U-Boot 1.1.2 (Aug 28 2005 - 13:37:25) QNAP System, Inc. CPU: MPC8245 Revision 1.4 at 266.666 MHz: 16 kB I-Cache 16 kB D-Cache Board: Sandpoint 8245 Unity ##Test not implemented yet## I2C: ready DRAM: 128 MB FLASH: S29GL128N, 16 MB In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 ## Booting image at ff000000 ... Image Name: QNAP Linux-2.6.12.3 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1964966 Bytes = 1.9 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK ## Loading RAMDisk Image at ff200000 ... Image Name: QNAP RAM Disk Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 2689297 Bytes = 2.6 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Ramdisk to 07c9c000, end 07f2c911 ... OK Linux version 2.6.12.3 (ken@NasPPC.qnap.com.tw) (gcc version 3.4.3) #1 Tue Aug 6 Motorola SPS Sandpoint Test Platform Port by QNAP Systems, Inc. (sales@qnap.com.tw) Built 1 zonelists Kernel command line: console=ttyS0,115200n8 root=/dev/ram init=/bin/sh OpenPIC Version 1.2 (1 CPUs and 10 IRQ sources) at fdf40000 PID hash table entries: 1024 (order: 10, 16384 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 122880k available (2564k kernel code, 1388k data, 112k init, 0k highmem) Mount-cache hash table entries: 512 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 2626k freed NET: Registered protocol family 16 PCI: Probing PCI hardware PCI: Cannot allocate resource region 1 of device 0000:00:00.0 SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.22 [Flags: R/W]. i8042.c: No controller found. Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 1 ports, IRQ sharing disabled ttyS0 at MMIO 0x0 (irq = 25) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 40960K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 6.0.54-k2 Copyright (c) 1999-2004 Intel Corporation. libata(0000:00:0d.0): cache line size not set. Driver may not function libata 0000:00:0d.0: Applying R_ERR on DMA activate FIS errata fix create proc entry succeed! ata1: SATA max UDMA/100 cmd 0xC9000E80 ctl 0xC9000E8A bmdma 0xC9000E00 irq 16 ata2: SATA max UDMA/100 cmd 0xC9000EC0 ctl 0xC9000ECA bmdma 0xC9000E08 irq 16 ata1: no device found (phy stat 00000000) scsi0 : libata ata2: no device found (phy stat 00000000) scsi1 : libata physmap flash device: 1000000 at ff000000 phys_mapped_flash: Found 1 x16 devices at 0x0 in 8-bit bank Amd/Fujitsu Extended Query Table at 0x0040 phys_mapped_flash: CFI does not contain boot bank location. Assuming top. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. cmdlinepart partition parsing not available RedBoot partition parsing not available Using physmap partition definition Creating 7 MTD partitions on "phys_mapped_flash": 0x00f00000-0x00f40000 : "U-Boot" 0x00000000-0x00200000 : "Kernel" 0x00200000-0x00500000 : "RootFS1" 0x00500000-0x00e00000 : "RootFS2" 0x00e00000-0x00f00000 : "Vendor" 0x00f40000-0x00f60000 : "U-Boot Config" 0x00f60000-0x01000000 : "NAS Config" ehci_hcd 0000:00:0e.2: NEC Corporation USB 2.0 ehci_hcd 0000:00:0e.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0e.2: irq 17, io mem 0xbfffcf00 ehci_hcd 0000:00:0e.2: park 0 ehci_hcd 0000:00:0e.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected ohci_hcd 0000:00:0e.0: NEC Corporation USB ohci_hcd 0000:00:0e.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0e.0: irq 17, io mem 0xbfffe000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ohci_hcd 0000:00:0e.1: NEC Corporation USB (#2) ohci_hcd 0000:00:0e.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:0e.1: irq 17, io mem 0xbfffd000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. create proc entry succeed! md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 1024 buckets, 8Kbytes TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 4 NET: Registered protocol family 5 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 112k init BusyBox v1.01 (2006.08.22-10:13+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands. /bin/sh: can't access tty; job control turned off