System
-----------------------
K3b Version: 0.12.17

KDE Version: 3.5.4
QT Version:  3.3.7
Kernel:      2.4.33.3
Devices
-----------------------
LITE-ON LTR-48247S PPB2 (/dev/hdd, ) at /mnt/cdrom [CD-R; CD-RW; CD-ROM] [CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R]

HL-DT-ST DVD-ROM GDR8162B 0019 (/dev/hdc, ) at  [CD-ROM; DVD-ROM] [DVD-ROM; CD-ROM] [None]
Used versions
-----------------------
cdrdao: 1.2.1

cdrdao
-----------------------
Cdrdao version 1.2.1 - (C) Andreas Mueller <andreas@daneb.de>
  SCSI interface library - (C) Joerg Schilling
  Paranoia DAE library - (C) Monty
Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables.
ERROR: Cannot open SCSI device 'ATAPI:/dev/hdd': Cannot open '/dev/hdd'
Transport name:  sg
Transport descr.: Generic transport independent SCSI
Transp. layer ind.: 
Target specifier: bus,target,lun
Target example:  1,2,0
SCSI Bus scanning: supported
Open via UNIX device: not supported
Transport name:  pg
Transport descr.: SCSI transport for ATAPI over Parallel Port
Transp. layer ind.: 
Target specifier: bus,target,lun
Target example:  1,2,0
SCSI Bus scanning: supported
Open via UNIX device: not supported
Transport name:  ATA
Transport descr.: ATA Packet specific SCSI transport
Transp. layer ind.: ATAPI:
Target specifier: bus,target,lun
Target example:  ATAPI:1,2,0
SCSI Bus scanning: supported
Open via UNIX device: not supported
Transport name:  ATA
Transport descr.: ATA Packet specific SCSI transport using sg interface
Transp. layer ind.: ATA:
Target specifier: bus,target,lun
Target example:  1,2,0
SCSI Bus scanning: supported
Open via UNIX device: not supported
ERROR: Please use option '--device [proto:]bus,id,lun', e.g. --device 0,6,0 or --device ATA:0,0,0
ERROR: Cannot setup device ATAPI:/dev/hdd.

cdrdao command:
-----------------------
/usr/bin/cdrdao write --device ATAPI:/dev/hdd --driver generic-mmc:0x00000010 --speed 24 -n -v 2 --force --eject --remote 35 /home/epoch/Desktop/bang/k3b_audio_0_.toc