pnp: 00:08: ioport range 0x580-0x58f has been reserved
Jan 24 16:31:14 SQ2 kernel: pnp: 00:08: ioport range 0x590-0x593 has been reserved
Jan 24 16:31:14 SQ2 kernel: pnp: 00:08: ioport range 0x700-0x703 has been reserved
Jan 24 16:31:14 SQ2 kernel: pnp: 00:08: ioport range 0xca0-0xcaf has been reserved
Jan 24 16:31:14 SQ2 kernel: pnp: 00:0a: ioport range 0x600-0x61f has been reserved
Jan 24 16:31:14 SQ2 kernel: pnp: 00:0a: ioport range 0x520-0x53f has been reserved
Jan 24 16:31:14 SQ2 kernel: pnp: 00:0a: ioport range 0x540-0x54f could not be reserved
Jan 24 16:31:14 SQ2 kernel: pnp: 00:0a: ioport range 0x640-0x65f has been reserved
Jan 24 16:31:14 SQ2 kernel: PCI: Bridge: 0000:01:0d.0
Jan 24 16:31:14 SQ2 kernel:   IO window: disabled.
Jan 24 16:31:14 SQ2 kernel:   MEM window: disabled.
Jan 24 16:31:14 SQ2 kernel:   PREFETCH window: disabled.
Jan 24 16:31:14 SQ2 kernel: PCI: Bridge: 0000:00:01.0
Jan 24 16:31:14 SQ2 kernel:   IO window: a000-bfff
Jan 24 16:31:14 SQ2 kernel:   MEM window: ff400000-ff4fffff
Jan 24 16:31:14 SQ2 kernel:   PREFETCH window: disabled.
Jan 24 16:31:14 SQ2 kernel: PCI: Bridge: 0000:00:06.0
Jan 24 16:31:14 SQ2 kernel:   IO window: disabled.
Jan 24 16:31:14 SQ2 kernel:   MEM window: disabled.
Jan 24 16:31:14 SQ2 kernel:   PREFETCH window: disabled.
Jan 24 16:31:14 SQ2 kernel: PCI: Bridge: 0000:00:07.0
Jan 24 16:31:14 SQ2 kernel:   IO window: disabled.
Jan 24 16:31:14 SQ2 kernel:   MEM window: ff500000-ff5fffff
Jan 24 16:31:14 SQ2 kernel:   PREFETCH window: cfe00000-cfefffff
Jan 24 16:31:14 SQ2 kernel: PCI: Bridge: 0000:00:08.0
Jan 24 16:31:14 SQ2 kernel:   IO window: disabled.
Jan 24 16:31:14 SQ2 kernel:   MEM window: disabled.
Jan 24 16:31:14 SQ2 kernel:   PREFETCH window: disabled.
Jan 24 16:31:14 SQ2 kernel: PCI: Bridge: 0000:00:09.0
Jan 24 16:31:14 SQ2 kernel:   IO window: disabled.
Jan 24 16:31:14 SQ2 kernel:   MEM window: disabled.
Jan 24 16:31:14 SQ2 kernel:   PREFETCH window: disabled.
Jan 24 16:31:14 SQ2 kernel: PCI: Bridge: 0000:00:0a.0
Jan 24 16:31:14 SQ2 kernel:   IO window: disabled.
Jan 24 16:31:14 SQ2 kernel:   MEM window: disabled.
Jan 24 16:31:14 SQ2 kernel:   PREFETCH window: disabled.
Jan 24 16:31:14 SQ2 kernel: PCI: Bridge: 0000:00:0b.0
Jan 24 16:31:14 SQ2 kernel:   IO window: disabled.
Jan 24 16:31:14 SQ2 kernel:   MEM window: disabled.
Jan 24 16:31:14 SQ2 kernel:   PREFETCH window: disabled.
Jan 24 16:31:14 SQ2 kernel: NET: Registered protocol family 2
Jan 24 16:31:14 SQ2 kernel: IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
Jan 24 16:31:14 SQ2 kernel: TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
Jan 24 16:31:14 SQ2 kernel: TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
Jan 24 16:31:14 SQ2 sdpd[2187]: Bluetooth SDP daemon 
Jan 24 16:31:14 SQ2 kernel: TCP: Hash tables configured (established 131072 bind 65536)
Jan 24 16:31:14 SQ2 kernel: TCP reno registered
Jan 24 16:31:14 SQ2 kernel: audit: initializing netlink socket (disabled)
Jan 24 16:31:14 SQ2 kernel: audit(1169652653.392:1): initialized
Jan 24 16:31:14 SQ2 kernel: Total HugeTLB memory allocated, 0
Jan 24 16:31:14 SQ2 kernel: VFS: Disk quotas dquot_6.5.1
Jan 24 16:31:14 SQ2 kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Jan 24 16:31:14 SQ2 kernel: SELinux:  Registering netfilter hooks
Jan 24 16:31:14 SQ2 kernel: Initializing Cryptographic API
Jan 24 16:31:14 SQ2 kernel: ksign: Installing public key data
Jan 24 16:31:14 SQ2 kernel: Loading keyring
Jan 24 16:31:14 SQ2 kernel: - Added public key 4D36EEF71C3A3150
Jan 24 16:31:14 SQ2 kernel: - User ID: Red Hat, Inc. (Kernel Module GPG key)
Jan 24 16:31:14 SQ2 kernel: io scheduler noop registered
Jan 24 16:31:14 SQ2 kernel: io scheduler anticipatory registered
Jan 24 16:31:14 SQ2 kernel: io scheduler deadline registered
Jan 24 16:31:14 SQ2 kernel: io scheduler cfq registered (default)
Jan 24 16:31:14 SQ2 kernel: pcie_portdrv_probe->Dev[0132:1166] has invalid IRQ. Check vendor BIOS
Jan 24 16:31:14 SQ2 last message repeated 3 times
Jan 24 16:31:14 SQ2 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jan 24 16:31:14 SQ2 kernel: Real Time Clock Driver v1.12ac
Jan 24 16:31:14 SQ2 kernel: Non-volatile memory driver v1.2
Jan 24 16:31:14 SQ2 kernel: Linux agpgart interface v0.101 (c) Dave Jones
Jan 24 16:31:14 SQ2 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Jan 24 16:31:14 SQ2 kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jan 24 16:31:14 SQ2 kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Jan 24 16:31:14 SQ2 kernel: 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jan 24 16:31:14 SQ2 kernel: 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Jan 24 16:31:14 SQ2 kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Jan 24 16:31:14 SQ2 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jan 24 16:31:14 SQ2 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jan 24 16:31:14 SQ2 kernel: SvrWks HT1000: IDE controller at PCI slot 0000:00:02.1
Jan 24 16:31:14 SQ2 kernel: SvrWks HT1000: chipset revision 0
Jan 24 16:31:14 SQ2 kernel: SvrWks HT1000: not 100% native mode: will probe irqs later
Jan 24 16:31:14 SQ2 kernel:     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:DMA
Jan 24 16:31:14 SQ2 kernel: hdb: DV-28E-N, ATAPI CD/DVD-ROM drive
Jan 24 16:31:14 SQ2 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jan 24 16:31:14 SQ2 kernel: ide-floppy driver 0.99.newide
Jan 24 16:31:14 SQ2 kernel: usbcore: registered new driver libusual
Jan 24 16:31:14 SQ2 pcscd: pcscdaemon.c:464:main() pcsc-lite 1.3.1 daemon ready.
Jan 24 16:31:14 SQ2 kernel: usbcore: registered new driver hiddev
Jan 24 16:31:14 SQ2 kernel: usbcore: registered new driver usbhid
Jan 24 16:31:14 SQ2 kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Jan 24 16:31:14 SQ2 kernel: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Jan 24 16:31:14 SQ2 kernel: PNP: PS/2 controller doesn't have AUX irq; using default 12
Jan 24 16:31:14 SQ2 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Jan 24 16:31:14 SQ2 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jan 24 16:31:14 SQ2 kernel: mice: PS/2 mouse device common for all mice
Jan 24 16:31:14 SQ2 kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
Jan 24 16:31:14 SQ2 kernel: md: bitmap version 4.39
Jan 24 16:31:14 SQ2 hidd[2266]: Bluetooth HID daemon
Jan 24 16:31:14 SQ2 kernel: TCP bic registered
Jan 24 16:31:14 SQ2 kernel: Initializing IPsec netlink socket
Jan 24 16:31:14 SQ2 kernel: NET: Registered protocol family 1
Jan 24 16:31:14 SQ2 kernel: NET: Registered protocol family 17
Jan 24 16:31:14 SQ2 kernel: powernow-k8: Found 4 Dual-Core AMD Opteron(tm) Processor 2216 processors (version 2.00.00)
Jan 24 16:31:14 SQ2 kernel: powernow-k8: MP systems not supported by PSB BIOS structure
Jan 24 16:31:14 SQ2 last message repeated 3 times
Jan 24 16:31:14 SQ2 kernel: ACPI: (supports S0 S1 S4 S5)
Jan 24 16:31:14 SQ2 kernel: Freeing unused kernel memory: 204k freed
Jan 24 16:31:14 SQ2 kernel: Write protecting the kernel read-only data: 462k
Jan 24 16:31:14 SQ2 kernel: input: AT Translated Set 2 keyboard as /class/input/input0
Jan 24 16:31:14 SQ2 kernel: USB Universal Host Controller Interface driver v3.0
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 10 (level, low) -> IRQ 10
Jan 24 16:31:14 SQ2 kernel: ohci_hcd 0000:00:03.0: OHCI Host Controller
Jan 24 16:31:14 SQ2 kernel: ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
Jan 24 16:31:14 SQ2 kernel: ohci_hcd 0000:00:03.0: irq 10, io mem 0xff6e8000
Jan 24 16:31:14 SQ2 kernel: usb usb1: configuration #1 chosen from 1 choice
Jan 24 16:31:14 SQ2 kernel: hub 1-0:1.0: USB hub found
Jan 24 16:31:14 SQ2 kernel: hub 1-0:1.0: 2 ports detected
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt 0000:00:03.1[A] -> GSI 10 (level, low) -> IRQ 10
Jan 24 16:31:14 SQ2 kernel: ohci_hcd 0000:00:03.1: OHCI Host Controller
Jan 24 16:31:14 SQ2 kernel: ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
Jan 24 16:31:14 SQ2 kernel: ohci_hcd 0000:00:03.1: irq 10, io mem 0xff6e9000
Jan 24 16:31:14 SQ2 kernel: usb usb2: configuration #1 chosen from 1 choice
Jan 24 16:31:14 SQ2 kernel: hub 2-0:1.0: USB hub found
Jan 24 16:31:14 SQ2 kernel: hub 2-0:1.0: 2 ports detected
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt 0000:00:03.2[A] -> GSI 10 (level, low) -> IRQ 10
Jan 24 16:31:14 SQ2 kernel: ehci_hcd 0000:00:03.2: EHCI Host Controller
Jan 24 16:31:14 SQ2 kernel: ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
Jan 24 16:31:14 SQ2 kernel: ehci_hcd 0000:00:03.2: irq 10, io mem 0xff6ea000
Jan 24 16:31:14 SQ2 kernel: ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 24 16:31:14 SQ2 kernel: usb usb3: configuration #1 chosen from 1 choice
Jan 24 16:31:14 SQ2 kernel: hub 3-0:1.0: USB hub found
Jan 24 16:31:14 SQ2 kernel: hub 3-0:1.0: 4 ports detected
Jan 24 16:31:14 SQ2 kernel: SCSI subsystem initialized
Jan 24 16:31:14 SQ2 kernel: ACPI: PCI Interrupt 0000:01:0e.0[A] -> GSI 11 (level, low) -> IRQ 11
Jan 24 16:31:14 SQ2 kernel: ata1: SATA max UDMA/133 cmd 0xFFFFC2000001C000 ctl 0xFFFFC2000001C020 bmdma 0xFFFFC2000001C030 irq 11
Jan 24 16:31:14 SQ2 kernel: ata2: SATA max UDMA/133 cmd 0xFFFFC2000001C100 ctl 0xFFFFC2000001C120 bmdma 0xFFFFC2000001C130 irq 11
Jan 24 16:31:14 SQ2 kernel: ata3: SATA max UDMA/133 cmd 0xFFFFC2000001C200 ctl 0xFFFFC2000001C220 bmdma 0xFFFFC2000001C230 irq 11
Jan 24 16:31:14 SQ2 kernel: ata4: SATA max UDMA/133 cmd 0xFFFFC2000001C300 ctl 0xFFFFC2000001C320 bmdma 0xFFFFC2000001C330 irq 11
Jan 24 16:31:14 SQ2 kernel: scsi0 : sata_svw
Jan 24 16:31:14 SQ2 kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 16:31:14 SQ2 kernel: ata1.00: ATA-7, max UDMA/133, 293046768 sectors: LBA48 NCQ (depth 0/32)
Jan 24 16:31:14 SQ2 kernel: ata1.00: ata1: dev 0 multi count 16
Jan 24 16:31:14 SQ2 kernel: ata1.00: configured for UDMA/133
Jan 24 16:31:14 SQ2 kernel: scsi1 : sata_svw
Jan 24 16:31:14 SQ2 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 16:31:14 SQ2 kernel: ata2.00: ATA-7, max UDMA/133, 293046768 sectors: LBA48 NCQ (depth 0/32)
Jan 24 16:31:15 SQ2 kernel: ata2.00: ata2: dev 0 multi count 16
Jan 24 16:31:15 SQ2 kernel: ata2.00: configured for UDMA/133
Jan 24 16:31:15 SQ2 kernel: scsi2 : sata_svw
Jan 24 16:31:15 SQ2 kernel: ata3: SATA link down (SStatus 4 SControl 300)
Jan 24 16:31:15 SQ2 kernel: ATA: abnormal status 0x7F on port 0xFFFFC2000001C21C
Jan 24 16:31:15 SQ2 kernel: scsi3 : sata_svw
Jan 24 16:31:15 SQ2 kernel: ata4: SATA link down (SStatus 4 SControl 300)
Jan 24 16:31:15 SQ2 kernel: ATA: abnormal status 0x7F on port 0xFFFFC2000001C31C
Jan 24 16:31:15 SQ2 kernel:   Vendor: ATA       Model: WDC WD1500ADFD-0  Rev: 20.0
Jan 24 16:31:15 SQ2 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 05
Jan 24 16:31:15 SQ2 kernel: SCSI device sda: 293046768 512-byte hdwr sectors (150040 MB)
Jan 24 16:31:15 SQ2 kernel: sda: Write Protect is off
Jan 24 16:31:15 SQ2 automount[2281]: lookup_read_master: lookup(nisplus): couldn't locat nis+ table auto.master
Jan 24 16:31:15 SQ2 kernel: SCSI device sda: drive cache: write back
Jan 24 16:31:15 SQ2 kernel: SCSI device sda: 293046768 512-byte hdwr sectors (150040 MB)
Jan 24 16:31:15 SQ2 kernel: sda: Write Protect is off
Jan 24 16:31:15 SQ2 kernel: SCSI device sda: drive cache: write back
Jan 24 16:31:15 SQ2 kernel:  sda: sda1 sda2 sda3
Jan 24 16:31:15 SQ2 kernel: sd 0:0:0:0: Attached scsi disk sda
Jan 24 16:31:15 SQ2 kernel:   Vendor: ATA       Model: WDC WD1500ADFD-0  Rev: 20.0
Jan 24 16:31:15 SQ2 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 05
Jan 24 16:31:15 SQ2 kernel: SCSI device sdb: 293046768 512-byte hdwr sectors (150040 MB)
Jan 24 16:31:15 SQ2 kernel: sdb: Write Protect is off
Jan 24 16:31:15 SQ2 kernel: SCSI device sdb: drive cache: write back
Jan 24 16:31:15 SQ2 kernel: SCSI device sdb: 293046768 512-byte hdwr sectors (150040 MB)
Jan 24 16:31:15 SQ2 kernel: sdb: Write Protect is off
Jan 24 16:31:15 SQ2 kernel: SCSI device sdb: drive cache: write back
Jan 24 16:31:15 SQ2 kernel:  sdb: sdb1 sdb2
Jan 24 16:31:15 SQ2 kernel: sd 1:0:0:0: Attached scsi disk sdb
Jan 24 16:31:15 SQ2 kernel: ACPI: PCI Interrupt 0000:01:0e.1[A] -> GSI 11 (level, low) -> IRQ 11
Jan 24 16:31:15 SQ2 kernel: kjournald starting.  Commit interval 5 seconds
Jan 24 16:31:15 SQ2 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 24 16:31:15 SQ2 kernel: SELinux:  Disabled at runtime.
Jan 24 16:31:15 SQ2 kernel: SELinux:  Unregistering netfilter hooks
Jan 24 16:31:15 SQ2 kernel: audit(1169652658.492:2): selinux=0 auid=4294967295
Jan 24 16:31:15 SQ2 kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jan 24 16:31:15 SQ2 kernel: tg3.c:v3.65 (August 07, 2006)
Jan 24 16:31:15 SQ2 kernel: GSI 16 sharing vector 0xA9 and IRQ 16
Jan 24 16:31:15 SQ2 kernel: ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 26 (level, low) -> IRQ 169
Jan 24 16:31:15 SQ2 kernel: eth0: Tigon3 [partno(BCM95780) rev 8003 PHY(5780)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:47:0f:34
Jan 24 16:31:15 SQ2 kernel: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
Jan 24 16:31:15 SQ2 kernel: eth0: dma_rwctrl[76144000] dma_mask[40-bit]
Jan 24 16:31:15 SQ2 kernel: GSI 17 sharing vector 0xB1 and IRQ 17
Jan 24 16:31:15 SQ2 kernel: ACPI: PCI Interrupt 0000:04:04.1[B] -> GSI 27 (level, low) -> IRQ 177
Jan 24 16:31:15 SQ2 kernel: input: PC Speaker as /class/input/input1
Jan 24 16:31:15 SQ2 kernel: EDAC MC: Ver: 2.0.1 Oct 16 2006
Jan 24 16:31:15 SQ2 kernel: eth1: Tigon3 [partno(BCM95780) rev 8003 PHY(5780)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:47:0f:35
Jan 24 16:31:15 SQ2 kernel: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
Jan 24 16:31:15 SQ2 kernel: eth1: dma_rwctrl[76144000] dma_mask[40-bit]
Jan 24 16:31:15 SQ2 kernel: e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
Jan 24 16:31:15 SQ2 kernel: e100: Copyright(c) 1999-2005 Intel Corporation
Jan 24 16:31:15 SQ2 kernel: GSI 18 sharing vector 0xB9 and IRQ 18
Jan 24 16:31:15 SQ2 kernel: ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 185
Jan 24 16:31:15 SQ2 kernel: e100: eth2: e100_probe: addr 0xff6e7000, irq 185, MAC addr 00:E0:81:47:0E:7E
Jan 24 16:31:15 SQ2 kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 24 16:31:15 SQ2 kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
Jan 24 16:31:15 SQ2 kernel: EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
Jan 24 16:31:15 SQ2 kernel: EDAC MC1: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:19.2
Jan 24 16:31:15 SQ2 kernel: hdb: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33)
Jan 24 16:31:15 SQ2 kernel: Uniform CD-ROM driver Revision: 3.20
Jan 24 16:31:15 SQ2 kernel: floppy0: no floppy controllers found
Jan 24 16:31:15 SQ2 kernel: lp: driver loaded but no devices found
Jan 24 16:31:15 SQ2 kernel: ACPI: Power Button (FF) [PWRF]
Jan 24 16:31:15 SQ2 kernel: ACPI: Sleep Button (FF) [SLPF]
Jan 24 16:31:15 SQ2 kernel: ACPI: Power Button (CM) [PWRB]
Jan 24 16:31:15 SQ2 kernel: ibm_acpi: ec object not found
Jan 24 16:31:15 SQ2 kernel: md: Autodetecting RAID arrays.
Jan 24 16:31:15 SQ2 kernel: md: autorun ...
Jan 24 16:31:15 SQ2 kernel: md: ... autorun DONE.
Jan 24 16:31:15 SQ2 kernel: device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
Jan 24 16:31:15 SQ2 kernel: device-mapper: multipath: version 1.0.4 loaded
Jan 24 16:31:15 SQ2 kernel: EXT3 FS on sda2, internal journal
Jan 24 16:31:15 SQ2 kernel: kjournald starting.  Commit interval 5 seconds
Jan 24 16:31:15 SQ2 kernel: EXT3 FS on sda1, internal journal
Jan 24 16:31:15 SQ2 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 24 16:31:15 SQ2 kernel: kjournald starting.  Commit interval 5 seconds
Jan 24 16:31:15 SQ2 kernel: EXT3 FS on sdb1, internal journal
Jan 24 16:31:15 SQ2 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 24 16:31:15 SQ2 kernel: kjournald starting.  Commit interval 5 seconds
Jan 24 16:31:15 SQ2 kernel: EXT3 FS on sdb2, internal journal
Jan 24 16:31:15 SQ2 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 24 16:31:15 SQ2 kernel: Adding 3060372k swap on /dev/sda3.  Priority:-1 extents:1 across:3060372k
Jan 24 16:31:15 SQ2 kernel: NET: Registered protocol family 10
Jan 24 16:31:15 SQ2 kernel: lo: Disabled Privacy Extensions
Jan 24 16:31:15 SQ2 kernel: IPv6 over IPv4 tunneling driver
Jan 24 16:31:15 SQ2 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Jan 24 16:31:15 SQ2 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 24 16:31:15 SQ2 kernel: Netfilter messages via NETLINK v0.30.
Jan 24 16:31:15 SQ2 kernel: ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
Jan 24 16:31:15 SQ2 kernel: process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead.
Jan 24 16:31:15 SQ2 kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan 24 16:31:15 SQ2 kernel: Bluetooth: Core ver 2.10
Jan 24 16:31:15 SQ2 kernel: NET: Registered protocol family 31
Jan 24 16:31:15 SQ2 kernel: Bluetooth: HCI device and connection manager initialized
Jan 24 16:31:15 SQ2 kernel: Bluetooth: HCI socket layer initialized
Jan 24 16:31:15 SQ2 kernel: Bluetooth: L2CAP ver 2.8
Jan 24 16:31:15 SQ2 kernel: Bluetooth: L2CAP socket layer initialized
Jan 24 16:31:15 SQ2 kernel: Bluetooth: RFCOMM socket layer initialized
Jan 24 16:31:15 SQ2 kernel: Bluetooth: RFCOMM TTY layer initialized
Jan 24 16:31:15 SQ2 kernel: Bluetooth: RFCOMM ver 1.8
Jan 24 16:31:15 SQ2 kernel: Bluetooth: HIDP (Human Interface Emulation) ver 1.1
Jan 24 16:31:15 SQ2 gpm[2347]: *** info [startup.c(95)]: 
Jan 24 16:31:15 SQ2 gpm[2347]: Started gpm successfully. Entered daemon mode.
Jan 24 16:31:16 SQ2 avahi-daemon[2408]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70).
Jan 24 16:31:16 SQ2 avahi-daemon[2408]: Successfully dropped root privileges.
Jan 24 16:31:16 SQ2 avahi-daemon[2408]: avahi-daemon 0.6.11 starting up.
Jan 24 16:31:16 SQ2 avahi-daemon[2408]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
Jan 24 16:31:16 SQ2 avahi-daemon[2408]: Successfully called chroot().
Jan 24 16:31:16 SQ2 avahi-daemon[2408]: Successfully dropped remaining capabilities.
Jan 24 16:31:16 SQ2 avahi-daemon[2408]: No service found in /etc/avahi/services.
Jan 24 16:31:16 SQ2 avahi-daemon[2408]: New relevant interface eth0.IPv4 for mDNS.
Jan 24 16:31:16 SQ2 avahi-daemon[2408]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.0.131.
Jan 24 16:31:16 SQ2 avahi-daemon[2408]: Network interface enumeration completed.
Jan 24 16:31:16 SQ2 avahi-daemon[2408]: Registering new address record for 192.168.0.131 on eth0.
Jan 24 16:31:16 SQ2 avahi-daemon[2408]: Registering HINFO record with values 'X86_64'/'LINUX'.
Jan 24 16:31:17 SQ2 avahi-daemon[2408]: Server startup complete. Host name is SQ2.local. Local service cookie is 118441920.
Jan 24 16:31:18 SQ2 smartd[2466]: smartd version 5.36 [x86_64-redhat-linux-gnu] Copyright (C) 2002-6 Bruce Allen 
Jan 24 16:31:18 SQ2 smartd[2466]: Home page is http://smartmontools.sourceforge.net/  
Jan 24 16:31:18 SQ2 smartd[2466]: Opened configuration file /etc/smartd.conf 
Jan 24 16:31:18 SQ2 smartd[2466]: Configuration file /etc/smartd.conf parsed. 
Jan 24 16:31:18 SQ2 smartd[2466]: Device: /dev/sda, opened 
Jan 24 16:31:18 SQ2 smartd[2466]: Device: /dev/sda, not found in smartd database. 
Jan 24 16:31:19 SQ2 smartd[2466]: Device: /dev/sda, is SMART capable. Adding to "monitor" list. 
Jan 24 16:31:19 SQ2 smartd[2466]: Device: /dev/sdb, opened 
Jan 24 16:31:19 SQ2 smartd[2466]: Device: /dev/sdb, not found in smartd database. 
Jan 24 16:31:19 SQ2 smartd[2466]: Device: /dev/sdb, is SMART capable. Adding to "monitor" list. 
Jan 24 16:31:19 SQ2 smartd[2466]: Monitoring 2 ATA and 0 SCSI devices 
Jan 24 16:31:19 SQ2 smartd[2468]: smartd has fork()ed into background mode. New PID=2468. 
Jan 24 16:34:00 SQ2 avahi-daemon[2408]: Withdrawing address record for 192.168.0.131 on eth0.
Jan 24 16:34:00 SQ2 avahi-daemon[2408]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.0.131.
Jan 24 16:34:00 SQ2 avahi-daemon[2408]: iface.c: interface_mdns_mcast_join() called but no local address available.
Jan 24 16:34:00 SQ2 avahi-daemon[2408]: Interface eth0.IPv4 no longer relevant for mDNS.
Jan 24 16:34:01 SQ2 kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan 24 16:34:05 SQ2 avahi-daemon[2408]: New relevant interface eth0.IPv4 for mDNS.
Jan 24 16:34:05 SQ2 avahi-daemon[2408]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.0.131.
Jan 24 16:34:05 SQ2 avahi-daemon[2408]: Registering new address record for 192.168.0.131 on eth0.
Jan 24 16:34:22 SQ2 kernel: tg3: eth0: Link is up at 1000 Mbps, full duplex.
Jan 24 16:34:22 SQ2 kernel: tg3: eth0: Flow control is on for TX and on for RX.
Jan 24 16:34:22 SQ2 kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jan 24 16:34:24 SQ2 avahi-daemon[2408]: New relevant interface eth0.IPv6 for mDNS.
Jan 24 16:34:24 SQ2 avahi-daemon[2408]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::2e0:81ff:fe47:f34.
Jan 24 16:34:24 SQ2 avahi-daemon[2408]: Registering new address record for fe80::2e0:81ff:fe47:f34 on eth0.
Jan 24 17:38:36 SQ2 init: Trying to re-exec init
Jan 24 19:00:41 SQ2 kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x40000000 action 0x2 frozen
Jan 24 19:00:41 SQ2 kernel: ata2.00: (BMDMA stat 0x61)
Jan 24 19:00:41 SQ2 kernel: ata2.00: tag 0 cmd 0xca Emask 0x4 stat 0x40 err 0x0 (timeout)
Jan 24 19:00:48 SQ2 kernel: ata2: port is slow to respond, please be patient
Jan 24 19:01:11 SQ2 kernel: ata2: port failed to respond (30 secs)
Jan 24 19:01:11 SQ2 kernel: ata2: soft resetting port
Jan 24 19:01:18 SQ2 kernel: ata2: port is slow to respond, please be patient
Jan 24 19:01:41 SQ2 kernel: ata2: port failed to respond (30 secs)
Jan 24 19:01:41 SQ2 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 19:01:41 SQ2 kernel: ATA: abnormal status 0xD0 on port 0xFFFFC2000001C11C
Jan 24 19:08:17 SQ2 last message repeated 5 times
Jan 24 19:08:17 SQ2 kernel: ata2.00: qc timeout (cmd 0xec)
Jan 24 19:08:17 SQ2 kernel: ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Jan 24 19:08:17 SQ2 kernel: ata2.00: revalidation failed (errno=-5)
Jan 24 19:08:17 SQ2 kernel: ata2: failed to recover some devices, retrying in 5 secs
Jan 24 19:08:18 SQ2 kernel: ata2: hard resetting port
Jan 24 19:08:18 SQ2 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 19:08:18 SQ2 kernel: ata2.00: configured for UDMA/133
Jan 24 19:08:18 SQ2 kernel: ata2: EH complete
Jan 24 19:08:18 SQ2 kernel: SCSI device sdb: 293046768 512-byte hdwr sectors (150040 MB)
Jan 24 19:08:18 SQ2 kernel: sdb: Write Protect is off
Jan 24 19:08:18 SQ2 kernel: SCSI device sdb: drive cache: write back
Jan 24 19:35:09 SQ2 kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x40000000 action 0x2 frozen
Jan 24 19:35:09 SQ2 kernel: ata1.00: (BMDMA stat 0x61)
Jan 24 19:35:09 SQ2 kernel: ata1.00: tag 0 cmd 0x35 Emask 0x4 stat 0x40 err 0x0 (timeout)
Jan 24 19:35:09 SQ2 kernel: ata1: port is slow to respond, please be patient
Jan 24 19:35:09 SQ2 kernel: ata1: port failed to respond (30 secs)
Jan 24 19:35:09 SQ2 kernel: ata1: soft resetting port
Jan 24 19:35:09 SQ2 kernel: ata1: port is slow to respond, please be patient
Jan 24 19:35:09 SQ2 kernel: ata1: port failed to respond (30 secs)
Jan 24 19:35:09 SQ2 kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 19:35:09 SQ2 kernel: ATA: abnormal status 0xD0 on port 0xFFFFC2000001C01C
Jan 24 19:36:51 SQ2 last message repeated 5 times
Jan 24 19:36:52 SQ2 kernel: ata1.00: qc timeout (cmd 0xec)
Jan 24 19:36:53 SQ2 kernel: ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Jan 24 19:36:53 SQ2 kernel: ata1.00: revalidation failed (errno=-5)
Jan 24 19:36:54 SQ2 kernel: ata1: failed to recover some devices, retrying in 5 secs
Jan 24 19:36:55 SQ2 kernel: ata1: hard resetting port
Jan 24 19:36:55 SQ2 kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 19:36:56 SQ2 kernel: ata1.00: configured for UDMA/133
Jan 24 19:36:57 SQ2 kernel: ata1: EH complete
Jan 24 19:36:57 SQ2 kernel: SCSI device sda: 293046768 512-byte hdwr sectors (150040 MB)
Jan 24 19:36:57 SQ2 kernel: sda: Write Protect is off
Jan 24 19:36:57 SQ2 kernel: SCSI device sda: drive cache: write back
Jan 24 19:36:57 SQ2 kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x40000000 action 0x2 frozen
Jan 24 19:36:58 SQ2 kernel: ata2.00: (BMDMA stat 0x61)
Jan 24 19:36:58 SQ2 kernel: ata2.00: tag 0 cmd 0xca Emask 0x4 stat 0x40 err 0x0 (timeout)
Jan 24 19:36:59 SQ2 kernel: ata2: port is slow to respond, please be patient
Jan 24 19:37:00 SQ2 kernel: ata2: port failed to respond (30 secs)
Jan 24 19:37:01 SQ2 kernel: ata2: soft resetting port
Jan 24 19:37:02 SQ2 kernel: ata2: port is slow to respond, please be patient
Jan 24 19:37:03 SQ2 kernel: ata2: port failed to respond (30 secs)
Jan 24 19:37:04 SQ2 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 19:37:06 SQ2 kernel: ATA: abnormal status 0xD0 on port 0xFFFFC2000001C11C
Jan 24 19:37:10 SQ2 last message repeated 5 times
Jan 24 19:37:10 SQ2 kernel: ata2.00: qc timeout (cmd 0xec)
Jan 24 19:37:10 SQ2 kernel: ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Jan 24 19:37:10 SQ2 kernel: ata2.00: revalidation failed (errno=-5)
Jan 24 19:37:10 SQ2 kernel: ata2: failed to recover some devices, retrying in 5 secs
Jan 24 19:37:10 SQ2 kernel: ata2: hard resetting port
Jan 24 19:37:10 SQ2 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 19:37:10 SQ2 kernel: ata2.00: configured for UDMA/133
Jan 24 19:37:10 SQ2 kernel: ata2: EH complete
Jan 24 19:37:10 SQ2 kernel: SCSI device sdb: 293046768 512-byte hdwr sectors (150040 MB)
Jan 24 19:37:10 SQ2 kernel: sdb: Write Protect is off
Jan 24 19:37:10 SQ2 kernel: SCSI device sdb: drive cache: write back
Jan 24 19:52:37 SQ2 kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x40000000 action 0x2 frozen
Jan 24 19:52:37 SQ2 kernel: ata2.00: (BMDMA stat 0x61)
Jan 24 19:52:37 SQ2 kernel: ata2.00: tag 0 cmd 0xca Emask 0x4 stat 0x40 err 0x0 (timeout)
Jan 24 19:52:45 SQ2 kernel: ata2: port is slow to respond, please be patient
Jan 24 19:53:08 SQ2 kernel: ata2: port failed to respond (30 secs)
Jan 24 19:53:08 SQ2 kernel: ata2: soft resetting port
Jan 24 19:53:15 SQ2 kernel: ata2: port is slow to respond, please be patient
Jan 24 19:53:38 SQ2 kernel: ata2: port failed to respond (30 secs)
Jan 24 19:53:38 SQ2 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 19:53:38 SQ2 kernel: ATA: abnormal status 0xD0 on port 0xFFFFC2000001C11C
Jan 24 20:00:29 SQ2 last message repeated 5 times
Jan 24 20:03:12 SQ2 kernel: ata2.00: qc timeout (cmd 0xec)
Jan 24 20:03:14 SQ2 kernel: ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Jan 24 20:03:15 SQ2 kernel: ata2.00: revalidation failed (errno=-5)
Jan 24 20:03:17 SQ2 kernel: ata2: failed to recover some devices, retrying in 5 secs
Jan 24 20:03:18 SQ2 kernel: ata2: hard resetting port
Jan 24 20:03:19 SQ2 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 20:03:20 SQ2 kernel: ata2.00: configured for UDMA/133
Jan 24 20:03:20 SQ2 kernel: ata2: EH complete
Jan 24 20:03:20 SQ2 kernel: SCSI device sdb: 293046768 512-byte hdwr sectors (150040 MB)
Jan 24 20:03:20 SQ2 kernel: sdb: Write Protect is off
Jan 24 20:03:20 SQ2 kernel: SCSI device sdb: drive cache: write back
Jan 24 21:00:55 SQ2 kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x40000000 action 0x2 frozen
Jan 24 21:00:55 SQ2 kernel: ata1.00: (BMDMA stat 0x61)
Jan 24 21:00:55 SQ2 kernel: ata1.00: tag 0 cmd 0x35 Emask 0x4 stat 0x40 err 0x0 (timeout)
Jan 24 21:00:55 SQ2 kernel: ata1: port is slow to respond, please be patient
Jan 24 21:00:55 SQ2 kernel: ata1: port failed to respond (30 secs)
Jan 24 21:00:55 SQ2 kernel: ata1: soft resetting port
Jan 24 21:00:55 SQ2 kernel: ata1: port is slow to respond, please be patient
Jan 24 21:00:55 SQ2 kernel: ata1: port failed to respond (30 secs)
Jan 24 21:00:55 SQ2 kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 21:00:55 SQ2 kernel: ATA: abnormal status 0xD0 on port 0xFFFFC2000001C01C
Jan 24 21:09:11 SQ2 last message repeated 5 times
Jan 24 21:14:32 SQ2 kernel: ata1.00: qc timeout (cmd 0xec)
Jan 24 21:17:49 SQ2 kernel: ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Jan 24 21:21:23 SQ2 kernel: ata1.00: revalidation failed (errno=-5)
Jan 24 21:25:17 SQ2 kernel: ata1: failed to recover some devices, retrying in 5 secs
Jan 24 21:27:01 SQ2 kernel: ata1: hard resetting port
Jan 24 21:27:01 SQ2 kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 21:27:01 SQ2 kernel: ata1.00: configured for UDMA/133
Jan 24 21:27:01 SQ2 kernel: ata1: EH complete
Jan 24 21:27:01 SQ2 kernel: SCSI device sda: 293046768 512-byte hdwr sectors (150040 MB)
Jan 24 21:27:01 SQ2 kernel: sda: Write Protect is off
Jan 24 21:27:01 SQ2 kernel: SCSI device sda: drive cache: write back
Jan 24 21:27:01 SQ2 kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x40000000 action 0x2 frozen
Jan 24 21:27:01 SQ2 kernel: ata1.00: (BMDMA stat 0x61)
Jan 24 21:27:01 SQ2 kernel: ata1.00: tag 0 cmd 0xca Emask 0x4 stat 0x40 err 0x0 (timeout)
Jan 24 21:27:01 SQ2 kernel: ata1: port is slow to respond, please be patient
Jan 24 21:27:01 SQ2 kernel: ata1: port failed to respond (30 secs)
Jan 24 21:27:01 SQ2 kernel: ata1: soft resetting port
Jan 24 21:27:01 SQ2 kernel: ata1: port is slow to respond, please be patient
Jan 24 21:27:01 SQ2 kernel: ata1: port failed to respond (30 secs)
Jan 24 21:27:01 SQ2 kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 21:27:01 SQ2 kernel: ATA: abnormal status 0xD0 on port 0xFFFFC2000001C01C
Jan 24 21:27:01 SQ2 last message repeated 5 times
Jan 24 21:27:01 SQ2 kernel: ata1.00: qc timeout (cmd 0xec)
Jan 24 21:27:01 SQ2 kernel: ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Jan 24 21:27:01 SQ2 kernel: ata1.00: revalidation failed (errno=-5)
Jan 24 21:27:01 SQ2 kernel: ata1: failed to recover some devices, retrying in 5 secs
Jan 24 21:27:01 SQ2 kernel: ata1: hard resetting port
Jan 24 21:27:01 SQ2 kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 21:27:01 SQ2 kernel: ata1.00: configured for UDMA/133
Jan 24 21:27:01 SQ2 kernel: ata1: EH complete
Jan 24 21:27:01 SQ2 kernel: SCSI device sda: 293046768 512-byte hdwr sectors (150040 MB)
Jan 24 21:27:01 SQ2 kernel: sda: Write Protect is off
Jan 24 21:27:01 SQ2 kernel: SCSI device sda: drive cache: write back
Jan 24 21:28:26 SQ2 kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x40000000 action 0x2 frozen
Jan 24 21:28:26 SQ2 kernel: ata2.00: (BMDMA stat 0x61)
Jan 24 21:28:26 SQ2 kernel: ata2.00: tag 0 cmd 0xca Emask 0x4 stat 0x40 err 0x0 (timeout)
Jan 24 21:28:34 SQ2 kernel: ata2: port is slow to respond, please be patient
Jan 24 21:28:57 SQ2 kernel: ata2: port failed to respond (30 secs)
Jan 24 21:28:57 SQ2 kernel: ata2: soft resetting port
Jan 24 21:29:04 SQ2 kernel: ata2: port is slow to respond, please be patient
Jan 24 21:29:27 SQ2 kernel: ata2: port failed to respond (30 secs)
Jan 24 21:29:27 SQ2 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 21:29:27 SQ2 kernel: ATA: abnormal status 0xD0 on port 0xFFFFC2000001C11C
Jan 24 21:29:27 SQ2 last message repeated 5 times
Jan 24 21:29:57 SQ2 kernel: ata2.00: qc timeout (cmd 0xec)
Jan 24 21:29:57 SQ2 kernel: ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Jan 24 21:29:57 SQ2 kernel: ata2.00: revalidation failed (errno=-5)
Jan 24 21:29:57 SQ2 kernel: ata2: failed to recover some devices, retrying in 5 secs
Jan 24 21:30:02 SQ2 kernel: ata2: hard resetting port
Jan 24 21:30:02 SQ2 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 21:30:02 SQ2 kernel: ata2.00: configured for UDMA/133
Jan 24 21:30:02 SQ2 kernel: ata2: EH complete
Jan 24 21:30:02 SQ2 kernel: SCSI device sdb: 293046768 512-byte hdwr sectors (150040 MB)
Jan 24 21:30:02 SQ2 kernel: sdb: Write Protect is off
Jan 24 21:30:02 SQ2 kernel: SCSI device sdb: drive cache: write back
Jan 24 21:36:13 SQ2 kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x40000000 action 0x2 frozen
Jan 24 21:36:13 SQ2 kernel: ata2.00: (BMDMA stat 0x61)
Jan 24 21:36:13 SQ2 kernel: ata2.00: tag 0 cmd 0xca Emask 0x4 stat 0x40 err 0x0 (timeout)
Jan 24 21:36:20 SQ2 kernel: ata2: port is slow to respond, please be patient
Jan 24 21:36:43 SQ2 kernel: ata2: port failed to respond (30 secs)
Jan 24 21:36:43 SQ2 kernel: ata2: soft resetting port
Jan 24 21:36:51 SQ2 kernel: ata2: port is slow to respond, please be patient
Jan 24 21:37:14 SQ2 kernel: ata2: port failed to respond (30 secs)
Jan 24 21:37:14 SQ2 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 21:37:14 SQ2 kernel: ATA: abnormal status 0xD0 on port 0xFFFFC2000001C11C
Jan 24 21:39:58 SQ2 last message repeated 5 times
Jan 24 21:42:13 SQ2 kernel: ata2.00: qc timeout (cmd 0xec)
Jan 24 21:45:26 SQ2 kernel: ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Jan 24 21:51:18 SQ2 kernel: ata2.00: revalidation failed (errno=-5)
Jan 24 21:53:55 SQ2 kernel: ata2: failed to recover some devices, retrying in 5 secs
Jan 24 21:54:56 SQ2 kernel: ata2: hard resetting port
Jan 24 21:54:57 SQ2 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 21:54:58 SQ2 kernel: ata2.00: configured for UDMA/133
Jan 24 21:54:59 SQ2 kernel: ata2: EH complete
Jan 24 21:54:59 SQ2 kernel: SCSI device sdb: 293046768 512-byte hdwr sectors (150040 MB)
Jan 24 21:54:59 SQ2 kernel: sdb: Write Protect is off
Jan 24 21:54:59 SQ2 kernel: SCSI device sdb: drive cache: write back
Jan 24 21:54:59 SQ2 kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x40000000 action 0x2 frozen
Jan 24 21:55:01 SQ2 kernel: ata2.00: (BMDMA stat 0x61)
Jan 24 21:55:02 SQ2 kernel: ata2.00: tag 0 cmd 0xca Emask 0x4 stat 0x40 err 0x0 (timeout)
Jan 24 21:55:04 SQ2 kernel: ata2: port is slow to respond, please be patient
Jan 24 21:55:05 SQ2 kernel: ata2: port failed to respond (30 secs)
Jan 24 21:55:06 SQ2 kernel: ata2: soft resetting port
Jan 24 21:55:07 SQ2 kernel: ata2: port is slow to respond, please be patient
Jan 24 21:55:08 SQ2 kernel: ata2: port failed to respond (30 secs)
Jan 24 21:55:09 SQ2 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 21:55:09 SQ2 kernel: ATA: abnormal status 0xD0 on port 0xFFFFC2000001C11C
Jan 24 21:55:09 SQ2 last message repeated 5 times
Jan 24 21:55:09 SQ2 kernel: ata2.00: qc timeout (cmd 0xec)
Jan 24 21:55:09 SQ2 kernel: ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Jan 24 21:55:09 SQ2 kernel: ata2.00: revalidation failed (errno=-5)
Jan 24 21:55:09 SQ2 kernel: ata2: failed to recover some devices, retrying in 5 secs
Jan 24 21:55:09 SQ2 kernel: ata2: hard resetting port
Jan 24 21:55:09 SQ2 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 21:55:09 SQ2 kernel: ata2.00: configured for UDMA/133
Jan 24 21:55:09 SQ2 kernel: ata2: EH complete
Jan 24 21:55:09 SQ2 kernel: SCSI device sdb: 293046768 512-byte hdwr sectors (150040 MB)
Jan 24 21:55:09 SQ2 kernel: sdb: Write Protect is off
Jan 24 21:55:09 SQ2 kernel: SCSI device sdb: drive cache: write back
Jan 24 21:55:09 SQ2 kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x40000000 action 0x2 frozen
Jan 24 21:55:09 SQ2 kernel: ata2.00: (BMDMA stat 0x61)
Jan 24 21:55:09 SQ2 kernel: ata2.00: tag 0 cmd 0xca Emask 0x4 stat 0x40 err 0x0 (timeout)
Jan 24 21:55:09 SQ2 kernel: ata2: port is slow to respond, please be patient
Jan 24 21:55:09 SQ2 kernel: ata2: port failed to respond (30 secs)
Jan 24 21:55:09 SQ2 kernel: ata2: soft resetting port
Jan 24 21:55:09 SQ2 kernel: ata2: port is slow to respond, please be patient
Jan 24 21:55:09 SQ2 kernel: ata2: port failed to respond (30 secs)
Jan 24 21:55:09 SQ2 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 21:55:09 SQ2 kernel: ATA: abnormal status 0xD0 on port 0xFFFFC2000001C11C
Jan 24 21:55:09 SQ2 last message repeated 5 times
Jan 24 21:55:09 SQ2 kernel: ata2.00: qc timeout (cmd 0xec)
Jan 24 21:55:09 SQ2 kernel: ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Jan 24 21:55:09 SQ2 kernel: ata2.00: revalidation failed (errno=-5)
Jan 24 21:55:09 SQ2 kernel: ata2: failed to recover some devices, retrying in 5 secs
Jan 24 21:55:09 SQ2 kernel: ata2: hard resetting port
Jan 24 21:55:09 SQ2 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 21:55:09 SQ2 kernel: ata2.00: configured for UDMA/133
Jan 24 21:55:09 SQ2 kernel: ata2: EH complete
Jan 24 21:55:09 SQ2 kernel: SCSI device sdb: 293046768 512-byte hdwr sectors (150040 MB)
Jan 24 21:55:09 SQ2 kernel: sdb: Write Protect is off
Jan 24 21:55:09 SQ2 kernel: SCSI device sdb: drive cache: write back
Jan 24 21:55:09 SQ2 kernel: ata2.00: limiting speed to UDMA/100
Jan 24 21:55:09 SQ2 kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x40000000 action 0x2 frozen
Jan 24 21:55:09 SQ2 kernel: ata2.00: (BMDMA stat 0x61)
Jan 24 21:55:09 SQ2 kernel: ata2.00: tag 0 cmd 0xca Emask 0x4 stat 0x40 err 0x0 (timeout)
Jan 24 21:55:09 SQ2 kernel: ata2: port is slow to respond, please be patient
Jan 24 21:55:09 SQ2 kernel: ata2: port failed to respond (30 secs)
Jan 24 21:55:09 SQ2 kernel: ata2: soft resetting port
Jan 24 21:55:09 SQ2 kernel: ata2: port is slow to respond, please be patient
Jan 24 21:55:09 SQ2 kernel: ata2: port failed to respond (30 secs)
Jan 24 21:55:09 SQ2 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 21:55:09 SQ2 kernel: ATA: abnormal status 0xD0 on port 0xFFFFC2000001C11C
Jan 24 21:55:09 SQ2 last message repeated 5 times
Jan 24 21:55:09 SQ2 kernel: ata2.00: qc timeout (cmd 0xec)
Jan 24 21:55:09 SQ2 kernel: ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Jan 24 21:55:09 SQ2 kernel: ata2.00: revalidation failed (errno=-5)
Jan 24 21:55:09 SQ2 kernel: ata2: failed to recover some devices, retrying in 5 secs
Jan 24 21:55:09 SQ2 kernel: ata2: hard resetting port
Jan 24 21:55:09 SQ2 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 21:55:09 SQ2 kernel: ata2.00: configured for UDMA/100
Jan 24 21:55:09 SQ2 kernel: ata2: EH complete
Jan 24 21:55:09 SQ2 kernel: SCSI device sdb: 293046768 512-byte hdwr sectors (150040 MB)
Jan 24 21:55:09 SQ2 kernel: sdb: Write Protect is off
Jan 24 21:55:09 SQ2 kernel: SCSI device sdb: drive cache: write back
Jan 24 22:38:09 SQ2 kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x40000000 action 0x2 frozen
Jan 24 22:38:09 SQ2 kernel: ata2.00: (BMDMA stat 0x61)
Jan 24 22:38:09 SQ2 kernel: ata2.00: tag 0 cmd 0xca Emask 0x4 stat 0x40 err 0x0 (timeout)
Jan 24 22:38:16 SQ2 kernel: ata2: port is slow to respond, please be patient
Jan 24 22:38:39 SQ2 kernel: ata2: port failed to respond (30 secs)
Jan 24 22:38:39 SQ2 kernel: ata2: soft resetting port
Jan 24 22:38:46 SQ2 kernel: ata2: port is slow to respond, please be patient
Jan 24 22:39:09 SQ2 kernel: ata2: port failed to respond (30 secs)
Jan 24 22:39:09 SQ2 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 22:39:10 SQ2 kernel: ATA: abnormal status 0xD0 on port 0xFFFFC2000001C11C
Jan 24 22:44:52 SQ2 last message repeated 5 times
Jan 24 22:46:15 SQ2 kernel: ata2.00: qc timeout (cmd 0xec)
Jan 24 22:46:16 SQ2 kernel: ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Jan 24 22:46:17 SQ2 kernel: ata2.00: revalidation failed (errno=-5)
Jan 24 22:46:17 SQ2 kernel: ata2: failed to recover some devices, retrying in 5 secs
Jan 24 22:46:18 SQ2 kernel: ata2: hard resetting port
Jan 24 22:46:18 SQ2 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 22:46:19 SQ2 kernel: ata2.00: configured for UDMA/100
Jan 24 22:46:20 SQ2 kernel: ata2: EH complete
Jan 24 22:46:20 SQ2 kernel: SCSI device sdb: 293046768 512-byte hdwr sectors (150040 MB)
Jan 24 22:46:20 SQ2 kernel: sdb: Write Protect is off
Jan 24 22:46:20 SQ2 kernel: SCSI device sdb: drive cache: write back
Jan 24 22:46:20 SQ2 kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x40000000 action 0x2 frozen
Jan 24 22:46:21 SQ2 kernel: ata2.00: (BMDMA stat 0x61)
Jan 24 22:46:22 SQ2 kernel: ata2.00: tag 0 cmd 0xca Emask 0x4 stat 0x40 err 0x0 (timeout)
Jan 24 22:46:22 SQ2 kernel: ata2: port is slow to respond, please be patient
Jan 24 22:46:23 SQ2 kernel: ata2: port failed to respond (30 secs)
Jan 24 22:46:23 SQ2 kernel: ata2: soft resetting port
Jan 24 22:46:27 SQ2 kernel: ata2: port is slow to respond, please be patient
Jan 24 22:46:50 SQ2 kernel: ata2: port failed to respond (30 secs)
Jan 24 22:46:50 SQ2 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 22:46:50 SQ2 kernel: ATA: abnormal status 0xD0 on port 0xFFFFC2000001C11C
Jan 24 22:46:50 SQ2 last message repeated 5 times
Jan 24 22:47:20 SQ2 kernel: ata2.00: qc timeout (cmd 0xec)
Jan 24 22:47:20 SQ2 kernel: ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Jan 24 22:47:20 SQ2 kernel: ata2.00: revalidation failed (errno=-5)
Jan 24 22:47:20 SQ2 kernel: ata2: failed to recover some devices, retrying in 5 secs
Jan 24 22:47:25 SQ2 kernel: ata2: hard resetting port
Jan 24 22:47:25 SQ2 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 22:47:25 SQ2 kernel: ata2.00: configured for UDMA/100
Jan 24 22:47:25 SQ2 kernel: ata2: EH complete
Jan 24 22:47:25 SQ2 kernel: SCSI device sdb: 293046768 512-byte hdwr sectors (150040 MB)
Jan 24 22:47:25 SQ2 kernel: sdb: Write Protect is off
Jan 24 22:47:25 SQ2 kernel: SCSI device sdb: drive cache: write back
Jan 24 22:57:37 SQ2 kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x40000000 action 0x2 frozen
Jan 24 22:57:37 SQ2 kernel: ata2.00: (BMDMA stat 0x61)
Jan 24 22:57:37 SQ2 kernel: ata2.00: tag 0 cmd 0xca Emask 0x4 stat 0x40 err 0x0 (timeout)
Jan 24 22:57:44 SQ2 kernel: ata2: port is slow to respond, please be patient
Jan 24 22:58:07 SQ2 kernel: ata2: port failed to respond (30 secs)
Jan 24 22:58:07 SQ2 kernel: ata2: soft resetting port
Jan 24 22:58:15 SQ2 kernel: ata2: port is slow to respond, please be patient
Jan 24 22:58:38 SQ2 kernel: ata2: port failed to respond (30 secs)
Jan 24 22:58:38 SQ2 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 22:58:38 SQ2 kernel: ATA: abnormal status 0xD0 on port 0xFFFFC2000001C11C
Jan 24 22:58:38 SQ2 last message repeated 5 times
Jan 24 22:59:25 SQ2 kernel: ata2.00: qc timeout (cmd 0xec)
Jan 24 23:02:36 SQ2 kernel: ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Jan 24 23:07:03 SQ2 kernel: ata2.00: revalidation failed (errno=-5)
Jan 24 23:11:04 SQ2 kernel: ata2: failed to recover some devices, retrying in 5 secs
Jan 24 23:13:20 SQ2 kernel: ata2: hard resetting port
Jan 24 23:13:20 SQ2 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 23:13:20 SQ2 kernel: ata2.00: configured for UDMA/100
Jan 24 23:13:20 SQ2 kernel: ata2: EH complete
Jan 24 23:13:20 SQ2 kernel: SCSI device sdb: 293046768 512-byte hdwr sectors (150040 MB)
Jan 24 23:13:20 SQ2 kernel: sdb: Write Protect is off
Jan 24 23:13:20 SQ2 kernel: SCSI device sdb: drive cache: write back
Jan 24 23:13:20 SQ2 kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x40000000 action 0x2 frozen
Jan 24 23:13:20 SQ2 kernel: ata2.00: (BMDMA stat 0x61)
Jan 24 23:13:20 SQ2 kernel: ata2.00: tag 0 cmd 0xca Emask 0x4 stat 0x40 err 0x0 (timeout)
Jan 24 23:13:20 SQ2 kernel: ata2: port is slow to respond, please be patient
Jan 24 23:13:20 SQ2 kernel: ata2: port failed to respond (30 secs)
Jan 24 23:13:20 SQ2 kernel: ata2: soft resetting port
Jan 24 23:13:20 SQ2 kernel: ata2: port is slow to respond, please be patient
Jan 24 23:13:20 SQ2 kernel: ata2: port failed to respond (30 secs)
Jan 24 23:13:20 SQ2 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 23:13:20 SQ2 kernel: ATA: abnormal status 0xD0 on port 0xFFFFC2000001C11C
Jan 24 23:13:20 SQ2 last message repeated 5 times
.
.
.