zapata.conf: ;;; line="1 WCTDM/0/0 FXOKS" signalling=fxo_ks callerid="Channel 1" <6001> mailbox=6001 group=5 context=ext_germany channel => 1 callerid= mailbox= group= context=default ;;; line="2 WCTDM/0/1 FXOKS" signalling=fxo_ks callerid="Channel 2" <6002> mailbox=6002 group=5 context=from-internal channel => 2 callerid= mailbox= group= context=default ;;; line="3 WCTDM/0/2 FXSKS" signalling=fxs_ks callerid=asreceived group=0 context=from-pstn channel => 3 context=default ;;; line="4 WCTDM/0/3 FXSKS" signalling=fxs_ks callerid=asreceived group=0 context=from-pstn channel => 4 context=default zaptel.conf: # Autogenerated by ./genzaptelconf -- do not hand edit # Zaptel Configuration File # # This file is parsed by the Zaptel Configurator, ztcfg # # It must be in the module loading order # Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1" fxoks=1 fxoks=2 fxsks=3 fxsks=4 # Global data loadzone = de defaultzone = de ztcfg -vvvv: Zaptel Version: 1.4.0 Echo Canceller: MG2 Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Slaves: 04) 4 channels configured. cat /proc/interrupts CPU0 CPU1 0: 111773104 0 IO-APIC-edge timer 1: 10 251 IO-APIC-edge i8042 6: 6 0 IO-APIC-edge floppy 7: 2 0 IO-APIC-edge parport0 8: 1 0 IO-APIC-edge rtc 9: 1 0 IO-APIC-level acpi 50: 0 0 IO-APIC-level uhci_hcd:usb5, ehci_hcd:usb6 58: 142251 0 IO-APIC-level skge 169: 0 0 IO-APIC-level uhci_hcd:usb1, libata 177: 6685 24376 IO-APIC-level 3w-9xxx, uhci_hcd:usb2 225: 27380 111701653 IO-APIC-level uhci_hcd:usb3, ehci_hcd:usb7, wctdm 233: 0 0 IO-APIC-level uhci_hcd:usb4, libata, libata NMI: 0 0 LOC: 108201696 108201731 ERR: 0 MIS: 0