Using PowerMac machine description Total memory = 512MB; using 1024kB for hash table (at cff00000) Linux version 2.6.19-gentoo-r5 (root@localhost) (gcc version 4.1.1 (Gentoo 4.1.1)) #10 Mon Feb 19 01:37:47 PST 2007 Found initrd at 0xc1a00000:0xc1a7e000 Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2 Mapped at 0xfdfc0000 Found a Intrepid mac-io controller, rev: 0, mapped at 0xfdf40000 Processor NAP mode on idle enabled. PowerMac motherboard: iBook G4 via-pmu: Server Mode is disabled PMU driver v2 initialized for Core99, firmware: 0c Entering add_active_range(0, 0, 131072) 0 entries of 256 used Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0 Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0 Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0 nvram: Checking bank 0... nvram: gen0=550, gen1=549 nvram: Active bank is: 0 nvram: OF partition at 0x410 nvram: XP partition at 0x1020 nvram: NR partition at 0x1120 Top of RAM: 0x20000000, Total RAM: 0x20000000 Memory hole size: 0MB Zone PFN ranges: DMA 0 -> 131072 Normal 131072 -> 131072 early_node_map[1] active PFN ranges 0: 0 -> 131072 On node 0 totalpages: 131072 DMA zone: 1024 pages used for memmap DMA zone: 0 pages reserved DMA zone: 130048 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Built 1 zonelists. Total pages: 130048 Kernel command line: root=/dev/hda4 ro video=radeonfb:1024x768-32@70 splash=silent,fadein,theme:livecd-2006.1 quiet CONSOLE=/dev/tty1 mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs mpic: ISU size: 64, shift: 6, mask: 3f mpic: Initializing for 64 sources PID hash table entries: 2048 (order: 11, 8192 bytes) GMT Delta read from XPRAM: 0 minutes, DST: off time_init: decrementer frequency = 18.432000 MHz time_init: processor frequency = 1333.333330 MHz Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 512640k/524288k available (4400k kernel code, 11164k reserved, 380k data, 158k bss, 192k init) Calibrating delay loop... 36.73 BogoMIPS (lpj=73472) Mount-cache hash table entries: 512 device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1" checking if image is initramfs... it is Freeing initrd memory: 504k freed PM: Adding info for No Bus:platform NET: Registered protocol family 16 KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000 channel 0 bus channel 1 bus KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000 channel 0 bus PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c channel 1 bus channel 2 bus PCI: Probing PCI hardware PM: Adding info for No Bus:pci0000:00 PM: Adding info for pci:0000:00:0b.0 PM: Adding info for pci:0000:00:10.0 PM: Adding info for No Bus:pci0001:10 PM: Adding info for pci:0001:10:0b.0 PM: Adding info for pci:0001:10:12.0 PM: Adding info for pci:0001:10:17.0 PM: Adding info for pci:0001:10:18.0 PM: Adding info for pci:0001:10:19.0 PM: Adding info for pci:0001:10:1a.0 PM: Adding info for pci:0001:10:1b.0 PM: Adding info for pci:0001:10:1b.1 PM: Adding info for pci:0001:10:1b.2 PM: Adding info for No Bus:pci0002:20 PM: Adding info for pci:0002:20:0b.0 PM: Adding info for pci:0002:20:0d.0 PM: Adding info for pci:0002:20:0e.0 PM: Adding info for pci:0002:20:0f.0 PCI: Cannot allocate resource region 0 of device 0001:10:18.0 PCI: Cannot allocate resource region 0 of device 0001:10:19.0 Apple USB OHCI 0001:10:18.0 disabled by firmware Apple USB OHCI 0001:10:19.0 disabled by firmware PM: Adding info for platform:i2c-powermac.0 PM: Adding info for platform:i2c-powermac.1 PM: Adding info for platform:i2c-powermac.2 PM: Adding info for platform:i2c-powermac.3 PM: Adding info for platform:i2c-powermac.4 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ieee1394: Initialized config rom entry `ip1394' PCI: Enabling device 0002:20:0e.0 (0000 -> 0002) PM: Adding info for ieee1394:fw-host0 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] IR/IT contexts=[8/8] NET: Registered protocol family 2 IP route cache hash table entries: 16384 (order: 4, 65536 bytes) TCP established hash table entries: 65536 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 5, 131072 bytes) TCP: Hash tables configured (established 65536 bind 32768) TCP reno registered Thermal assist unit not available Registering PowerMac CPU frequency driver Low: 666 Mhz, High: 1333 Mhz, Boot: 666 Mhz io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Generic RTC Driver v1.07 Macintosh non-volatile memory driver v1.1 PCI: Enabling device 0000:00:10.0 (0006 -> 0007) radeonfb (0000:00:10.0): Invalid ROM signature 0 should be 0xaa55 radeonfb: Retrieved PLL infos from Open Firmware radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=190.00 Mhz, System=183.00 MHz radeonfb: PLL min 12000 max 35000 PM: Adding info for No Bus:i2c-0 PM: Adding info for No Bus:i2c-1 PM: Adding info for No Bus:i2c-2 PM: Adding info for No Bus:i2c-3 i2c_adapter i2c-2: unable to read EDID block. i2c_adapter i2c-2: unable to read EDID block. i2c_adapter i2c-2: unable to read EDID block. i2c_adapter i2c-3: unable to read EDID block. i2c_adapter i2c-3: unable to read EDID block. i2c_adapter i2c-3: unable to read EDID block. radeonfb: Monitor 1 type LCD found radeonfb: EDID probed radeonfb: Monitor 2 type no found radeonfb: Using Firmware dividers 0x000600ad from PPLL 0 PM: Adding info for ieee1394:000d93fffe4af64a ieee1394: Host added: ID:BUS[0-00:1023] GUID[000d93fffe4af64a] PM: Adding info for ieee1394:000d93fffe4af64a-0 radeonfb: Dynamic Clock Power Management enabled Console: switching to colour frame buffer device 128x48 fbsplash: console 0 using theme 'livecd-2006.1' fbsplash: switched splash state to 'on' on console 0 radeonfb: Backlight initialized (radeonbl0) radeonfb (0000:00:10.0): ATI Radeon \c RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com) PHY ID: 4061e4, addr: 0 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0d:93:4a:f6:4a eth0: Found BCM5221 PHY pcnet32.c:v1.33 27.Jun.2006 tsbogend@alpha.franken.de PPP generic driver version 2.4.2 PPP Deflate Compression module registered MacIO PCI driver attached to Intrepid chipset PM: Adding info for macio:0.80000000:mac-io PM: Adding info for macio:0.00040000:interrup PM: Adding info for macio:0.00000050:gpio PM: Adding info for macio:0.00013000:escc PM: Adding info for macio:0.00010000:i2s PM: Adding info for macio:0.00015000:timer PM: Adding info for macio:0.00016000:via-pmu PM: Adding info for macio:0.0000f300:backligh PM: Adding info for macio:0.00018000:i2c PM: Adding info for macio:0.00020000:ata-3 PM: Adding info for macio:0.00013020:ch-a PM: Adding info for macio:0.00013000:ch-b input: Macintosh mouse button emulation as /class/input/input0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx adb: starting probe task... PCI: Enabling device 0002:20:0d.0 (0000 -> 0002) adb devices: [2]: 2 c3 [3]: 3 1 [7]: 7 1f ADB keyboard at 2, handler 1 Detected ADB keyboard, type ANSI. input: ADB keyboard as /class/input/input1 input: ADB Powerbook buttons as /class/input/input2 ADB mouse at 3, handler set to 4 (trackpad) input: ADB mouse as /class/input/input3 adb: finished probe task... ide0: Found Apple UniNorth ATA-6 controller, bus ID 3, irq 39 Probing IDE interface ide0... hda: WDC WD1200VE-00KWT0, ATA DISK drive PM: Adding info for No Bus:ide0 hda: Enabling Ultra DMA 5 ide0 at 0xe1072000-0xe1072007,0xe1072160 on irq 39 PM: Adding info for ide:0.0 eth0: Link is up at 100 Mbps, full-duplex. ide1: Found Apple KeyLargo ATA-3 controller, bus ID 0, irq 24 Probing IDE interface ide1... hdc: MATSHITACD-RW CW-8123, ATAPI CD/DVD-ROM drive PM: Adding info for No Bus:ide1 hdc: Enabling MultiWord DMA 2 ide1 at 0xe106e000-0xe106e007,0xe106e160 on irq 24 PM: Adding info for ide:1.0 hda: max request size: 512KiB hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, (U)DMA Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide mesh: configured for synchronous 5 MB/s st: Version 20050830, fixed bufsize 32768, s/g segs 256 ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance usbmon: debugfs is not available PCI: Enabling device 0001:10:1b.2 (0004 -> 0006) ehci_hcd 0001:10:1b.2: EHCI Host Controller ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 1 ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000 ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 PM: Adding info for usb:usb1 PM: Adding info for No Bus:usbdev1.1_ep00 usb usb1: configuration #1 chosen from 1 choice PM: Adding info for usb:1-0:1.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected PM: Adding info for No Bus:usbdev1.1_ep81 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) Apple USB OHCI 0001:10:18.0 disabled by firmware Apple USB OHCI 0001:10:19.0 disabled by firmware PCI: Enabling device 0001:10:1a.0 (0000 -> 0002) ohci_hcd 0001:10:1a.0: OHCI Host Controller ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 2 ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000 PM: Adding info for usb:usb2 PM: Adding info for No Bus:usbdev2.1_ep00 usb usb2: configuration #1 chosen from 1 choice PM: Adding info for usb:2-0:1.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PM: Adding info for No Bus:usbdev2.1_ep81 PCI: Enabling device 0001:10:1b.0 (0000 -> 0002) ohci_hcd 0001:10:1b.0: OHCI Host Controller ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 3 ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000 PM: Adding info for usb:usb3 PM: Adding info for No Bus:usbdev3.1_ep00 usb usb3: configuration #1 chosen from 1 choice PM: Adding info for usb:3-0:1.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected PM: Adding info for No Bus:usbdev3.1_ep81 PCI: Enabling device 0001:10:1b.1 (0000 -> 0002) ohci_hcd 0001:10:1b.1: OHCI Host Controller ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 4 ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000 PM: Adding info for usb:usb4 PM: Adding info for No Bus:usbdev4.1_ep00 usb usb4: configuration #1 chosen from 1 choice PM: Adding info for usb:4-0:1.0 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected PM: Adding info for No Bus:usbdev4.1_ep81 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver usbcore: registered new interface driver appletouch mice: PS/2 mouse device common for all mice i2c /dev entries driver PM: Adding info for No Bus:i2c-4 PowerMac i2c bus pmu 2 registered PM: Adding info for No Bus:i2c-5 PowerMac i2c bus pmu 1 registered PM: Adding info for No Bus:i2c-6 PowerMac i2c bus mac-io 0 registered PM: Adding info for No Bus:i2c-7 PowerMac i2c bus uni-n 1 registered PM: Adding info for No Bus:i2c-8 PowerMac i2c bus uni-n 0 registered Advanced Linux Sound Architecture Driver Version 1.0.13 (Tue Nov 28 14:07:24 2006 UTC). snd-aoa-codec-tas: found 'deq' node PM: Adding info for i2c:6-0035 snd-aoa-codec-tas: tas found, addr 0x35 on /pci@f2000000/mac-io@17/i2c@18000/deq@6a ALSA device list: No soundcards found. oprofile: using ppc/7450 performance monitoring. TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 input: PMU as /class/input/input4 Registered led device: pmu-front-led kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 192k init Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected Apple UniNorth 2 chipset agpgart: configuring for size idx: 8 agpgart: AGP aperture is 32M @ 0x0 ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation bcm43xx driver PCI: Enabling device 0001:10:12.0 (0004 -> 0006) bcm43xx: Chip ID 0x4306, rev 0x3 bcm43xx: Number of cores: 5 bcm43xx: Core 0: ID 0x800, rev 0x4, vendor 0x4243, enabled bcm43xx: Core 1: ID 0x812, rev 0x5, vendor 0x4243, disabled bcm43xx: Core 2: ID 0x80d, rev 0x2, vendor 0x4243, enabled bcm43xx: Core 3: ID 0x807, rev 0x2, vendor 0x4243, disabled bcm43xx: Core 4: ID 0x804, rev 0x9, vendor 0x4243, enabled bcm43xx: PHY connected bcm43xx: Detected PHY: Version: 2, Type 2, Revision 2 bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2) bcm43xx: Radio turned off bcm43xx: Radio turned off pmac_zilog: 0.6 (Benjamin Herrenschmidt ) ttyS0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port ttyS1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port EXT3 FS on hda4, internal journal Adding 524280k swap on /dev/hda3. Priority:-1 extents:1 across:524280k eth0: Link is up at 100 Mbps, full-duplex. eth0: Pause is disabled [drm] Initialized drm 1.0.1 20051102 [drm] Initialized radeon 1.25.0 20060524 on minor 0: [drm] Used old pci detect: framebuffer loaded agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode [drm] Setting GART location based on new memory map [drm] Loading R200 Microcode [drm] writeback test succeeded in 1 usecs agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode [drm] Loading R200 Microcode agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode [drm] Loading R200 Microcode agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode [drm] Loading R200 Microcode