localhost joel # FIKA 5K2 Boot Strap [RELEASE BUILD] (c) 2002-2006 bplan GmbH (B UILD 20061101134833) Running on CPU PVR: 0x80822014 Running on system SVR: 0x80110022 BIOS Code position: 0xFFF040D0 Setup System Config... Done. Setup Memory Config... Done. Setup PCI... Done. Setup ATA... Done. Setup USB... Done. Setup ETH... Done. Testing 08000000 Bytes, Pass: 00000000 Failed: 00000000 RAM TEST (fill random)... Done. cpu0: PowerPC,G2 CPUClock 396 Mhz BUSClock 132 Mhz (Version 0x8082,0x2014) Welcome to SmartFirmware(tm) for bplan EFIKA5K2 Version 1.3 (20061107101950) SmartFirmware(tm) Copyright 1996-2001 by CodeGen, Inc. All Rights Reserved. Pegasos BIOS Extensions Copyright 2001-2006 by bplan GmbH. All Rights Reserved. ok setenv server-ip 192.168.0.1 server-ip = 192.168.0.1 ok setenv client-ip 192.168.0.254 client-ip = 192.168.0.254 ok 8.0.254 panic=10 root=/dev/nfs nfsroot=192.168.0.1:/nfsroot/efika zImage starting: loaded at 0x00400000 (sp: 0x017ffe90) Allocating 0x36da6c bytes for kernel ... OF version = 'EFIKA5K2,1.3' gunzipping (0x1800000 <- 0x409000:0x587d3c)...done 0x34e02c bytes OF stdout device is: /failsafe command line: console=ttyPSC0 ip=192.168.0.254 panic=10 root=/dev/nfs nfsroot=19 2.168.0.1:/nfsroot/efika memory layout at init: alloc_bottom : 01b72000 alloc_top : 30000000 alloc_top_hi : f000c000 rmo_top : 30000000 ram_top : f000c000 Looking for displays instantiating rtas at 0x07ffb000 ... done Applying EFIKA device tree fixups copying OF device tree ... Building dt strings... Building dt structure... Device tree strings 0x01b73000 -> 0x01b736c9 Device tree struct 0x01b74000 -> 0x01b76000 Calling quiesce ... returning from prom_init Using Efika machine description Only using first contiguous memory region<5>Linux version 2.6.19-efika-r5-efika (root@localhost) (gcc version 4.1.1 (Gentoo 4.1.1)) #1 Tue Feb 20 19:14:15 UTC 2 007 Efika: PCI bus 0 controlled by /pci@80000000 Zone PFN ranges: DMA 0 -> 32768 Normal 32768 -> 32768 early_node_map[1] active PFN ranges 0: 0 -> 32768 Built 1 zonelists. Total pages: 32512 Kernel command line: console=ttyPSC0 ip=192.168.0.254 panic=10 root=/dev/nfs nfs root=192.168.0.1:/nfsroot/efika MPC52xx PIC: MPC52xx PIC Remapped at 0xf0000500 MPC52xx PIC: MPC52xx SDMA Remapped at 0xf0001200 MPC52xx PIC is up and running! PID hash table entries: 512 (order: 9, 2048 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 126292k/131072k available (2948k kernel code, 4636k reserved, 292k data, 146k bss, 172k init) Mount-cache hash table entries: 512 NET: Registered protocol family 16 Efika : Added pic@f0000500 (type 'interrupt-controller' at '/builtin@F0000000/pi c@F0000500') to the known devices Efika : Added bestcomm@f0001200 (type 'dma-controller' at '/builtin@F0000000/bes tcomm@F0001200') to the known devices Efika : Added sram@f0008000 (type 'memory' at '/builtin@F0000000/sram@F0008000') to the known devices Efika : Added ata@f0003a00 (type 'ata' at '/builtin@F0000000/ata@F0003A00') to t he known devices Efika : Added usb@f0001000 (type 'usb' at '/builtin@F0000000/usb@F0001000') to t he known devices Efika : Added ethernet@f0003000 (type 'network' at '/builtin@F0000000/ethernet@F 0003000') to the known devices Efika : Added sound@f0002200 (type 'sound' at '/builtin@F0000000/sound@F0002200' ) to the known devices Efika : Added serial@f0002000 (type 'serial' at '/builtin@F0000000/serial@F00020 00') to the known devices Efika : Added pcidma@f0003800 (type 'dma-controller' at '/builtin@F0000000/pcidm a@F0003800') to the known devices PCI: Probing PCI hardware SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 4096 bind 2048) TCP reno registered audit: initializing netlink socket (disabled) audit(1172010880.308:1): initialized io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Generic RTC Driver v1.07 Macintosh non-volatile memory driver v1.1 Serial: MPC52xx PSC UART driver serial@f0002000: ttyPSC0 at MMIO 0xf0002000 (irq = 129) is a MPC52xx PSC RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) MPC52xx/OpenFirmware: 13696 kB of free SRAM eth0: Phy @ 0x10, type GENERIC (0x00008201) ata: MPC52xx IDE/ATA libata driver ata1: PATA max PIO4 cmd 0x0 ctl 0xC9012A5C bmdma 0x0 irq 135 scsi0 : mpc52xx_ata ppc-of-ohci usb@f0001000: USB Host Controller ppc-of-ohci usb@f0001000: new USB bus registered, assigned bus number 1 ppc-of-ohci usb@f0001000: irq 134, io mem 0xf0001000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usb 1-2: new low speed USB device using ppc-of-ohci and address 2 usb 1-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver usb-storage USB Mass Storage support registered. i8042.c: No controller found. mice: PS/2 mouse device common for all mice Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (1024 buckets, 8192 max) - 232 bytes per conntrack ctnetlink v0.90: registering with nfnetlink. ip_tables: (C) 2000-2006 Netfilter Core Team ClusterIP Version 0.8 loaded successfully arp_tables: (C) 2002 David S. Miller TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 eth0: config: auto-negotiation on, 100HDX, 10HDX. IP-Config: Guessing netmask 255.255.255.0 IP-Config: Complete: device=eth0, addr=192.168.0.254, mask=255.255.255.0, gw=255.255.255.255, host=192.168.0.254, domain=, nis-domain=(none), bootserver=255.255.255.255, rootserver=192.168.0.1, rootpath= Looking up port of RPC 100003/2 on 192.168.0.1 Looking up port of RPC 100005/1 on 192.168.0.1 VFS: Mounted root (nfs filesystem) readonly. Freeing unused kernel memory: 172k init INIT: version 2.86 booting Gentoo Linux; http://www.gentoo.org/ Copyright 1999-2006 Gentoo Foundation; Distributed under the GPLv2 Press I to enter interactive boot mode * Mounting proc at /proc ... [ ok ] * Mounting sysfs at /sys ... [ ok ] * Mounting devpts at /dev/pts ... [ ok ] * Remounting root filesystem read/write ... [ ok ] * Updating /etc/modules.conf ... [ ok ] * Updating /etc/modprobe.conf ... [ ok ] * Updating modules.dep ... [ ok ] * Using /etc/modules.autoload.d/kernel-2.6 as config: * Loading module soundcore ... [ ok ] * Loading module snd-pcm ... [ ok ] * Loading module snd-ac97-codec ... [ ok ] * Loading module snd-mpc52xx-ac97 ... [ ok ] * Autoloaded 4 module(s) * Checking all filesystems ... [ ok ] * Mounting local filesystems ... [ ok ] * Mounting USB device filesystem (usbfs) ... [ ok ] * Activating (possible) swap ... [ ok ] * Setting system clock using the hardware clock [UTC] ... [ ok ] * Configuring kernel parameters ... [ ok ] * Updating environment ... [ ok ] * Cleaning /var/lock, /var/run ... [ ok ] * Cleaning /tmp directory ... [ ok ] * One of the files in /etc/{conf.d,init.d} or /etc/rc.conf * has a modification time in the future! * Caching service dependencies ... * Can't find service 'portmap' needed by 'n etmount'; continuing... [ ok ] * Setting hostname to localhost ... [ ok ] * Loading ALSA modules ... [ ok ] * Restoring Mixer Levels ... * No mixer config in /etc/asound.state, you have to unmute your card! [ ok ] * Loading key mappings ... [ ok ] * Setting terminal encoding to ASCII ... [ ok ] * Setting user font ... [ ok ] * Starting lo * Bringing up lo * 127.0.0.1/8 [ ok ] * Adding routes * 127.0.0.0/8 ... [ ok ] * Initializing random number generator ... [ ok ] INIT: Entering runlevel: 3 * Starting dropbear ... [ ok ] portmap * ERROR: Some services needed are missing. Run * './netmount broken' for a list of those * services. netmount was not started. * Starting local ... [ ok ] This is localhost.(none) (Linux ppc 2.6.19-efika-r5-efika) 22:35:41 localhost login: kernel Modules ------------------------- # lsmod Module Size Used by snd_mpc52xx_ac97 9856 0 snd_ac97_codec 109484 1 snd_mpc52xx_ac97 snd_ac97_bus 2080 1 snd_ac97_codec snd_pcm 77508 2 snd_mpc52xx_ac97,snd_ac97_codec snd_timer 21604 1 snd_pcm snd 49796 4 snd_mpc52xx_ac97,snd_ac97_codec,snd_pcm,snd_time r snd_page_alloc 8584 1 snd_pcm soundcore 6980 1 snd then I obtain these messages when dmesg: mpc52xx-psc-ac97 sound@f0002200: ac97 read ok: reg 0022 val 0000 mpc52xx-psc-ac97 sound@f0002200: ac97 write: reg 0022 val 0707 mpc52xx-psc-ac97 sound@f0002200: ac97 read: reg 0022 mpc52xx-psc-ac97 sound@f0002200: ac97 read ok: reg 0022 val 0004 mpc52xx-psc-ac97 sound@f0002200: ac97 write: reg 0022 val 0000 mpc52xx-psc-ac97 sound@f0002200: ac97 write: reg 003a val 2a20 mpc52xx-psc-ac97 sound@f0002200: ac97 write: reg 003a val 0a20 mpc52xx-psc-ac97 sound@f0002200: ac97 read: reg 003a mpc52xx-psc-ac97 sound@f0002200: ac97 read ok: reg 003a val 0a20 mpc52xx-psc-ac97 sound@f0002200: ac97 write: reg 003a val 3a20 mpc52xx-psc-ac97 sound@f0002200: ac97 read: reg 003a mpc52xx-psc-ac97 sound@f0002200: ac97 read ok: reg 003a val 3a20 mpc52xx-psc-ac97 sound@f0002200: ac97 write: reg 003a val 2a20 mpc52xx-psc-ac97 sound@f0002200: ac97 read: reg 003a mpc52xx-psc-ac97 sound@f0002200: ac97 read ok: reg 003a val 2a20 mpc52xx-psc-ac97 sound@f0002200: ac97 read: reg 0026 mpc52xx-psc-ac97 sound@f0002200: ac97 read ok: reg 0026 val 000f mpc52xx-psc-ac97 sound@f0002200: ac97 write: reg 0026 val 800f mpc52xx-psc-ac97 sound@f0002200: ac97 read: reg 0026 mpc52xx-psc-ac97 sound@f0002200: ac97 read ok: reg 0026 val 800f mpc52xx-psc-ac97 sound@f0002200: ac97 write: reg 0026 val 000f mpc52xx-psc-ac97 sound@f0002200: ac97 write: reg 002a val 2c11 mpc52xx-psc-ac97 sound@f0002200: ac97 write: reg 002a val 3c11