localhost download # cdrecord dev=/dev/hdc -v -dao -eject -audio -pad *.wav
Cdrecord-ProDVD-Clone 2.01.01a10 (i686-pc-linux-gnu) Copyright (C) 1995-2006 Jörg Schilling
TOC Type: 0 = CD-DA
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
SCSI buffer size: 64512
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'LITE-ON '
Identifikation : 'DVDRW SOHW-1693S'
Revision       : 'KS04'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: CD-R
Profile: DVD+R/DL
Profile: DVD+R
Profile: DVD+RW
Profile: DVD-R/DL sequential recording
Profile: DVD-RW sequential overwrite
Profile: DVD-RW restricted overwrite
Profile: DVD-R sequential recording
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R (current)
Profile: CD-ROM
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1895168 = 1850 KB
FIFO size      : 4194304 = 4096 KB
Track 01: audio   58 MB (05:47.58) no preemp pad
Total size:       58 MB (05:47.58) = 26069 sectors
Lout start:       58 MB (05:49/44) = 26069 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 4
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type A, high Beta category (A+) (3)
  ATIP start of lead in:  -11849 (97:24/01)
  ATIP start of lead out: 359847 (79:59/72)
Disk type:    Long strategy type (Cyanine, AZO or similar)
Manuf. index: 25
Manufacturer: Taiyo Yuden Company Limited
Blocks total: 359847 Blocks current: 359847 Blocks remaining: 333778
Forcespeed is OFF.
Starting to write CD/DVD at speed 48 in real SAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Performing OPC...
Sending CUE sheet...
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01:    0 of   58 MB written.cdrecord: Success. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 00 00 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 08 03 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x08 Qual 0x03 (logical unit communication crc error (ultra-dma/32)) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63504
cmd finished after 0.196s timeout 200s

write track data: error after 0 bytes
cdrecord: A write error occured.
cdrecord: Please properly read the error message above.
Writing  time:   16.399s
Average write speed  46.4x.
Fixating...
Fixating time:    9.596s
cdrecord: fifo had 64 puts and 1 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.