bash-3.1# dmesg | grep sd*
 scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 6144k, total 16384k
vesafb: mode is 1024x768x32, linelength=4096, pages=4
vesafb: protected mode interface info at c000:ab94
vesafb: pmi: set display start = c00cac22, set palette = c00cac62
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
Console: switching to colour frame buffer device 128x48
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
PCI: setting IRQ 5 as level-triggered
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
hda: max request size: 128KiB
hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hdb: max request size: 128KiB
hdb: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hdb: cache flushes supported
Uniform CD-ROM driver Revision: 3.20
libata version 2.00 loaded.
ata_piix 0000:00:1f.2: version 2.00
scsi0 : ata_piix
ATA: abnormal status 0x7F on port 0xEFE7
scsi1 : ata_piix
ata2.00: ATA-6, max UDMA/100, 390721968 sectors: LBA48 
ata2.00: applying bridge limits
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
 sda: sda1 sda2 < sda5 sda6 >
sd 1:0:0:0: Attached scsi disk sda
usbmon: debugfs is not available
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI: (supports S0 S1 S3 S4 S5)
Time: tsc clocksource has been installed.
md: Autodetecting RAID arrays.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
ReiserFS: hda2: found reiserfs format "3.6" with standard journal
ReiserFS: hda2: using ordered data mode
ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda2: checking transaction log (hda2)
ReiserFS: hda2: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 184k freed
Adding 1951856k swap on /dev/hda1.  Priority:-1 extents:1 across:1951856k
PCI: setting IRQ 11 as level-triggered
rt2500 1.1.0 BETA4 2006/06/18 http://rt2x00.serialmonkey.com
USB Universal Host Controller Interface driver v3.0
PCI: setting IRQ 10 as level-triggered
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 10, io base 0x0000eec0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: 2 ports detected
input: PC Speaker as /class/input/input0
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 10, io base 0x0000ef00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 5, io base 0x0000ef20
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 10, io base 0x0000ef40
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: 2 ports detected
usb 1-1: new low speed USB device using uhci_hcd and address 2
sd 1:0:0:0: Attached scsi generic sg0 type 0
Linux agpgart interface v0.101 (c) Dave Jones
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: 8 ports detected
skge 1.6 addr 0xfeafc000 irq 5 chip Yukon rev 1
skge eth0: addr 00:0c:6e:e4:11:95
agpgart: Detected an Intel i875 Chipset.
agpgart: AGP aperture is 64M @ 0xf4000000
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usb 5-4: new high speed USB device using ehci_hcd and address 5
usb 5-4: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
usb 2-1: new full speed USB device using uhci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: 4 ports detected
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
lp0: using parport0 (polling).
lp0: console ready
usb 1-1: new low speed USB device using uhci_hcd and address 3
usb 1-1: configuration #1 chosen from 1 choice
input: Razer Razer Diamondback Optical Mouse as /class/input/input1
input: USB HID v1.10 Mouse [Razer Razer Diamondback Optical Mouse] on usb-0000:00:1d.0-1
usb 1-2: new low speed USB device using uhci_hcd and address 4
usb 1-2: configuration #1 chosen from 1 choice
input: CHESEN USB Keyboard as /class/input/input2
input: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:1d.0-2
input: CHESEN USB Keyboard as /class/input/input3
input: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:1d.0-2
usb 2-1.1: new full speed USB device using uhci_hcd and address 3
usb 2-1.1: not running at top speed; connect to a high speed hub
usb 2-1.1: configuration #1 chosen from 1 choice
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb 2-1.4: new full speed USB device using uhci_hcd and address 4
usb 2-1.4: configuration #1 chosen from 1 choice
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
NTFS driver 2.1.27 [Flags: R/W MODULE].
NTFS volume version 3.1.
NTFS-fs warning (device sda1): load_system_files(): Unsupported volume flags 0x4000 encountered.
NTFS-fs error (device sda1): load_system_files(): Volume has unsupported flags set.  Mounting read-only.  Run chkdsk and mount in Windows.
NTFS-fs warning (device sda1): load_system_files(): $LogFile is not clean.  Will not be able to remount read-write.  Mount in Windows.
NTFS volume version 3.1.
NTFS-fs error (device sda5): load_system_files(): $LogFile is not clean.  Mounting read-only.  Mount in Windows.
NTFS volume version 3.1.
NTFS-fs error (device sda6): load_system_files(): $LogFile is not clean.  Mounting read-only.  Mount in Windows.
NTFS volume version 3.1.
NTFS-fs error (device hdb1): load_system_files(): Volume is dirty.  Mounting read-only.  Run chkdsk and mount in Windows.
NTFS-fs warning (device hdb1): load_system_files(): $LogFile is not clean.  Will not be able to remount read-write.  Mount in Windows.
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
sdb: Write Protect is off
sdb: Mode Sense: 03 00 00 00
sdb: assuming drive cache: write through
SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
sdb: Write Protect is off
sdb: Mode Sense: 03 00 00 00
sdb: assuming drive cache: write through
 sdb: sdb1
sd 2:0:0:0: Attached scsi disk sdb
sd 2:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sdc: 240640 512-byte hdwr sectors (123 MB)
sdc: Write Protect is off
sdc: Mode Sense: 23 00 00 00
sdc: assuming drive cache: write through
SCSI device sdc: 240640 512-byte hdwr sectors (123 MB)
sdc: Write Protect is off
sdc: Mode Sense: 23 00 00 00
sdc: assuming drive cache: write through
 sdc: sdc1
sd 3:0:0:0: Attached scsi removable disk sdc
sd 3:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sdd: 510976 512-byte hdwr sectors (262 MB)
sdd: Write Protect is off
sdd: Mode Sense: 1b 00 00 00
sdd: assuming drive cache: write through
SCSI device sdd: 510976 512-byte hdwr sectors (262 MB)
sdd: Write Protect is off
sdd: Mode Sense: 1b 00 00 00
sdd: assuming drive cache: write through
 sdd: sdd1
sd 4:0:0:0: Attached scsi removable disk sdd
sd 4:0:0:0: Attached scsi generic sg3 type 0
usb-storage: device scan complete
ata1: soft resetting port
ATA: abnormal status 0x7F on port 0xEFE7
ata1: soft resetting port
ata2: soft resetting port
ATA: abnormal status 0x7F on port 0xEFE7
SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sde: 2880 512-byte hdwr sectors (1 MB)
sde: Write Protect is off
sde: Mode Sense: 23 00 00 00
sde: assuming drive cache: write through
SCSI device sde: 2880 512-byte hdwr sectors (1 MB)
sde: Write Protect is off
sde: Mode Sense: 23 00 00 00
sde: assuming drive cache: write through
 sde: unknown partition table
sd 3:0:0:1: Attached scsi removable disk sde
sd 3:0:0:1: Attached scsi generic sg4 type 0
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
wif0: no IPv6 routers present
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 928 MBytes.
[fglrx] Internal AGP support requested, but kernel AGP support active.
[fglrx] Have to use kernel AGP support to avoid conflicts.
[fglrx] AGP detected, AgpState   = 0x1f004a1b (hardware caps of chipset)
[fglrx] AGP enabled,  AgpCommand = 0x1f004312 (selected caps)
[fglrx] max single GART = 51113984
[fglrx] max single LFB  = 116387840
[fglrx] max single Inv  = 134217728