Linux version 2.6.20-gentoo (root@gentoo_gold) (gcc version 4.1.2 (Gentoo 4.1.2)) #4 Sat Feb 17 21:26:20 EET 2007 Command line: BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000fefffc00 - 00000000ff000000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 262128) 1 entries of 256 used end_pfn_map = 1048576 DMI 2.2 present. ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f7170 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff3000 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff3040 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff79c0 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000 Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 262128) 1 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 262128 On node 0 totalpages: 262031 DMA zone: 56 pages used for memmap DMA zone: 1170 pages reserved DMA zone: 2773 pages, LIFO batch:0 DMA32 zone: 3527 pages used for memmap DMA32 zone: 254505 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Nosave address range: 000000000009f000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000f0000 Nosave address range: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Built 1 zonelists. Total pages: 257278 Kernel command line: Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. time.c: Detected 2210.764 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Memory: 1026612k/1048512k available (2510k kernel code, 21136k reserved, 1396k data, 196k init) Calibrating delay using timer specific routine.. 4424.22 BogoMIPS (lpj=8848450) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 00 ACPI: Core revision 20060707 Using local APIC timer interrupts. result 12561159 Detected 12.561 MHz APIC timer. testing NMI watchdog ... OK. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: Power Resource [ISAV] (on) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled. ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. SCSI subsystem initialized libata version 2.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized PCI: Bridge: 0000:00:0b.0 IO window: 9000-9fff MEM window: e0000000-e1ffffff PREFETCH window: b0000000-cfffffff PCI: Bridge: 0000:00:0e.0 IO window: a000-afff MEM window: e2000000-e3ffffff PREFETCH window: 50000000-500fffff PCI: Setting latency timer of device 0000:00:0e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Total HugeTLB memory allocated, 0 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) lp: driver loaded but no devices found input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PWRB] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A parport0: PC-style at 0x378 [PCSPP,TRISTATE] lp0: using parport0 (polling). Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59. 8139too Fast Ethernet driver 0.9.28 ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17 eth0: RealTek RTL8139 at 0xffffc20000004000, 00:e7:00:3d:83:32, IRQ 17 eth0: Identified 8139 chip type 'RTL-8100B/8139D' netconsole: not configured, aborting serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input2 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE3-250: IDE controller at PCI slot 0000:00:08.0 NFORCE3-250: chipset revision 162 NFORCE3-250: not 100% native mode: will probe irqs later NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdc: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33) megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006) megasas: 00.00.03.05 Mon Oct 02 11:21:32 PDT 2006 sata_nv 0000:00:0a.0: version 3.2 ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSJ] -> GSI 23 (level, high) -> IRQ 23 PCI: Setting latency timer of device 0000:00:0a.0 to 64 ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD400 irq 23 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD408 irq 23 scsi0 : sata_nv ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7, max UDMA/133, 320173056 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 1 ata1.00: configured for UDMA/133 scsi1 : sata_nv ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATA-7, max UDMA/133, 320173056 sectors: LBA48 ata2.00: ata2: dev 0 multi count 1 ata2.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA Maxtor 6B160M0 BANC PQ: 0 ANSI: 5 SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 > sda4 sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Direct-Access ATA Maxtor 6Y160M0 YAR5 PQ: 0 ANSI: 5 SCSI device sdb: 320173056 512-byte hdwr sectors (163929 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdb: 320173056 512-byte hdwr sectors (163929 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sd 1:0:0:0: Attached scsi disk sdb sd 1:0:0:0: Attached scsi generic sg1 type 0 Fusion MPT base driver 3.04.03 Copyright (c) 1999-2007 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.03 Fusion MPT SAS Host driver 3.04.03 ieee1394: raw1394: /dev/raw1394 device initialized ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 22 (level, high) -> IRQ 22 PCI: Setting latency timer of device 0000:00:02.2 to 64 ehci_hcd 0000:00:02.2: EHCI Host Controller ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.2: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.2 ehci_hcd 0000:00:02.2: irq 22, io mem 0xe4004000 ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, high) -> IRQ 21 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 21, io mem 0xe4002000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level, high) -> IRQ 20 PCI: Setting latency timer of device 0000:00:02.1 to 64 ohci_hcd 0000:00:02.1: OHCI Host Controller ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:02.1: irq 20, io mem 0xe4003000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected usb 2-3: new low speed USB device using ohci_hcd and address 2 usb 2-3: configuration #1 chosen from 1 choice usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. input: Microsoft Microsoft Wireless Optical Mouse 1.00 as /class/input/input3 input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse 1.00] on usb-0000:00:02.0-3 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver Intel 810 + AC97 Audio, version 1.01, 21:25:04 Feb 17 2007 oprofile: using NMI interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (version 2.00.00) ACPI Exception (acpi_processor-0235): AE_NOT_FOUND, Evaluating _PSS [20060707] powernow-k8: BIOS error - no PSB or ACPI _PSS objects ACPI Exception (acpi_processor-0235): AE_NOT_FOUND, Evaluating _PSS [20060707] ACPI: (supports S0 S1 S4 S5) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 196k freed ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:11:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 8704 in res 51/40:11:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:11:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 8704 in res 51/40:11:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:11:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 8704 in res 51/40:11:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:11:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 8704 in res 51/40:11:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:11:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 8704 in res 51/40:11:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:11:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 8704 in res 51/40:11:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 sd 0:0:0:0: SCSI error: return code = 0x08000002 sda: Current [descriptor]: sense key: Medium Error Additional sense: Unrecovered read error - auto reallocate failed Descriptor sense data with sense descriptors (in hex): 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 01 a6 9c 04 end_request: I/O error, dev sda, sector 27696132 Buffer I/O error on device sda7, logical block 9 Buffer I/O error on device sda7, logical block 10 Buffer I/O error on device sda7, logical block 11 Buffer I/O error on device sda7, logical block 12 Buffer I/O error on device sda7, logical block 13 Buffer I/O error on device sda7, logical block 14 Buffer I/O error on device sda7, logical block 15 Buffer I/O error on device sda7, logical block 16 Buffer I/O error on device sda7, logical block 17 Buffer I/O error on device sda7, logical block 18 ata1: EH complete SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 sd 0:0:0:0: SCSI error: return code = 0x08000002 sda: Current [descriptor]: sense key: Medium Error Additional sense: Unrecovered read error - auto reallocate failed Descriptor sense data with sense descriptors (in hex): 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 01 a6 9c 04 end_request: I/O error, dev sda, sector 27696132 printk: 7 messages suppressed. Buffer I/O error on device sda7, logical block 9 ata1: EH complete SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected AGP bridge 0 agpgart: Setting up Nforce3 AGP. agpgart: AGP aperture is 256M @ 0xd0000000 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 sd 0:0:0:0: SCSI error: return code = 0x08000002 sda: Current [descriptor]: sense key: Medium Error Additional sense: Unrecovered read error - auto reallocate failed Descriptor sense data with sense descriptors (in hex): 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 01 a6 9c 04 end_request: I/O error, dev sda, sector 27696132 printk: 6 messages suppressed. Buffer I/O error on device sda7, logical block 9 Buffer I/O error on device sda7, logical block 10 ata1: EH complete SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 23 (level, high) -> IRQ 23 PCI: Setting latency timer of device 0000:00:06.0 to 64 intel8x0_measure_ac97_clock: measured 54661 usecs intel8x0: clocking to 46853 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 sd 0:0:0:0: SCSI error: return code = 0x08000002 sda: Current [descriptor]: sense key: Medium Error Additional sense: Unrecovered read error - auto reallocate failed Descriptor sense data with sense descriptors (in hex): 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 01 a6 9c 04 end_request: I/O error, dev sda, sector 27696132 printk: 5 messages suppressed. Buffer I/O error on device sda7, logical block 9 Buffer I/O error on device sda7, logical block 10 ata1: EH complete SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40 EXT3 FS on sda4, internal journal fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [fglrx] Maximum main memory to use for locked dma buffers: 921 MBytes. [fglrx] module loaded - fglrx 8.33.6 [Jan 8 2007] on minor 0 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 sd 0:0:0:0: SCSI error: return code = 0x08000002 sda: Current [descriptor]: sense key: Medium Error Additional sense: Unrecovered read error - auto reallocate failed Descriptor sense data with sense descriptors (in hex): 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 01 a6 9c 04 end_request: I/O error, dev sda, sector 27696132 printk: 5 messages suppressed. Buffer I/O error on device sda7, logical block 9 Buffer I/O error on device sda7, logical block 10 ata1: EH complete SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB) ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 sd 0:0:0:0: SCSI error: return code = 0x08000002 sda: Current [descriptor]: sense key: Medium Error Additional sense: Unrecovered read error - auto reallocate failed Descriptor sense data with sense descriptors (in hex): 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 01 a6 9c 04 end_request: I/O error, dev sda, sector 27696132 printk: 21 messages suppressed. Buffer I/O error on device sda7, logical block 9 Buffer I/O error on device sda7, logical block 10 ata1: EH complete sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:08:03:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 4096 in res 51/40:08:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:08:03:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 4096 in res 51/40:08:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:08:03:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 4096 in res 51/40:08:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:08:03:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 4096 in res 51/40:08:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:08:03:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 4096 in res 51/40:08:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:08:03:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 4096 in res 51/40:08:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 sd 0:0:0:0: SCSI error: return code = 0x08000002 sda: Current [descriptor]: sense key: Medium Error Additional sense: Unrecovered read error - auto reallocate failed Descriptor sense data with sense descriptors (in hex): 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 01 a6 9c 04 end_request: I/O error, dev sda, sector 27696132 ata1: EH complete EXT3-fs: can't read group descriptor 0 SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA kjournald starting. Commit interval 5 seconds EXT3 FS on sda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2008116k swap on /dev/sda2. Priority:-1 extents:1 across:2008116k Real Time Clock Driver v1.12ac ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:14:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 10240 in res 51/40:14:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:14:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 10240 in res 51/40:14:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:14:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 10240 in res 51/40:14:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:14:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 10240 in res 51/40:14:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:14:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 10240 in res 51/40:14:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:14:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 10240 in res 51/40:14:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 sd 0:0:0:0: SCSI error: return code = 0x08000002 sda: Current [descriptor]: sense key: Medium Error Additional sense: Unrecovered read error - auto reallocate failed Descriptor sense data with sense descriptors (in hex): 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 01 a6 9c 04 end_request: I/O error, dev sda, sector 27696132 printk: 5 messages suppressed. Buffer I/O error on device sda7, logical block 9 Buffer I/O error on device sda7, logical block 10 Buffer I/O error on device sda7, logical block 11 Buffer I/O error on device sda7, logical block 12 Buffer I/O error on device sda7, logical block 13 Buffer I/O error on device sda7, logical block 14 Buffer I/O error on device sda7, logical block 15 ata1: EH complete SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 sd 0:0:0:0: SCSI error: return code = 0x08000002 sda: Current [descriptor]: sense key: Medium Error Additional sense: Unrecovered read error - auto reallocate failed Descriptor sense data with sense descriptors (in hex): 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 01 a6 9c 04 end_request: I/O error, dev sda, sector 27696132 printk: 13 messages suppressed. Buffer I/O error on device sda7, logical block 9 ata1: EH complete SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16 [fglrx] Internal AGP support requested, but kernel AGP support active. [fglrx] Have to use kernel AGP support to avoid conflicts. [fglrx] AGP detected, AgpState = 0x1f00421b (hardware caps of chipset) agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [fglrx] AGP enabled, AgpCommand = 0x1f004312 (selected caps) [fglrx] total GART = 268435456 [fglrx] free GART = 252440576 [fglrx] max single GART = 252440576 [fglrx] total LFB = 134217728 [fglrx] free LFB = 116387840 [fglrx] max single LFB = 116387840 [fglrx] total Inv = 134217728 [fglrx] free Inv = 134217728 [fglrx] max single Inv = 134217728 [fglrx] total TIM = 0 eth0: no IPv6 routers present [fglrx] Internal AGP support requested, but kernel AGP support active. [fglrx] Have to use kernel AGP support to avoid conflicts. [fglrx] AGP detected, AgpState = 0x1f00421b (hardware caps of chipset) agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [fglrx] AGP enabled, AgpCommand = 0x1f004312 (selected caps) [fglrx] total GART = 268435456 [fglrx] free GART = 252440576 [fglrx] max single GART = 252440576 [fglrx] total LFB = 134217728 [fglrx] free LFB = 116387840 [fglrx] max single LFB = 116387840 [fglrx] total Inv = 134217728 [fglrx] free Inv = 134217728 [fglrx] max single Inv = 134217728 [fglrx] total TIM = 0 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 sd 0:0:0:0: SCSI error: return code = 0x08000002 sda: Current [descriptor]: sense key: Medium Error Additional sense: Unrecovered read error - auto reallocate failed Descriptor sense data with sense descriptors (in hex): 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 01 a6 9c 04 end_request: I/O error, dev sda, sector 27696132 printk: 6 messages suppressed. Buffer I/O error on device sda7, logical block 9 Buffer I/O error on device sda7, logical block 10 Buffer I/O error on device sda7, logical block 11 Buffer I/O error on device sda7, logical block 12 Buffer I/O error on device sda7, logical block 13 Buffer I/O error on device sda7, logical block 14 Buffer I/O error on device sda7, logical block 15 Buffer I/O error on device sda7, logical block 16 Buffer I/O error on device sda7, logical block 17 Buffer I/O error on device sda7, logical block 18 ata1: EH complete SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB) ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 sd 0:0:0:0: SCSI error: return code = 0x08000002 sda: Current [descriptor]: sense key: Medium Error Additional sense: Unrecovered read error - auto reallocate failed Descriptor sense data with sense descriptors (in hex): 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 01 a6 9c 04 end_request: I/O error, dev sda, sector 27696132 printk: 13 messages suppressed. Buffer I/O error on device sda7, logical block 9 Buffer I/O error on device sda7, logical block 10 ata1: EH complete sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 sd 0:0:0:0: SCSI error: return code = 0x08000002 sda: Current [descriptor]: sense key: Medium Error Additional sense: Unrecovered read error - auto reallocate failed Descriptor sense data with sense descriptors (in hex): 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 01 a6 9c 04 end_request: I/O error, dev sda, sector 27696132 printk: 5 messages suppressed. Buffer I/O error on device sda7, logical block 9 Buffer I/O error on device sda7, logical block 10 Buffer I/O error on device sda7, logical block 11 Buffer I/O error on device sda7, logical block 12 Buffer I/O error on device sda7, logical block 13 Buffer I/O error on device sda7, logical block 14 Buffer I/O error on device sda7, logical block 15 Buffer I/O error on device sda7, logical block 16 Buffer I/O error on device sda7, logical block 17 Buffer I/O error on device sda7, logical block 18 ata1: EH complete SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB) ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (BMDMA stat 0x24) ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error) ata1.00: configured for UDMA/133 sd 0:0:0:0: SCSI error: return code = 0x08000002 sda: Current [descriptor]: sense key: Medium Error Additional sense: Unrecovered read error - auto reallocate failed Descriptor sense data with sense descriptors (in hex): 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 01 a6 9c 04 end_request: I/O error, dev sda, sector 27696132 printk: 13 messages suppressed. Buffer I/O error on device sda7, logical block 9 ata1: EH complete sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA