smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: HITACHI Travelstar DK23XX/DK23XXB series Device Model: HITACHI_DK23EA-40B Serial Number: FT4378 Firmware Version: 00K3A0B6 User Capacity: 40,007,761,920 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 5 ATA Standard is: ATA/ATAPI-5 T13 1321D revision 3 Local Time is: Sat Feb 10 10:55:16 2007 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 248) Self-test routine in progress... 80% of test remaining. Total time to complete Offline data collection: (2020) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 34) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000d 100 100 050 Pre-fail Offline - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 3930 3 Spin_Up_Time 0x0007 100 100 050 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1268 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 3 7 Seek_Error_Rate 0x000f 100 100 050 Pre-fail Always - 343 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 1228 9 Power_On_Minutes 0x0032 085 085 000 Old_age Always - 7988h+00m 10 Spin_Retry_Count 0x0013 100 100 050 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1258 191 G-Sense_Error_Rate 0x000a 100 099 000 Old_age Always - 646 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 52 193 Load_Cycle_Count 0x0032 045 045 000 Old_age Always - 332017/331964 194 Temperature_Celsius 0x0022 070 054 000 Old_age Always - 55 (Lifetime Min/Max 13/63) 195 Hardware_ECC_Recovered 0x001a 100 070 000 Old_age Always - 24 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 3 197 Current_Pending_Sector 0x0032 100 099 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0012 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x0012 100 100 000 Old_age Always - 0 223 Load_Retry_Count 0x0012 100 100 000 Old_age Always - 0 230 Head_Amplitude 0x0032 088 088 000 Old_age Always - 383865 250 Read_Error_Retry_Rate 0x000a 100 001 000 Old_age Always - 76 SMART Error Log Version: 1 ATA Error Count: 118 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 118 occurred at disk power-on lifetime: 3603 hours (150 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 07 78 45 da e0 Error: UNC 7 sectors at LBA = 0x00da4578 = 14304632 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 77 45 da e0 00 00:30:26.720 READ DMA ca 00 08 af 4e 60 e0 00 00:30:26.710 WRITE DMA c8 00 08 b9 a0 da e0 00 00:30:26.620 READ DMA ca 00 07 5f e2 d7 e0 00 00:30:26.620 WRITE DMA ca 00 80 77 27 88 e0 00 00:30:26.620 WRITE DMA Error 117 occurred at disk power-on lifetime: 3603 hours (150 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 51 07 78 45 da e0 Error: AMNF 7 sectors at LBA = 0x00da4578 = 14304632 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 77 45 da e0 00 00:30:24.660 READ DMA c8 00 06 5f e2 d7 e0 00 00:30:24.650 READ DMA c8 00 20 bc 82 db e0 00 00:30:24.640 READ DMA c8 00 40 39 82 db e0 00 00:30:24.640 READ DMA c8 00 18 f9 7f db e0 00 00:30:24.640 READ DMA Error 116 occurred at disk power-on lifetime: 3603 hours (150 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 51 07 78 45 da e0 Error: AMNF 7 sectors at LBA = 0x00da4578 = 14304632 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 77 45 da e0 00 00:30:22.510 READ DMA c8 00 10 31 da e7 e0 00 00:30:22.430 READ DMA c8 00 08 a7 66 de e0 00 00:30:22.430 READ DMA c8 00 20 87 66 de e0 00 00:30:22.430 READ DMA c8 00 20 67 66 de e0 00 00:30:22.430 READ DMA Error 115 occurred at disk power-on lifetime: 3603 hours (150 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 51 07 78 45 da e0 Error: AMNF 7 sectors at LBA = 0x00da4578 = 14304632 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 d8 08 77 45 da e0 00 00:30:14.120 READ DMA ca d8 08 af 4e 60 e0 00 00:30:14.120 WRITE DMA c8 d8 01 00 00 00 e0 00 00:30:14.040 READ DMA ca d8 08 9f 29 62 e0 00 00:30:14.040 WRITE DMA ca d8 08 cf 56 60 e0 00 00:30:14.040 WRITE DMA Error 114 occurred at disk power-on lifetime: 3603 hours (150 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 51 07 78 45 da e0 Error: AMNF 7 sectors at LBA = 0x00da4578 = 14304632 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 d8 08 77 45 da e0 00 00:30:12.090 READ DMA ca d8 08 5f 29 62 e0 00 00:30:12.090 WRITE DMA c8 d8 17 2f 2b 46 e0 00 00:30:12.080 READ DMA c8 d8 02 f7 3b 40 e0 00 00:30:12.060 READ DMA c8 d8 12 bf 02 40 e0 00 00:30:12.040 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Self-test routine in progress 80% 7988 - # 2 Extended offline Completed without error 00% 7597 - # 3 Short offline Completed without error 00% 7596 - # 4 Short offline Completed without error 00% 6076 - Device does not support Selective Self Tests/Logging