ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.10.0 (tagged release candidate #1) loading
ivtv:  Linux version: 2.6.20-ARCH SMP preempt mod_unload 686 
ivtv:  In case of problems please include the debug info between
ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
ivtv:  any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ
 20
ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039
tveeprom 5-0050: Hauppauge model 26032, rev C199, serial# 2979196
tveeprom 5-0050: tuner model is TCL 2002N 5H (idx 99, type 50)
tveeprom 5-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 5-0050: audio processor is CX25841 (idx 35)
tveeprom 5-0050: decoder processor is CX25841 (idx 28)
tveeprom 5-0050: has no radio, has IR receiver, has IR transmitter
ivtv0: Autodetected Hauppauge WinTV PVR-150
ivtv0: reopen i2c bus for IR-blaster support
tuner 5-0061: chip found @ 0xc2 (ivtv i2c driver #0)
cx25840 5-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0)
kobject_add failed for i2c-5 with -EEXIST, don't try to register things with the same name in the same directory.
 [<c0225045>] kobject_add+0x115/0x1b0
 [<c028ad1c>] device_add+0xbc/0x520
 [<f8d47578>] ivtv_xfer+0xa8/0x3c0 [ivtv]
 [<c0224cff>] kobject_get+0xf/0x20
 [<c0291020>] _request_firmware+0xf0/0x300
 [<c02912df>] request_firmware+0xf/0x20
 [<f8d66ba4>] cx25840_loadfw+0x24/0x210 [cx25840]
 [<f8b85378>] i2c_master_send+0x38/0x50 [i2c_core]
 [<f8d648cd>] cx25840_initialize+0x15d/0x2a0 [cx25840]
 [<f8d662c4>] cx25840_detect_client+0x234/0x260 [cx25840]
 [<f8b85b9e>] i2c_probe_address+0x3e/0x130 [i2c_core]
 [<f8b85e97>] i2c_probe+0x207/0x220 [i2c_core]
 [<f8d66090>] cx25840_detect_client+0x0/0x260 [cx25840]
 [<c028d273>] driver_create_file+0x33/0x50
 [<f8d66090>] cx25840_detect_client+0x0/0x260 [cx25840]
 [<f8b86399>] i2c_register_driver+0x79/0xa0 [i2c_core]
 [<c0144d9f>] sys_init_module+0x15f/0x1ad0
 [<c0225d8f>] prio_tree_insert+0x1f/0x250
 [<c0103200>] sysenter_past_esp+0x5d/0x81
 =======================
fw_register_device: device_register failed
cx25840 5-0044: unable to open firmware v4l-cx25840.fw
wm8775 5-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: Registered device video0 for encoder MPEG (4 MB)
ivtv0: Registered device video32 for encoder YUV (2 MB)
ivtv0: Registered device vbi0 for encoder VBI (1 MB)
ivtv0: Registered device video24 for encoder PCM audio (1 MB)
tuner 5-0061: type set to 50 (TCL 2002N)
ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
ivtv:  ====================  END INIT IVTV  ====================