Linux version 2.6.18-rc5 (root@slax) (gcc version 3.4.6) #4 SMP Mon Sep 18 17:58 :52 GMT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f690000 (usable) BIOS-e820: 000000003f690000 - 000000003f698000 (ACPI data) BIOS-e820: 000000003f698000 - 000000003f700000 (ACPI NVS) BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 118MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f66b0 On node 0 totalpages: 259728 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 30352 pages, LIFO batch:7 DMI 2.4 present. ACPI: RSDP (v000 PTLTD ) @ 0x000f6600 ACPI: RSDT (v001 GATEWA SYSTEM 0x20061027 LTP 0x00000000) @ 0x3f691a6e ACPI: FADT (v001 GATEWA SYSTEM 0x20061027 LOHR 0x0000005a) @ 0x3f697e20 ACPI: MADT (v001 GATEWA SYSTEM 0x20061027 LOHR 0x0000005a) @ 0x3f697e94 ACPI: HPET (v001 GATEWA SYSTEM 0x20061027 LOHR 0x0000005a) @ 0x3f697efc ACPI: MCFG (v001 GATEWA SYSTEM 0x20061027 LOHR 0x0000005a) @ 0x3f697f34 ACPI: MADT (v001 GATEWA SYSTEM 0x20061027 LTP 0x00000000) @ 0x3f697f70 ACPI: BOOT (v001 GATEWA SYSTEM 0x20061027 LTP 0x00000001) @ 0x3f697fd8 ACPI: SSDT (v001 GATEWA SYSTEM 0x00003000 INTL 0x20050228) @ 0x3f691aae ACPI: DSDT (v001 GATEWA SYSTEM 0x20061027 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: 2 duplicate APIC table ignored. ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:14 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:14 APIC version 20 WARNING: maxcpus limit of 1 reached. Processor ignored. ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) Detected 1596.669 MHz processor. Built 1 zonelists. Total pages: 259728 Kernel command line: max_loop=255 initrd=boot/initrd.gz vga=0x317 maxcpus=1 nodh cp init=linuxrc load_ramdisk=1 prompt_ramdisk=0 ramdisk_size=4444 root=/dev/ram0 rw BOOT_IMAGE=boot/vmlinuz mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1018636k/1038912k available (4686k kernel code, 19612k reserved, 3450k d ata, 324k init, 121408k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Using HPET for base-timer Calibrating delay using timer specific routine.. 3196.64 BogoMIPS (lpj=6393284) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 0 0000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000940 0000c189 0000000 0 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 20k freed ACPI: Core revision 20060707 CPU0: Intel Genuine Intel(R) CPU T2050 @ 1.60GHz stepping 08 Total of 1 processors activated (3196.64 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Brought up 1 CPUs migration_cost=0 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 1769k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #05 (-#08) is hidden behind transparent bridge #04 (-#05) (try 'pci=ass ign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) ACPI: Embedded Controller [EC0] (gpe 23) interrupt mode. Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1c.0 IO window: 2000-2fff MEM window: d4000000-d5ffffff PREFETCH window: d0000000-d1ffffff PCI: Bridge: 0000:00:1c.1 IO window: 3000-3fff MEM window: d6000000-d7ffffff PREFETCH window: d2000000-d3ffffff PCI: Bus 5, cardbus bridge: 0000:04:09.0 IO window: 00004000-000040ff IO window: 00004400-000044ff PREFETCH window: 50000000-51ffffff MEM window: 52000000-53ffffff PCI: Bridge: 0000:00:1e.0 IO window: 4000-4fff MEM window: d8000000-d80fffff PREFETCH window: 50000000-51ffffff ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Enabling device 0000:00:1e.0 (0004 -> 0007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:04:09.0[A] -> GSI 17 (level, low) -> IRQ 16 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Simple Boot Flag at 0x36 set to 0x1 apm: BIOS not found. highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) NTFS driver 2.1.27 [Flags: R/O]. JFS: nTxBlock = 7974, nTxLock = 63794 SGI XFS with ACLs, security attributes, large block numbers, no debug enabled SGI XFS Quota Management subsystem Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] Allocate Port Service[0000:00:1c.1:pcie03] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 vesafb: framebuffer at 0xc0000000, mapped to 0xf8d00000, using 6144k, total 7872 k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: protected mode interface info at 00ff:44f0 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6>...no good signature found . Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Sleep Button (CM) [SLPB] ACPI: Lid Switch [LID] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [ 20060707] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [ 20060707] ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Getting cpuindex for acpiid 0x1 ACPI: Thermal Zone [TZ00] (30 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 4444K size 1024 blocksize loop: loaded (max 255 devices) Compaq SMART2 Driver (v 2.6.0) HP CISS Driver (v 2.6.10) input: Macintosh mouse button emulation as /class/input/input0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH7: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 19 (level, low) -> IRQ 18 ICH7: chipset revision 2 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... hda: HL-DT-ST DVD-RW GWA-4082N, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide Loading Adaptec I2O RAID: Version 2.4 Build 5go Detecting Adaptec I2O RAID controllers... Adaptec aacraid driver (1.1-5[2409]-mh2) scsi: Detection failed (no card) sym53c416.c: Version 1.0.0-ac qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver Emulex LightPulse Fibre Channel SCSI driver 8.1.9 Copyright(c) 2004-2006 Emulex. All rights reserved. Failed initialization of WD-7000 SCSI card! megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006) megasas: 00.00.03.01 Sun May 14 22:49:52 PDT 2006 GDT-HA: Storage RAID Controller Driver. Version: 3.05 GDT-HA: Found 0 PCI Storage RAID Controllers 3ware Storage Controller device driver for Linux v1.26.02.001. 3ware 9000 Storage Controller device driver for Linux v2.26.02.007. nsp32: loading... ipr: IBM Power RAID SCSI Device Driver version: 2.1.3 (March 29, 2006) libata version 2.00 loaded. ahci 0000:00:1f.2: version 2.0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ata1: SATA max UDMA/133 cmd 0xF8CBC500 ctl 0x0 bmdma 0x0 irq 18 ata2: SATA max UDMA/133 cmd 0xF8CBC580 ctl 0x0 bmdma 0x0 irq 18 ata3: SATA max UDMA/133 cmd 0xF8CBC600 ctl 0x0 bmdma 0x0 irq 18 ata4: SATA max UDMA/133 cmd 0xF8CBC680 ctl 0x0 bmdma 0x0 irq 18 scsi2 : ahci ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7, max UDMA/100, 234441648 sectors: LBA48 NCQ (depth 31/32) ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/100 scsi3 : ahci ata2: SATA link down (SStatus 0 SControl 0) scsi4 : ahci ata3: SATA link down (SStatus 0 SControl 300) scsi5 : ahci ata4: SATA link down (SStatus 0 SControl 0) Vendor: ATA Model: FUJITSU MHV2120B Rev: 0000 Type: Direct-Access ANSI SCSI revision: 05 st: Version 20050830, fixed bufsize 32768, s/g segs 256 SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sd 2:0:0:0: Attached scsi disk sda I2O subsystem v1.325 i2o: max drivers = 8 I2O Configuration OSM v1.323 I2O Bus Adapter OSM v1.317 I2O Block Device OSM v1.325 I2O SCSI Peripheral OSM v1.316 I2O ProcFS OSM v1.316 Fusion MPT base driver 3.04.01 Copyright (c) 1999-2005 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.01 Fusion MPT FC Host driver 3.04.01 Fusion MPT SAS Host driver 3.04.01 usbmon: debugfs is not available usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 raid6: int32x1 571 MB/s raid6: int32x2 671 MB/s raid6: int32x4 464 MB/s raid6: int32x8 443 MB/s raid6: mmxx1 1613 MB/s raid6: mmxx2 1759 MB/s raid6: sse1x1 1203 MB/s raid6: sse1x2 1654 MB/s raid6: sse2x1 1825 MB/s raid6: sse2x2 1981 MB/s raid6: using algorithm sse2x2 (1981 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 4147.000 MB/sec raid5: using function: pIII_sse (4147.000 MB/sec) md: multipath personality registered for level -4 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode md: Autodetecting RAID arrays. Time: tsc clocksource has been installed. md: autorun ... Time: hpet clocksource has been installed. md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). Freeing unused kernel memory: 324k freed input: AT Translated Set 2 keyboard as /class/input/input1 squashfs: version 3.1 (2006/08/19) Phillip Lougher aufs 2.6.17+18rc4-20060821 ISO 9660 Extensions: Microsoft Joliet Level 3 ISOFS: changing to secondary root aufs test_add:305:exe[2226]: different uid/gid/permission, memory/images/bin.mo aufs test_add:305:exe[2269]: different uid/gid/permission, memory/images/etc.mo aufs test_add:305:exe[2312]: different uid/gid/permission, memory/images/home.mo aufs test_add:305:exe[2355]: different uid/gid/permission, memory/images/lib.mo aufs test_add:305:exe[2398]: different uid/gid/permission, memory/images/opt.mo aufs test_add:305:exe[2441]: different uid/gid/permission, memory/images/root.mo aufs test_add:305:exe[2484]: different uid/gid/permission, memory/images/sbin.mo aufs test_add:305:exe[2527]: different uid/gid/permission, memory/images/usr.mo aufs test_add:305:exe[2570]: different uid/gid/permission, memory/images/var.mo bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 87540 byt es,<6>...found (1024x768, 87432 bytes, v3). bootsplash: status on console 0 changed to on input: ImPS/2 Synaptics TouchPad as /class/input/input2 lp: driver loaded but no devices found Linux agpgart interface v0.101 (c) Dave Jones Capability LSM initialized NTFS volume version 3.1. Intel ISA PCIC probe: not found. Databook TCIC-2 PCMCIA probe: not found. Yenta: CardBus bridge found at 0000:04:09.0 [107b:0366] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:04:09.0, mfunc 0x01ac1b22, devctl 0x64 Yenta: ISA IRQ mask 0x0cf8, PCI irq 16 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#04) from #05 to #08 pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff cs: IO port probe 0x4000-0x4fff: clean. pcmcia: parent PCI bridge Memory window: 0xd8000000 - 0xd80fffff pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff pcmcia: Detected deprecated PCMCIA ioctl usage from process: cardmgr. pcmcia: This interface will soon be removed from the kernel; please expect break age unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0x800-0x80f: clean. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0xa00-0xaff: clean. ieee1394: Initialized config rom entry `ip1394' PCI: Enabling device 0000:04:09.1 (0000 -> 0002) ACPI: PCI Interrupt 0000:04:09.1[B] -> GSI 18 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:04:09.1 to 64 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[d8005000-d80057ff] Max Packet=[2048] IR/IT contexts=[4/8] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:02:00.0 to 64 sky2 v1.5 addr 0xd4000000 irq 17 Yukon-FE (0xb7) rev 1 sky2 eth0: addr 00:e0:b8:ac:2f:c9 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 18 Intel 82802 RNG detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd8444000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0b8036601170b] USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice usb 1-2: new high speed USB device using ehci_hcd and address 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb 1-2: configuration #1 chosen from 1 choice ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 19, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 3-1: new low speed USB device using uhci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice input: USB Optical Mouse USB Optical Mouse as /class/input/input3 input: USB HID v1.10 Mouse [USB Optical Mouse USB Optical Mouse] on usb-0000:00: 1d.1-1 ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1b.0 to 64 agpgart: Detected an Intel 945GM Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xc0000000 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver mtrr: no more MTRRs available ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.1.0dm r ipw3945: Copyright(c) 2003-2006 Intel Corporation ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:03:00.0 to 64 ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels) ADDRCONF(NETDEV_UP): eth1: link is not ready ieee80211_crypt: registered algorithm 'WEP' ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready eth1: no IPv6 routers present