[4294696.153000] Linux video capture interface: v1.00 [4294696.209000] cx2388x v4l2 driver version 0.0.4 loaded [4294696.212000] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [4294696.212000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 [4294696.212000] cx88[0]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18,autodetected] [4294696.372000] cx88[0]: hauppauge eeprom: model=90002, tuner=76 [4294696.400000] cx88[0]: registered IR remote control [4294696.400000] cx88[0]/0: found at 0000:02:08.0, rev: 5, irq: 18, latency: 32, mmio: 0xd0000000 [4294696.422000] cx88[0]/0: registered device video0 [v4l2] [4294696.431000] cx88[0]/0: registered device vbi0 [4294696.591000] cx2388x dvb driver version 0.0.4 loaded [4294696.594000] ACPI: PCI Interrupt 0000:02:08.2[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 [4294696.594000] cx88[0]/2: found at 0000:02:08.2, rev: 5, irq: 18, latency: 32, mmio: 0xd1000000 [4294696.594000] cx88[0]/2: cx2388x based dvb card [4294696.596000] DVB: registering new adapter (cx88[0]). [4294696.596000] DVB: registering frontend 0 (Hauppauge Nova-T DVB-T)... [4294696.672000] cx2388x blackbird driver version 0.0.4 loaded [4294696.932000] ivtv: ==================== START INIT IVTV ==================== [4294696.932000] ivtv: version 0.4.0 (tagged release) loading [4294696.932000] ivtv: Linux version: 2.6.12-9-386 386 gcc-3.4 [4294696.932000] ivtv: In case of problems please include the debug info [4294696.932000] ivtv: between the START INIT IVTV and END INIT IVTV lines when [4294696.932000] ivtv: mailing the ivtv-devel mailinglist. [4294696.935000] ivtv0: Autodetected WinTV PVR 350 card (iTVC15 based) [4294696.936000] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [4294696.936000] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19 [4294696.936000] ivtv0: Unreasonably low latency timer, setting to 64 (was 32) [4294696.940000] ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] [4294696.945000] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 [4294696.945000] ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] [4294696.984000] msp34xx: ivtv version [4294696.984000] msp34xx: init: chip=MSP3418W-B3, has NICAM support, simple (D) mode, simpler (G) no-thread mode [4294696.984000] msp34xx: $Id$ compiled on: Dec 1 2005 22:00:01 [4294697.318000] ivtv0: i2c attach to card #0 ok [client=MSP3418W-B3, addr=40] [4294697.321000] saa7115 3-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) [4294697.492000] ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] [4294697.551000] saa7127 3-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) [4294697.553000] ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44] [4294697.617000] tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 2962152 [4294697.617000] tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38) [4294697.617000] tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) [4294697.617000] tveeprom: audio_processor = CS5331 (type = 9) [4294697.653000] tda9885/6/7: (ivtv) chip found @ 0x86 [4294697.653000] ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] [4294698.266000] ivtv0: loading /lib/modules/ivtv-fw-enc.bin [4294698.282000] ivtv0: loading /lib/modules/ivtv-fw-dec.bin [4294698.503000] ivtv0: Encoder revision: 0x02050032 [4294698.513000] ivtv0: Decoder revision: 0x02020023 [4294698.514000] ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) [4294698.515000] ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) [4294698.516000] ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) [4294698.517000] ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) [4294698.518000] ivtv0: Create encoder radio stream [4294698.519000] ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total) [4294698.520000] ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total) [4294698.522000] ivtv0: Create decoder VOUT stream [4294698.596000] ivtv0: Allocate DMA decoder YUV stream: 20 x 51840 buffers (1024KB total) [4294698.617000] ivtv0: loading /lib/modules/ivtv_init_mpeg.bin [4294698.770000] tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c driver #0 [4294698.840000] tuner: pal= argument not recognised [4294699.727000] ivtv0: Initialized WinTV PVR 350, card #0 [4294699.727000] ivtv: ==================== END INIT IVTV ==================== [4294699.781000] ivtv0-osd: Framebuffer module loaded (attached to ivtv card id 0) [4294699.802000] ivtv0-osd warning: Framebuffer is at decoder-relative address 0x00510000 and has 1704960 bytes. [4294699.852000] ivtv0-osd: screen coords: [0 0] -> [720 576] [4294699.862000] ivtv0-osd: original global alpha = 208 [4294699.882000] ivtv0-osd: current OSD state = 39 [4294699.912000] ivtv0-osd: new global alpha = 208 (1 255 0) [4294699.912000] ivtv0-osd: framebuffer at 0xd5510000, mapped to 0xfac10000, size 1620k [4294699.912000] ivtv0-osd: mode is 720x576x32, linelength=2880 [4294700.010000] ivtv0-osd: fb1: iTVC15 TV out frame buffer device [4294700.010000] ivtv0: Allocate DMA decoder OSD stream: 16 x 65536 buffers (1024KB total) [4294700.110000] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [4294700.110000] ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17 [4294700.110000] rt2500 1.1.0 CVS 2005/07/10 http://rt2x00.serialmonkey.com [4294700.218000] ohci1394: $Rev: 1250 $ Ben Collins