1,5c1
< ;; This buffer is for notes you don't want to save, and for Lisp evaluation.
< ;; If you want to create a file, visit that file with C-x C-f,
< ;; then enter the text in that file's own buffer.
< 
< eb 17 23:01:20 temnozor syslogd 1.4.1#18ubuntu6: restart.
---
>     temnozor syslogd 1.4.1#18ubuntu6: restart.
42c38
<     temnozor kernel: [ ] Detected 1789.056 MHz processor.
---
>     temnozor kernel: [ ] Detected 1789.094 MHz processor.
49c45
<     temnozor kernel: [ ] Calibrating delay using timer specific routine.. 3580.24 BogoMIPS (lpj=7160488)
---
>     temnozor kernel: [ ] Calibrating delay using timer specific routine.. 3580.25 BogoMIPS (lpj=7160512)
192,194d187
<     temnozor kernel: [ ] ieee1394: Initialized config rom entry `ip1394'
<     temnozor kernel: [ ] ACPI: PCI Interrupt 0000:00:0a.1[A] -> Link [LNK2] -> GSI 10 (level, low) -> IRQ 10
<     temnozor kernel: [ ] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10]  MMIO=[d000c000-d000c7ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
197d189
<     temnozor kernel: [ ] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
199a192,212
>     temnozor kernel: [ ] ACPI: PCI Interrupt 0000:00:0d.2[C] -> Link [LNK1] -> GSI 11 (level, low) -> IRQ 11
>     temnozor kernel: [ ] ehci_hcd 0000:00:0d.2: EHCI Host Controller
>     temnozor kernel: [ ] ehci_hcd 0000:00:0d.2: new USB bus registered, assigned bus number 1
>     temnozor kernel: [ ] ieee1394: Initialized config rom entry `ip1394'
>     temnozor kernel: [ ] ehci_hcd 0000:00:0d.2: irq 11, io mem 0xd000c800
>     temnozor kernel: [ ] ehci_hcd 0000:00:0d.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>     temnozor kernel: [ ] usb usb1: configuration #1 chosen from 1 choice
>     temnozor kernel: [ ] hub 1-0:1.0: USB hub found
>     temnozor kernel: [ ] hub 1-0:1.0: 5 ports detected
>     temnozor kernel: [ ] ACPI: PCI Interrupt 0000:00:0a.1[A] -> Link [LNK2] -> GSI 10 (level, low) -> IRQ 10
>     temnozor kernel: [ ] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10]  MMIO=[d000c000-d000c7ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>     temnozor kernel: [ ] irq 11: nobody cared (try booting with the "irqpoll" option)
>     temnozor kernel: [ ]  <c01499a4> __report_bad_irq+0x24/0x80  <c0149a9d> note_interrupt+0x9d/0x270
>     temnozor kernel: [ ]  <dc8b0854> usb_hcd_irq+0x24/0x60 [usbcore]  <c0149323> handle_IRQ_event+0x33/0x60
>     temnozor kernel: [ ]  <c0149448> __do_IRQ+0xf8/0x110  <c0105c89> do_IRQ+0x19/0x30
>     temnozor kernel: [ ]  <c010408a> common_interrupt+0x1a/0x20 
>     temnozor kernel: [ ] handlers:
>     temnozor kernel: [ ] [pg0+474040368/1068901376] (usb_hcd_irq+0x0/0x60 [usbcore])
>     temnozor kernel: [ ] Disabling IRQ #11
>     temnozor kernel: [ ] usb 1-1: new high speed USB device using ehci_hcd and address 2
>     temnozor kernel: [ ] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
202c215
<     temnozor kernel: [ ] ohci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
---
>     temnozor kernel: [ ] ohci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
204,206c217,219
<     temnozor kernel: [ ] usb usb1: configuration #1 chosen from 1 choice
<     temnozor kernel: [ ] hub 1-0:1.0: USB hub found
<     temnozor kernel: [ ] hub 1-0:1.0: 3 ports detected
---
>     temnozor kernel: [ ] usb usb2: configuration #1 chosen from 1 choice
>     temnozor kernel: [ ] hub 2-0:1.0: USB hub found
>     temnozor kernel: [ ] hub 2-0:1.0: 3 ports detected
209c222
<     temnozor kernel: [ ] ohci_hcd 0000:00:0d.1: new USB bus registered, assigned bus number 2
---
>     temnozor kernel: [ ] ohci_hcd 0000:00:0d.1: new USB bus registered, assigned bus number 3
211,218d223
<     temnozor kernel: [ ] usb usb2: configuration #1 chosen from 1 choice
<     temnozor kernel: [ ] hub 2-0:1.0: USB hub found
<     temnozor kernel: [ ] hub 2-0:1.0: 2 ports detected
<     temnozor kernel: [ ] ACPI: PCI Interrupt 0000:00:0d.2[C] -> Link [LNK1] -> GSI 11 (level, low) -> IRQ 11
<     temnozor kernel: [ ] ehci_hcd 0000:00:0d.2: EHCI Host Controller
<     temnozor kernel: [ ] ehci_hcd 0000:00:0d.2: new USB bus registered, assigned bus number 3
<     temnozor kernel: [ ] ehci_hcd 0000:00:0d.2: irq 11, io mem 0xd000c800
<     temnozor kernel: [ ] ehci_hcd 0000:00:0d.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
221c226
<     temnozor kernel: [ ] hub 3-0:1.0: 5 ports detected
---
>     temnozor kernel: [ ] hub 3-0:1.0: 2 ports detected
224,227d228
<     temnozor kernel: [ ] usb 3-1: new high speed USB device using ehci_hcd and address 2
<     temnozor kernel: [ ] usb 3-1: configuration #1 chosen from 1 choice
<     temnozor kernel: [ ] hub 3-1:1.0: USB hub found
<     temnozor kernel: [ ] hub 3-1:1.0: 7 ports detected
233,242d233
<     temnozor kernel: [ ] usb 3-1.4: new full speed USB device using ehci_hcd and address 3
<     temnozor kernel: [ ] usb 3-1.4: configuration #1 chosen from 1 choice
<     temnozor kernel: [ ] usb 3-1.5: new full speed USB device using ehci_hcd and address 4
<     temnozor kernel: [ ] usb 3-1.5: configuration #1 chosen from 1 choice
<     temnozor kernel: [ ] usb 3-1.7: new low speed USB device using ehci_hcd and address 5
<     temnozor kernel: [ ] usb 3-1.7: configuration #1 chosen from 1 choice
<     temnozor kernel: [ ] Linux agpgart interface v0.101 (c) Dave Jones
<     temnozor kernel: [ ] agpgart: Detected Ati IGP320/M chipset
<     temnozor kernel: [ ] agpgart: AGP aperture is 64M @ 0xd4000000
<     temnozor kernel: [ ] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
244,253d234
<     temnozor kernel: [ ] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<     temnozor kernel: [ ] b44.c:v1.00 (Apr 7, 2006)
<     temnozor kernel: [ ] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
<     temnozor kernel: [ ] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNK3] -> GSI 11 (level, low) -> IRQ 11
<     temnozor kernel: [ ] eth0: Broadcom 4400 10/100BaseT Ethernet 00:03:25:0b:91:06
<     temnozor kernel: [ ] ieee80211_crypt: registered algorithm 'NULL'
<     temnozor kernel: [ ] ieee80211: 802.11 data/management/control stack, git-1.1.13
<     temnozor kernel: [ ] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
<     temnozor kernel: [ ] bcm43xx driver
<     temnozor kernel: [ ] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNK2] -> GSI 10 (level, low) -> IRQ 10
259a241
>     temnozor kernel: [ ] atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
262,263d243
<     temnozor kernel: [ ] parport: PnPBIOS parport detected.
<     temnozor kernel: [ ] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
266,270c246,249
<     temnozor kernel: [ ] ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 11
<     temnozor kernel: [ ] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNK7] -> GSI 11 (level, low) -> IRQ 11
<     temnozor kernel: [ ] atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
<     temnozor kernel: [ ] usbcore: registered new driver snd-usb-audio
<     temnozor kernel: [ ] usbcore: registered new driver hiddev
---
>     temnozor kernel: [ ] b44.c:v1.00 (Apr 7, 2006)
>     temnozor kernel: [ ] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
>     temnozor kernel: [ ] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNK3] -> GSI 11 (level, low) -> IRQ 11
>     temnozor kernel: [ ] eth0: Broadcom 4400 10/100BaseT Ethernet 00:03:25:0b:91:06
271a251,253
>     temnozor kernel: [ ] parport: PnPBIOS parport detected.
>     temnozor kernel: [ ] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>     temnozor kernel: [ ] Linux agpgart interface v0.101 (c) Dave Jones
273c255,266
<     temnozor kernel: [ ] cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f
---
>     temnozor kernel: [ ] agpgart: Detected Ati IGP320/M chipset
>     temnozor kernel: [ ] agpgart: AGP aperture is 64M @ 0xd4000000
>     temnozor kernel: [ ] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>     temnozor kernel: [ ] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>     temnozor kernel: [ ] ieee80211_crypt: registered algorithm 'NULL'
>     temnozor kernel: [ ] ieee80211: 802.11 data/management/control stack, git-1.1.13
>     temnozor kernel: [ ] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>     temnozor kernel: [ ] ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 11
>     temnozor kernel: [ ] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNK7] -> GSI 11 (level, low) -> IRQ 11
>     temnozor kernel: [ ] bcm43xx driver
>     temnozor kernel: [ ] ts: Compaq touchscreen protocol output
>     temnozor kernel: [ ] cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
278d270
<     temnozor kernel: [ ] ts: Compaq touchscreen protocol output
279a272,273
>     temnozor kernel: [ ] usb 1-1: device not accepting address 2, error -110
>     temnozor kernel: [ ] usb 1-1: new high speed USB device using ehci_hcd and address 3
285,296c279
<     temnozor kernel: [ ] drivers/usb/input/hid-core.c: timeout initializing reports
<     temnozor kernel: [ ] hiddev96: USB HID v1.10 Device [BeyondTel USB Phone] on usb-0000:00:0d.2-1.4
<     temnozor kernel: [ ] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0818
<     temnozor kernel: [ ] input: Microsoft Microsoft Wireless Optical Mouse® 1.0A as /class/input/input3
<     temnozor kernel: [ ] input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.0A] on usb-0000:00:0d.2-1.7
<     temnozor kernel: [ ] usbcore: registered new driver usbhid
<     temnozor kernel: [ ] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
<     temnozor kernel: [ ] usbcore: registered new driver usblp
<     temnozor kernel: [ ] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
<     temnozor kernel: [ ] NET: Registered protocol family 10
<     temnozor kernel: [ ] lo: Disabled Privacy Extensions
<     temnozor kernel: [ ] IPv6 over IPv4 tunneling driver
---
>     temnozor kernel: [ ] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNK2] -> GSI 10 (level, low) -> IRQ 10
302c285,289
<     temnozor kernel: [ ] eth1: no IPv6 routers present
---
>     temnozor kernel: [ ] usb 1-1: device not accepting address 3, error -110
>     temnozor kernel: [ ] usb 1-1: new high speed USB device using ehci_hcd and address 4
>     temnozor kernel: [ ] usb 1-1: device not accepting address 4, error -110
>     temnozor kernel: [ ] usb 1-1: new high speed USB device using ehci_hcd and address 5
>     temnozor kernel: [ ] usb 1-1: device not accepting address 5, error -110
336,344c323,353
<     temnozor anacron[4212]: Anacron 2.3 started on 2007-02-17
<     temnozor anacron[4212]: Will run job `cron.daily' in 5 min.
<     temnozor anacron[4212]: Jobs will be executed sequentially
<     temnozor /usr/sbin/cron[4238]: (CRON) INFO (pidfile fd = 3)
<     temnozor /usr/sbin/cron[4239]: (CRON) STARTUP (fork ok)
<     temnozor /usr/sbin/cron[4239]: (CRON) INFO (Running @reboot jobs)
<     temnozor anacron[4212]: Job `cron.daily' started
<     temnozor anacron[4407]: Updated timestamp for job `cron.daily' to 2007-02-17
<     temnozor exiting on signal 15
---
>     temnozor dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 17
>     temnozor anacron[4082]: Anacron 2.3 started on 2007-02-17
>     temnozor anacron[4082]: Will run job `cron.daily' in 5 min.
>     temnozor anacron[4082]: Jobs will be executed sequentially
>     temnozor /usr/sbin/cron[4108]: (CRON) INFO (pidfile fd = 3)
>     temnozor /usr/sbin/cron[4109]: (CRON) STARTUP (fork ok)
>     temnozor /usr/sbin/cron[4109]: (CRON) INFO (Running @reboot jobs)
>     temnozor dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 4
>     temnozor dhclient: No DHCPOFFERS received.
>     temnozor dhclient: No working leases in persistent database - sleeping.
>     temnozor ntpdate[4199]: can't find host ntp.ubuntu.com 
>     temnozor ntpdate[4199]: no servers can be used, exiting
>     temnozor kernel: [ ] NET: Registered protocol family 10
>     temnozor kernel: [ ] lo: Disabled Privacy Extensions
>     temnozor kernel: [ ] IPv6 over IPv4 tunneling driver
>     temnozor gconfd (cryosphere-4285): starting (version 2.16.0), pid 4285 user 'cryosphere'
>     temnozor gconfd (cryosphere-4285): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
>     temnozor gconfd (cryosphere-4285): Resolved address "xml:readwrite:/home/cryosphere/.gconf" to a writable configuration source at position 1
>     temnozor gconfd (cryosphere-4285): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
>     temnozor gconfd (cryosphere-4285): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 3
>     temnozor gconfd (cryosphere-4285): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 4
>     temnozor kernel: [ ] eth1: no IPv6 routers present
>     temnozor gconfd (cryosphere-4285): GConf server is not in use, shutting down.
>     temnozor gconfd (cryosphere-4285): Exiting
>     temnozor init: tty1 process (3462) killed by signal 15
>     temnozor init: tty2 process (3463) killed by signal 15
>     temnozor init: tty3 process (3464) killed by signal 15
>     temnozor init: tty4 process (3465) killed by signal 15
>     temnozor init: tty5 process (3466) killed by signal 15
>     temnozor init: tty6 process (3467) killed by signal 15
>     temnozor gdm[3851]: GDM detected a halt or restart in progress.
\ No newline at end of file