Linux version 2.6.20-gentoo-kvm (root@vodka) (gcc version 4.1.1 (Gentoo 4.1.1)) #1 SMP PREEMPT Sun Feb 18 18:15:58 CET 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000007feb0000 end: 000000007ffb0000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000007ffb0000 size: 000000000000e000 end: 000000007ffbe000 type: 3 copy_e820_map() start: 000000007ffbe000 size: 0000000000032000 end: 000000007fff0000 type: 4 copy_e820_map() start: 000000007fff0000 size: 0000000000010000 end: 0000000080000000 type: 2 copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2 copy_e820_map() start: 00000000fee00000 size: 0000000000100000 end: 00000000fef00000 type: 2 copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable) BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data) BIOS-e820: 000000007ffbe000 - 000000007fff0000 (ACPI NVS) BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 2047MB LOWMEM available. found SMP MP-table at 000ff780 Entering add_active_range(0, 0, 524208) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 524208 HighMem 524208 -> 524208 early_node_map[1] active PFN ranges 0: 0 -> 524208 On node 0 totalpages: 524208 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 4063 pages used for memmap Normal zone: 516049 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap DMI present. ACPI: RSDP (v000 ACPIAM ) @ 0x000fbea0 ACPI: RSDT (v001 A M I OEMRSDT 0x11000613 MSFT 0x00000097) @ 0x7ffb0000 ACPI: FADT (v002 A M I OEMFACP 0x11000613 MSFT 0x00000097) @ 0x7ffb0200 ACPI: MADT (v001 A M I OEMAPIC 0x11000613 MSFT 0x00000097) @ 0x7ffb0390 ACPI: MCFG (v001 A M I OEMMCFG 0x11000613 MSFT 0x00000097) @ 0x7ffb0400 ACPI: BOOT (v001 A M I OEMBOOT 0x11000613 MSFT 0x00000097) @ 0x7ffb0440 ACPI: OEMB (v001 A M I AMI_OEM 0x11000613 MSFT 0x00000097) @ 0x7ffbe040 ACPI: TCPA (v001 A M I TBLOEMID 0x00000001 MSFT 0x00000097) @ 0x7ffb8cb0 ACPI: DSDT (v001 A0427 A0427000 0x00000000 INTL 0x02002026) @ 0x00000000 Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:8 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:8 APIC version 16 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) Detected 1607.322 MHz processor. Built 1 zonelists. Total pages: 520113 Kernel command line: root=/dev/ram0 init=/linuxrc real_root=/dev/sda3 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes) Inode-cache hash table entries: 131072 (order: 7, 524288 bytes) Memory: 2072912k/2096832k available (2353k kernel code, 23316k reserved, 768k data, 224k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff9d000 - 0xfffff000 ( 392 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0x78000000 - 0xf7fb0000 (2047 MB) .init : 0x78413000 - 0x7844b000 ( 224 kB) .data : 0x7834c7bb - 0x7840c7d4 ( 768 kB) .text : 0x78100000 - 0x7834c7bb (2353 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3216.63 BogoMIPS (lpj=1608315) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0(2) -> Core 0 CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20060707 CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping 02 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3214.18 BogoMIPS (lpj=1607092) CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1(2) -> Core 1 CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping 02 Total of 2 processors activated (6430.81 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 checking TSC synchronization across 2 CPUs: CPU#0 had -51 usecs TSC skew, fixed it up. CPU#1 had 51 usecs TSC skew, fixed it up. Brought up 2 CPUs migration_cost=192 Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing Error attaching device data Error attaching device data ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:04:00.0 PCI: Transparent bridge - 0000:00:10.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 16) *5 ACPI: PCI Interrupt Link [LNKB] (IRQs 17) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [LNEA] (IRQs 18) *11 ACPI: PCI Interrupt Link [LNEB] (IRQs 19) *11 ACPI: PCI Interrupt Link [LNEC] (IRQs 5) *0, disabled. ACPI: PCI Interrupt Link [LNED] (IRQs 11) *0, disabled. ACPI: PCI Interrupt Link [LUB0] (IRQs 10) *11 ACPI: PCI Interrupt Link [LUB2] (IRQs 20) *7 ACPI: PCI Interrupt Link [LMAC] (IRQs 21) *5 ACPI: PCI Interrupt Link [LAZA] (IRQs 22) *5 ACPI: PCI Interrupt Link [LACI] (IRQs 22) *0, disabled. ACPI: PCI Interrupt Link [LMC9] (IRQs 7) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 7) *5 ACPI: PCI Interrupt Link [LPMU] (IRQs 7) *10 ACPI: PCI Interrupt Link [LSA0] (IRQs 23) *10 ACPI: PCI Interrupt Link [LSA1] (IRQs 23) *0, disabled. ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 13 devices SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:07: ioport range 0x25c-0x25f has been reserved PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: dc700000-dc7fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: d000-dfff MEM window: dc800000-dcffffff PREFETCH window: be000000-bfffffff PCI: Bridge: 0000:00:04.0 IO window: e000-efff MEM window: dd000000-dfefffff PREFETCH window: c0000000-cfffffff PCI: Bridge: 0000:00:10.0 IO window: disabled. MEM window: dff00000-dfffffff PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:00:10.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 6, 262144 bytes) TCP established hash table entries: 262144 (order: 9, 3145728 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 1639k freed Simple Boot Flag at 0x4c set to 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. squashfs: version 3.2 (2007/01/02) Phillip Lougher io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] PCI: Setting latency timer of device 0000:00:04.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:04.0:pcie00] ACPI: AC Adapter [AC0] (on-line) ACPI: Battery Slot [BAT0] (battery present) input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input1 ACPI: Sleep Button (CM) [SLPB] input: Lid Switch as /class/input/input2 ACPI: Lid Switch [LID] input: Power Button (CM) as /class/input/input3 ACPI: Power Button (CM) [PWRB] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) Using specific hotkey driver ACPI: Thermal Zone [TZ00] (60 C) Asus Laptop ACPI Extras version 0.30 unsupported model F3T, trying default values send /proc/acpi/dsdt to the developers Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59. ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 21 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:14.0 to 64 forcedeth: using HIGHDMA eth0: forcedeth.c: subsystem: 01043:1385 bound to 0000:00:14.0 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input4 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0 NFORCE-MCP51: chipset revision 161 NFORCE-MCP51: not 100% native mode: will probe irqs later NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... input: PS/2 Mouse as /class/input/input5 input: AlpsPS/2 ALPS GlidePoint as /class/input/input6 Probing IDE interface ide1... hdc: TSSTcorpCD/DVDW TS-L632D, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide0... hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 I2O subsystem v1.325 i2o: max drivers = 8 i2c /dev entries driver i2c_adapter i2c-0: nForce2 SMBus adapter at 0x600 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x700 Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC). ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 22 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:10.1 to 64 ALSA device list: #0: HDA NVidia at 0xdc6b8000 irq 17 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 2 AMD Turion(tm) 64 X2 Mobile Technology TL-52 processors (version 2.00.00) powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x13 powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x1e powernow-k8: ph2 null fid transition 0x8 Starting balanced_irq Using IPI No-Shortcut mode ACPI: (supports S0 S1 S3 S4 S5) Freeing unused kernel memory: 224k freed usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUB2] -> GSI 20 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:0b.1 to 64 ehci_hcd 0000:00:0b.1: EHCI Host Controller ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0b.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:0b.1 ehci_hcd 0000:00:0b.1: irq 18, io mem 0xdc6bfc00 ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected Initializing USB Mass Storage driver... usb 1-7: new high speed USB device using ehci_hcd and address 3 usb 1-7: configuration #1 chosen from 1 choice usbcore: registered new interface driver usb-storage USB Mass Storage support registered. USB Universal Host Controller Interface driver v3.0 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:0b.0 to 64 ohci_hcd 0000:00:0b.0: OHCI Host Controller ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0b.0: irq 10, io mem 0xdc6be000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected usb 2-3: new low speed USB device using ohci_hcd and address 2 usb 2-3: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Logitech USB-PS/2 Optical Mouse as /class/input/input7 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-3 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver sl811: driver sl811-hcd, 19 May 2005 ieee1394: Initialized config rom entry `ip1394' ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 16 ACPI: PCI Interrupt 0000:05:01.0[A] -> Link [LNKA] -> GSI 16 (level, low) -> IRQ 19 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[dfffe800-dfffefff] Max Packet=[2048] IR/IT contexts=[4/4] libata version 2.00 loaded. sata_nv 0000:00:0e.0: version 3.2 ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:0e.0 to 64 ata1: SATA max UDMA/133 cmd 0xC800 ctl 0xC482 bmdma 0xC000 irq 20 ata2: SATA max UDMA/133 cmd 0xC400 ctl 0xC082 bmdma 0xC008 irq 20 scsi0 : sata_nv ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7, max UDMA/133, 234441648 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/133 scsi1 : sata_nv ata2: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0xC407 scsi 0:0:0:0: Direct-Access ATA ST9120822AS 3.AL PQ: 0 ANSI: 5 SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 0:0:0:0: Attached scsi disk sda ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800037b5f20] kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. EXT3 FS on sda3, internal journal nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 18 ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [LNEA] -> GSI 18 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:04:00.0 to 64 NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8776 Mon Oct 16 21:56:04 PDT 2006 ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) wlan: 0.8.4.2 (svn r2119) ath_pci: 0.9.4.5 (svn r2119) ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:01:00.0 to 64 ath_rate_sample: 1.2 (svn r2119) wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: H/W encryption support: WEP AES AES_CCM TKIP wifi0: mac 10.0 phy 6.1 radio 10.2 wifi0: Use hw queue 1 for WME_AC_BE traffic wifi0: Use hw queue 0 for WME_AC_BK traffic wifi0: Use hw queue 2 for WME_AC_VI traffic wifi0: Use hw queue 3 for WME_AC_VO traffic wifi0: Use hw queue 8 for CAB traffic wifi0: Use hw queue 9 for beacons wifi0: Atheros 5424/2424: mem=0xdc7f0000, irq=22 kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 489940k swap on /dev/sda5. Priority:-1 extents:1 across:489940k Real Time Clock Driver v1.12ac **WARNING** I2C adapter driver [NVIDIA I2C Device] forgot to specify physical device; fix it! **WARNING** I2C adapter driver [NVIDIA I2C Device] forgot to specify physical device; fix it! **WARNING** I2C adapter driver [NVIDIA I2C Device] forgot to specify physical device; fix it!