[root@localhost /]# dmesg Linux version 2.6.9-1.6_FC2 (bhcompile@bugs.build.redhat.com) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 Thu Nov 18 22:03:19 EST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000001ffd000 (usable) BIOS-e820: 0000000001ffd000 - 0000000001fff000 (ACPI data) BIOS-e820: 0000000001fff000 - 0000000002000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 31MB LOWMEM available. zapping low mappings. On node 0 totalpages: 8189 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 4093 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1 DMI 2.0 present. ACPI: RSDP (v000 ASUS ) @ 0x000f7f30 ACPI: RSDT (v001 ASUS P2Z-B 0x58582e31 ASUS 0x31303030) @ 0x01ffd000 ACPI: FADT (v001 ASUS P2Z-B 0x58582e31 ASUS 0x31303030) @ 0x01ffd080 ACPI: BOOT (v001 ASUS P2Z-B 0x58582e31 ASUS 0x31303030) @ 0x01ffd040 ACPI: DSDT (v001 ASUS P2Z-B 0x00001000 MSFT 0x01000001) @ 0x00000000 ACPI: BIOS age (1999) fails cutoff (2001), acpi=force is required to enable ACPIACPI: Disabling ACPI support Built 1 zonelists Kernel command line: ro root=LABEL=/ mapped 4G/4G trampoline to ffff4000. Initializing CPU#0 CPU 0 irqstacks, hard=023e4000 soft=023e3000 PID hash table entries: 1024 (order: 10, 16384 bytes) Detected 334.191 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 28484k/32756k available (2092k kernel code, 3840k reserved, 679k data, 148k init, 0k highmem) Calibrating delay loop... 657.40 BogoMIPS (lpj=328704) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0183f9ff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K CPU: After all inits, caps: 0183f1ff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel Celeron (Mendocino) stepping 00 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 203k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf0720, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:04.0 PCI: IRQ 0 for device 0000:00:04.2 doesn't match PIRQ mask - try pci=usepirqmaskSimple Boot Flag at 0x46 set to 0x1 apm: BIOS version 1.2 Flags 0x0b (Driver version 1.16ac) audit: initializing netlink socket (disabled) audit(1104048018.4294966362:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 5501D0A55CA2BC19 - User ID: Red Hat, Inc. (Kernel Module GPG key) Limiting direct PCI/PCI transfers. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 vesafb: probe of vesafb0 failed with error -6 isapnp: Scanning for PnP cards... isapnp: Card '3Com 3C509B EtherLink III' isapnp: Card '3Com 3C509B EtherLink III' isapnp: 2 Plug & Play cards detected total Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 440BX Chipset. agpgart: Maximum main memory to use for agp memory: 3M agpgart: AGP aperture is 64M @ 0xe4000000 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 0000:00:04.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: ST34311A, ATA DISK drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! hda: max request size: 128KiB hda: 8452080 sectors (4327 MB) w/256KiB Cache, CHS=8944/15/63, UDMA(33) hda: cache flushes not supported hda: hda1 hda2 hda3 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 128 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 585) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: hda2: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 296813 EXT3-fs: hda2: 1 orphan inode deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 148k freed SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks USB Universal Host Controller Interface driver v2.2 PCI: IRQ 0 for device 0000:00:04.2 doesn't match PIRQ mask - try pci=usepirqmaskPCI: Assigned IRQ 10 for device 0000:00:04.2 uhci_hcd 0000:00:04.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:04.2 to 64 uhci_hcd 0000:00:04.2: irq 10, io base 0000d400 uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected EXT3 FS on hda2, internal journal device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com Adding 192772k swap on /dev/hda3. Priority:-1 extents:1 kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. IA-32 Microcode Update Driver: v1.14 microcode: CPU0 updated from revision 0x4 to 0xa, date = 05051999 parport0: PC-style at 0x378 [PCSPP,TRISTATE] SCSI subsystem initialized inserting floppy driver for 2.6.9-1.6_FC2 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker http://www.scyld.com/network/ne2k-pci.html PCI: Found IRQ 12 for device 0000:00:0b.0 divert: allocating divert_blk for eth0 eth0: RealTek RTL-8029 found at 0xb800, IRQ 12, 00:00:E8:8E:F0:C8. Linux Tulip driver version 1.1.13 (May 11, 2002) PCI: Found IRQ 5 for device 0000:00:0a.0 PCI: Setting latency timer of device 0000:00:0a.0 to 64 tulip0: MII transceiver #1 config 3100 status 7869 advertising 05e1. divert: allocating divert_blk for eth1 eth1: ADMtek Comet rev 17 at 0x481c000, 00:08:A1:55:B4:EF, IRQ 5. divert: freeing divert_blk for eth0 divert: freeing divert_blk for eth1 ip_tables: (C) 2000-2002 Netfilter core team ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker http://www.scyld.com/network/ne2k-pci.html PCI: Found IRQ 12 for device 0000:00:0b.0 divert: allocating divert_blk for eth0 eth0: RealTek RTL-8029 found at 0xb800, IRQ 12, 00:00:E8:8E:F0:C8. ip_tables: (C) 2000-2002 Netfilter core team Linux Tulip driver version 1.1.13 (May 11, 2002) PCI: Found IRQ 5 for device 0000:00:0a.0 tulip0: MII transceiver #1 config 1000 status 786d advertising 05e1. divert: allocating divert_blk for eth1 eth1: ADMtek Comet rev 17 at 0x481c000, 00:08:A1:55:B4:EF, IRQ 5. ip_tables: (C) 2000-2002 Netfilter core team eth1: Setting full-duplex based on MII#1 link partner capability of 45e1. NET: Registered protocol family 10 Disabled Privacy Extensions on device 02376c20(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 eth1: no IPv6 routers present eth0: no IPv6 routers present pnp: Device 00:01.00 activated. divert: allocating divert_blk for eth2 eth2: 3c5x9 found at 0x220, 10baseT port, address 00 60 97 22 4e 33, IRQ 11. 3c509.c:1.19b 08Nov2002 becker@scyld.com http://www.scyld.com/network/3c509.html pnp: Device 00:02.00 activated. divert: allocating divert_blk for eth3 eth3: 3c5x9 found at 0x230, 10baseT port, address 00 60 97 21 8c a0, IRQ 15. 3c509.c:1.19b 08Nov2002 becker@scyld.com http://www.scyld.com/network/3c509.html