Linux version 2.6.13.2-chw-3 (root@dev.mysettopbox.tv) (gcc version 3.3.6 (Debi\
an 1:3.3.6-5)) #1 SMP Wed Sep 21 08:15:54 PDT 2005 
BIOS-provided physical RAM map: 
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) 
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) 
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) 
 BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) 
 BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data) 
 BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS) 
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 
0MB HIGHMEM available. 
255MB LOWMEM available. 
On node 0 totalpages: 65520 
  DMA zone: 4096 pages, LIFO batch:1 
  Normal zone: 61424 pages, LIFO batch:31 
  HighMem zone: 0 pages, LIFO batch:1 
DMI 2.3 present. 
ACPI: RSDP (v000 AMI                                   ) @ 0x000fc610 
ACPI: RSDT (v001 AMIINT          0x00000010 MSFT 0x00000097) @ 0x0fff0000 
ACPI: FADT (v001 AMIINT          0x00000010 MSFT 0x00000097) @ 0x0fff0030 
ACPI: DSDT (v001    VIA APOLLO-P 0x00001000 MSFT 0x0100000b) @ 0x00000000 
ACPI: PM-Timer IO Port: 0x808 
Allocating PCI resources starting at 10000000 (gap: 10000000:efff0000) 
Built 1 zonelists 
Kernel command line: auto BOOT_IMAGE=Linux ro root=301 splash=silent apm=power-\
off nomce 
bootsplash: silent mode. 
Local APIC disabled by BIOS -- you can enable it with "lapic" 
mapped APIC to ffffd000 (01282000) 
Initializing CPU#0 
PID hash table entries: 1024 (order: 10, 16384 bytes) 
Detected 1002.390 MHz processor. 
Using pmtmr for high-res timesource 
Console: colour VGA+ 80x25 
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) 
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) 
Memory: 253652k/262080k available (3064k kernel code, 7864k reserved, 1213k dat\
a, 216k init, 0k highmem) 
Checking if this processor honours the WP bit even in supervisor mode... Ok. 
Calibrating delay using timer specific routine.. 2007.02 BogoMIPS (lpj=4014046) 
Security Framework v1.0.0 initialized 
Mount-cache hash table entries: 512 
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000\
 00000000 00000000 
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 \
00000000 00000000 
CPU: L1 I cache: 16K, L1 D cache: 16K 
CPU: L2 cache: 128K 
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 000000\
00 00000000 
mtrr: v2.0 (20020519) 
Enabling fast FPU save and restore... done. 
Enabling unmasked SIMD FPU exception support... done. 
Checking 'hlt' instruction... OK. 
ACPI: setting ELCR to 0020 (from 0e00) 
CPU0: Intel Celeron (Coppermine) stepping 0a 
SMP motherboard not detected. 
Local APIC not detected. Using dummy APIC emulation. 
Brought up 1 CPUs 
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd 
Freeing initrd memory: 68k freed 
NET: Registered protocol family 16 
ACPI: bus type pci registered 
PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1 
PCI: Using configuration type 1 
ACPI: Subsystem revision 20050408 
ACPI: Interpreter enabled 
ACPI: Using PIC for interrupt routing 
ACPI: PCI Root Bridge [PCI0] (0000:00) 
PCI: Probing PCI hardware (bus 00) 
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 
Boot video device is 0000:01:00.0 
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] 
ACPI: Power Resource [URP1] (off) 
ACPI: Power Resource [URP2] (off) 
ACPI: Power Resource [FDDP] (off) 
ACPI: Power Resource [LPTP] (off) 
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) 
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. 
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) 
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) 
Linux Plug and Play Support v0.97 (c) Adam Belay 
pnp: PnP ACPI init 
pnp: PnP ACPI: found 10 devices 
PnPBIOS: Disabled by ACPI PNP 
SCSI subsystem initialized 
PCI: Using ACPI for IRQ routing 
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report 
PCI: Bridge: 0000:00:01.0 
  IO window: 9000-9fff 
  MEM window: dde00000-dfefffff 
  PREFETCH window: c5c00000-d5cfffff 
PCI: Setting latency timer of device 0000:00:01.0 to 64 
Total HugeTLB memory allocated, 0 
VFS: Disk quotas dquot_6.5.1 
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) 
JFS: nTxBlock = 1983, nTxLock = 15868 
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug\
 enabled 
SGI XFS Quota Management subsystem 
Initializing Cryptographic API 
PCI: Disabling Via external APIC routing 
isapnp: Scanning for PnP cards... 
isapnp: Card 'U.S. Robotics x2 Winmodem Fax' 
isapnp: 1 Plug & Play card detected total 
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 
serio: i8042 AUX port at 0x60,0x64 irq 12 
serio: i8042 KBD port at 0x60,0x64 irq 1 
io scheduler noop registered 
io scheduler anticipatory registered 
io scheduler deadline registered 
io scheduler cfq registered 
Floppy drive(s): fd0 is 1.44M 
FDC 0 is a post-1991 82077 
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize 
loop: loaded (max 8 devices) 
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx 
VP_IDE: IDE controller at PCI slot 0000:00:07.1 
PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0 
VP_IDE: chipset revision 6 
VP_IDE: not 100% native mode: will probe irqs later 
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1 
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio 
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA 
Probing IDE interface ide0... 
hda: WDC WD800JB-00JJC0, ATA DISK drive 
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 
Probing IDE interface ide1... 
hdc: CRD-8240B, ATAPI CD/DVD-ROM drive 
hdd: CD-R/RW RW7080A, ATAPI CD/DVD-ROM drive 
ide1 at 0x170-0x177,0x376 on irq 15 
hda: max request size: 128KiB 
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100) 
hda: cache flushes supported 
 hda: hda1 hda2 hda3 hda4 
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA 
Uniform CD-ROM driver Revision: 3.20 
hdd: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache, DMA 
libata version 1.12 loaded. 
mice: PS/2 mouse device common for all mice 
md: linear personality registered as nr 1 
md: raid0 personality registered as nr 2 
md: raid1 personality registered as nr 3 
md: raid10 personality registered as nr 9 
md: raid5 personality registered as nr 4 
raid5: automatically using best checksumming function: pIII_sse 
   pIII_sse  :  1956.000 MB/sec 
raid5: using function: pIII_sse (1956.000 MB/sec) 
raid6: int32x1    321 MB/s 
raid6: int32x2    411 MB/s 
raid6: int32x4    272 MB/s 
raid6: int32x8    263 MB/s 
raid6: mmxx1      963 MB/s 
raid6: mmxx2     1210 MB/s 
raid6: sse1x1     883 MB/s 
raid6: sse1x2    1037 MB/s 
raid6: using algorithm sse1x2 (1037 MB/s) 
md: raid6 personality registered as nr 8 
md: multipath personality registered as nr 7 
md: faulty personality registered as nr 10 
md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27 
md: bitmap version 3.38 
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com 
NET: Registered protocol family 2 
input: AT Translated Set 2 keyboard on isa0060/serio0 
IP route cache hash table entries: 4096 (order: 2, 16384 bytes) 
TCP established hash table entries: 16384 (order: 6, 262144 bytes) 
TCP bind hash table entries: 16384 (order: 5, 196608 bytes) 
TCP: Hash tables configured (established 16384 bind 16384) 
TCP reno registered 
TCP bic registered 
NET: Registered protocol family 1 
NET: Registered protocol family 15 
Using IPI Shortcut mode 
Suspend2 Core. 
Suspend2 Compression Driver loading. 
Suspend2 Encryption Driver loading. 
Suspend2 Swap Writer loading. 
Suspend2 FileWriter loading. 
md: Autodetecting RAID arrays. 
md: autorun ... 
md: ... autorun DONE. 
RAMDISK: Compressed image found at block 0 
VFS: Mounted root (ext2 filesystem). 
Suspend2: Initrd lacks echo > /proc/software_suspend/do_resume. 
EXT3-fs: mounted filesystem with ordered data mode. 
VFS: Mounted root (ext3 filesystem) readonly. 
Trying to move old root to /initrd ... <6>kjournald starting.  Commit interval \
5 seconds 
okay 
Freeing unused kernel memory: 216k freed 
logips2pp: Detected unknown logitech mouse model 79 
input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1 
ts: Compaq touchscreen protocol output 
Suspend2 2.2-rc7: You need to use a resume2= command line parameter to tell Sus\
pend2 where to look for an image. 
Suspend2 2.2-rc7: Resume2 parameter is empty. Suspending will be disabled. 
Suspend2 2.2-rc7: Missing or invalid storage location (resume2= parameter). Ple\
ase correct and rerun lilo (or equivalent) before suspending. 
Adding 879472k swap on /dev/hda2.  Priority:-1 extents:1 
EXT3 FS on hda1, internal journal 
usbcore: registered new driver usbfs 
usbcore: registered new driver hub 
USB Universal Host Controller Interface driver v2.3 
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 
PCI: setting IRQ 9 as level-triggered 
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ\
 9 
uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller 
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 
uhci_hcd 0000:00:07.2: irq 9, io base 0x0000cc00 
hub 1-0:1.0: USB hub found 
hub 1-0:1.0: 2 ports detected 
ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ\
 9 
uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller\
 (#2) 
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2 
uhci_hcd 0000:00:07.3: irq 9, io base 0x0000d000 
hub 2-0:1.0: USB hub found 
hub 2-0:1.0: 2 ports detected 
usb 1-1: new full speed USB device using uhci_hcd and address 2 
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) 
Initializing USB Mass Storage driver... 
usbcore: registered new driver usb-storage 
USB Mass Storage support registered. 
ieee1394: Initialized config rom entry `ip1394' 
/root/at76c503a/at76_usbdfu.c: USB Device Firmware Upgrade (DFU) handler v0.12b\
eta23-static loading 
/root/at76c503a/at76c503.c: Generic Atmel at76c503/at76c505 routines v0.12beta2\
3-static 
/root/at76c503a/at76c503-fw_skel.c: Atmel at76c503 (RFMD) Wireless LAN Driver v\
0.12beta23-static loading 
/root/at76c503a/at76c503-fw_skel.c: using compiled-in firmware 
usbcore: registered new driver at76c503-rfmd 
Real Time Clock Driver v1.12 
ACPI: Power Button (FF) [PWRF] 
ACPI: Power Button (CM) [PWRB] 
ACPI: Sleep Button (CM) [SLPB] 
ACPI: CPU0 (power states: C1[C1]) 
ACPI: Processor [CPU1] (supports 16 throttling states) 
ACPI: Thermal Zone [THRM] (30 C) 
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled 
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 
parport_pc: VIA 686A/8231 detected 
parport_pc: probing current configuration 
parport_pc: Current parallel port base: 0x378 
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,E\
CP] 
parport_pc: VIA parallel port: io=0x378, irq=7 
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 
PCI: setting IRQ 11 as level-triggered 
ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IR\
Q 11 
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 
0000:00:0c.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xc800. Vers LK1.1.19 
Linux video capture interface: v1.00 
usb 1-1: reset full speed USB device using uhci_hcd and address 2 
usb 1-1: device firmware changed 
usb 1-1: USB disconnect, address 2 
/root/at76c503a/at76c503-fw_skel.c: wlan%d disconnecting 
/root/at76c503a/at76c503-fw_skel.c: at76c503-rfmd disconnected 
usb 1-1: new full speed USB device using uhci_hcd and address 3 
/root/at76c503a/at76c503-fw_skel.c: using compiled-in firmware 
/root/at76c503a/at76c503.c: $Id: at76c503.c,v 1.74 2005/03/08 01:33:14 jal2 Exp\
 $ compiled Dec 19 2005 15:33:42 
/root/at76c503a/at76c503.c: firmware version 1.101.4 #84 (fcs_len 4) 
/root/at76c503a/at76c503.c: device's MAC 00:06:25:1e:7e:fe, regulatory domain F\
CC (U.S) (id 16) 
/root/at76c503a/at76c503.c: registered wlan0 
ivtv:  ==================== START INIT IVTV ==================== 
ivtv:  version 0.4.0 (tagged release) loading 
ivtv:  Linux version: 2.6.13.2-chw-3 SMP preempt 586 gcc-3.3 
ivtv:  In case of problems please include the debug info 
ivtv:  between the START INIT IVTV and END INIT IVTV lines when 
ivtv:  mailing the ivtv-devel mailinglist. 
ivtv0: Autodetected WinTV PVR 150 card (iTVC16 based) 
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 
PCI: setting IRQ 10 as level-triggered 
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IR\
Q 10 
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] 
tveeprom: ivtv version 
tveeprom: Hauppauge: model = 26032, rev = C199, serial# = 8233327 
tveeprom: tuner = TCL 2002N 5H (idx = 99, type = 50) 
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) 
tveeprom: audio processor = CX25841 (type = 23) 
tveeprom: decoder processor = CX25841 (type = 1c) 
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] 
cx25840 0-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0) 
i2c_adapter i2c-0: sendbytes: error - bailout. 
cx25840 0-0044: 333MHz i2c firmware load failed 
cx25840 0-0044: firmware /lib/modules/HcwMakoA.ROM load failed 
ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] 
wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) 
ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] 
ivtv0: loading /lib/modules/ivtv-fw-enc.bin 
ivtv0: Encoder revision: 0x02040011 
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) 
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) 
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) 
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) 
tuner: type set to 50 (TCL 2002N) by ivtv i2c driver #0 
ivtv0: Initialized WinTV PVR 150, card #0 
ivtv:  ====================  END INIT IVTV  ==================== 
Linux agpgart interface v0.101 (c) Dave Jones 
ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IR\
Q 10 
PCI: Setting latency timer of device 0000:00:07.5 to 64 
NET: Registered protocol family 17 
bttv: driver version 0.9.16 loaded 
bttv: using 8 buffers with 2080k (520 pages) each for capture 
bt878: AUDIO driver version 0.0.0 loaded 
saa7146: register extension 'dvb'. 
saa7146: register extension 'budget dvb'. 
saa7146: register extension 'budget_ci dvb'. 
saa7146: register extension 'budget_av'. 
usbcore: registered new driver ttusb 
usbcore: registered new driver ttusb-dec 
NET: Registered protocol family 10 
Disabled Privacy Extensions on device c04d8ba0(lo) 
IPv6 over IPv4 tunneling driver 
cdrom: open failed. 
XFS mounting filesystem hda3 
Ending clean XFS mount for filesystem: hda3 
XFS mounting filesystem dm-0 
Ending clean XFS mount for filesystem: dm-0 
Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon\
!