smartctl version 5.37 [x86_64-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Maxtor DiamondMax 10 family (ATA/133 and SATA/150) Device Model: Maxtor 6B250R0 Serial Number: B60DS7AH Firmware Version: BAH41B70 User Capacity: 251,000,193,024 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0 Local Time is: Thu Mar 8 12:44:17 2007 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (1982) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 100) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 3 Spin_Up_Time 0x0027 179 178 063 Pre-fail Always - 20819 4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 68 5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always - 5 6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0 7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0 8 Seek_Time_Performance 0x0027 243 230 187 Pre-fail Always - 52249 9 Power_On_Minutes 0x0032 197 197 000 Old_age Always - 857h+47m 10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail Always - 0 11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 253 253 000 Old_age Always - 74 192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0 193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0 194 Temperature_Celsius 0x0032 049 253 000 Old_age Always - 57 195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 49437 196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0 197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 0 198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age Offline - 0 200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 1 202 TA_Increase_Count 0x000a 253 251 000 Old_age Always - 0 203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 14 204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age Always - 0 205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age Always - 0 207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 0 208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0 209 Offline_Seek_Performnce 0x0024 241 241 000 Old_age Offline - 149 210 Unknown_Attribute 0x0032 253 252 000 Old_age Always - 0 211 Unknown_Attribute 0x0032 253 252 000 Old_age Always - 0 212 Unknown_Attribute 0x0032 253 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 8 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 8 occurred at disk power-on lifetime: 17892 hours (745 days + 12 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 5a 4a 08 55 5c 40 e0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- e0 00 08 55 5c 40 e0 00 9d+16:52:50.006 STANDBY IMMEDIATE e0 00 08 55 5c 40 e0 00 9d+16:52:48.476 STANDBY IMMEDIATE e0 00 08 35 23 24 e0 00 9d+16:52:47.967 STANDBY IMMEDIATE e0 00 18 1d 23 24 e0 00 9d+16:52:47.966 STANDBY IMMEDIATE e0 00 08 65 8c 3a e0 00 9d+16:52:47.965 STANDBY IMMEDIATE Error 7 occurred at disk power-on lifetime: 17892 hours (745 days + 12 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 5a 4a 08 55 5c 40 e0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- e0 00 08 55 5c 40 e0 00 9d+16:52:48.476 STANDBY IMMEDIATE e0 00 08 35 23 24 e0 00 9d+16:52:47.967 STANDBY IMMEDIATE e0 00 18 1d 23 24 e0 00 9d+16:52:47.966 STANDBY IMMEDIATE e0 00 08 65 8c 3a e0 00 9d+16:52:47.965 STANDBY IMMEDIATE e0 00 08 d5 ae 38 e0 00 9d+16:52:47.965 STANDBY IMMEDIATE Error 6 occurred at disk power-on lifetime: 17538 hours (730 days + 18 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 5a 4a 08 05 99 42 e0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- e0 00 08 05 99 42 e0 00 43d+13:26:44.268 STANDBY IMMEDIATE e0 00 08 05 99 42 e0 00 43d+13:26:42.750 STANDBY IMMEDIATE e0 00 08 cd 1f f1 e0 00 43d+13:26:42.446 STANDBY IMMEDIATE e0 00 08 25 05 c2 e0 00 43d+13:26:42.340 STANDBY IMMEDIATE e0 00 50 d5 04 c2 e0 00 43d+13:26:42.336 STANDBY IMMEDIATE SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 9960 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.