[Very Important] TE110P configuration
hi every body i hope someone answer me;
i have installed trixbox 1.2.3 with TE110P.
when i make "genzaptelconf" my card it's not detected
so i've download an other script of "genzaptelconf" from (wget http://svn.digium.com/svn/zaptel/branches/1.2/xpp/utils/genzaptelconf)
and my card is been detected.
i have for my primary access a "KELYMILE LECAR" modem, connected with the TE110P cards
the cable connect my TE110P to the modem has a schema bellow:
1-----------------4
2-----------------5
3-----------------3
4-----------------1
5-----------------2
6-----------------6
7-----------------7
8-----------------8
i get a signal of a red alarm
when i m runnig "zttool" i got a red alarm "RED"
this is y zapata-auto.conf:
********************
cat /etc/asterisk/zapata-auto.conf
; Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit
; Zaptel Channels Configurations (zapata.conf)
;
; This is not intended to be a complete zapata.conf. Rather, it is intended
; to be #include-d by /etc/zapata.conf that will include the global settings
;
callerid=asreceived

; Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" HDB3/CCS RED
; channel 1, WCT1, unhandled for now
; channel 2, WCT1, unhandled for now
; channel 3, WCT1, unhandled for now
; channel 4, WCT1, unhandled for now
; channel 5, WCT1, unhandled for now
; channel 6, WCT1, unhandled for now
; channel 7, WCT1, unhandled for now
; channel 8, WCT1, unhandled for now
; channel 9, WCT1, unhandled for now
; channel 10, WCT1, unhandled for now
; channel 11, WCT1, unhandled for now
; channel 12, WCT1, unhandled for now
; channel 13, WCT1, unhandled for now
; channel 14, WCT1, unhandled for now
; channel 15, WCT1, unhandled for now
; channel 16, WCT1, unhandled for now
; channel 17, WCT1, unhandled for now
; channel 18, WCT1, unhandled for now
; channel 19, WCT1, unhandled for now
; channel 20, WCT1, unhandled for now
; channel 21, WCT1, unhandled for now
; channel 22, WCT1, unhandled for now
; channel 23, WCT1, unhandled for now
; channel 24, WCT1, unhandled for now
; channel 25, WCT1, unhandled for now
; channel 26, WCT1, unhandled for now
; channel 27, WCT1, unhandled for now
; channel 28, WCT1, unhandled for now
; channel 29, WCT1, unhandled for now
; channel 30, WCT1, unhandled for now
; channel 31, WCT1, unhandled for now

; Span 2: ZTDUMMY/1 "ZTDUMMY/1 1"
************************************
my zapata.conf
*****************
[root@asterisk1 ~]# cat /etc/asterisk/zapata.conf
;
; Zapata telephony interface
;
; Configuration file

[trunkgroups]

[channels]

language=en
context=from-zaptel
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes

usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no

;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no

;Include genzaptelconf configs
#include zapata-auto.conf

group=1

;Include AMP configs
#include zapata_additional.conf

**********************
And My zaptel.conf
***********************
[root@asterisk1 ~]# cat /etc/zaptel.conf
# Autogenerated by ./genzaptelconf -- do not hand edit
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#

# It must be in the module loading order


# Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0"
span=1,1,1,ccs,hdb3
bchan=1-15,17-31
dchan=16

# Global data

loadzone = us
defaultzone = us
***********************

ANY HELP PLEASE