[channels]
language=en
context=fxs

signalling=fxo_ls

; A variety of timing parameters can be specified as well
; Including:
;    prewink:     Pre-wink time (default 50ms)
;    preflash:    Pre-flash time (default 50ms)
;    wink:        Wink time (default 150ms)
;    flash:       Flash time (default 750ms)
;    start:       Start time (default 1500ms)
;    rxwink:      Receiver wink time (default 300ms)
;    rxflash:     Receiver flashtime (default 1250ms)
;    debounce:    Debounce timing (default 600ms)
;
rxwink=300              ; Atlas seems to use long (250ms) winks

usedistinctiveringdetection=no

usecallerid=yes
cidsignalling=bell
cidstart=ring
hidecallerid=no

callwaiting=no
callwaitingcallerid=no
restrictcid=no
usecallingpres=yes

threewaycalling=no
transfer=no
cancallforward=no
callreturn=no

mailbox=8880110

echocancel=yes
echocancelwhenbridged=no

; In some cases, the echo canceller doesn't train quickly enough and there
; is echo at the beginning of the call.  Enabling echo training will cause
; asterisk to briefly mute the channel, send an impulse, and use the impulse
; response to pre-train the echo canceller so it can start out with a much
; closer idea of the actual echo.  Value may be "yes", "no", or a number of
; milliseconds to delay before training (default = 400)
;
;echotraining=yes
;echotraining=800

relaxdtmf=no

;rxgain=0.0
;txgain=0.0

group=1
callgroup=1
pickupgroup=1

immediate=no

;callerid="Green Phone"<(256) 428-6121>
callerid="GREAT SAUNAS"<(800) 514-7481>

;amaflags=default
;accountcode=lss0101

adsi=no
busydetect=no
;busycount=4

;hanguponpolarityswitch

callprogress=no
;progzone=us
;pulsedial=yes

;faxdetect=both
;faxdetect=incoming
;faxdetect=outgoing
faxdetect=no

;musiconhold=default

; Configure jitter buffers in zapata (each one is 20ms, default is 4)
jitterbuffers=4

; You can define your own custom ring cadences here.  You can define up to
; 8 pairs.  If the silence is negative, it indicates where the callerid
; spill is to be placed.  Also, if you define any custom cadences, the
; default cadences will be turned off.
;
; Syntax is:  cadence=ring,silence[,ring,silence[...]]
;
; These are the default cadences:
;
;cadence=125,125,2000,-4000
;cadence=250,250,500,1000,250,250,500,-4000
;cadence=125,125,125,125,125,-4000
;cadence=1000,500,2500,-5000

channel => 1-5