slk-apbx-03*CLI> pri intense debug span 1
Enabled EXTENSIVE debugging on span 1
    -- Executing Dial("SIP/3712-9e828300", "Zap/g1/8018280000") in new stack
    -- Requested transfer capability: 0x00 - SPEECH

> [ 00 01 7e c8 08 02 00 37 05 04 03 80 90 a2 18 04 e9 80 83 81 1e 02 80 83 28 0e b1 4c 65 78 69 6e 67 74 6f 6e 20 4c 61 77 6c 0c 00 81 38 30 30 34 35 38 34 36 39 30 70 0b 80 38 30 31 38 32 38 35 32 33 30 ]

> Informational frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
> N(S): 063   0: 0
> N(R): 100   P: 0
> 63 bytes of data
-- Restarting T203 counter
Stopping T_203 timer
Starting T_200 timer
> Protocol Discriminator: Q.931 (8)  len=63
> Call Ref: len= 2 (reference 55/0x37) (Originator)
> Message type: SETUP (5)
> [04 03 80 90 a2]
> Bearer Capability (len= 5) [ Ext: 1  Q.931 Std: 0  Info transfer capability: Speech (0)
>                              Ext: 1  Trans mode/rate: 64kbps, circuit-mode (16)
>                              Ext: 1  User information layer 1: u-Law (34)
> [18 04 e9 80 83 81]
> Channel ID (len= 6) [ Ext: 1  IntID: Explicit, PRI Spare: 0, Exclusive Dchan: 0
>                        ChanSel: Reserved
>                       Ext: 1  DS1 Identifier: 0
>                       Ext: 1  Coding: 0   Number Specified   Channel Type: 3
>                       Ext: 1  Channel: 1 ]
> [1e 02 80 83]>
> Progress Indicator (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0   Location: User (0)
>                               Ext: 1  Progress Description: Calling equipment is non-ISDN. (3) ]
> [28 0e b1 4c 65 78 69 6e 67 74 6f 6e 20 4c 61 77]
> Display (len=14) Charset: 31 [ blah ]
> [6c 0c 00 81 38 30 30 34 35 38 34 36 39 30]
> Calling Number (len=14) [ Ext: 0  TON: Unknown Number Type (0)  NPI: Unknown Number Plan (0)
>                           Presentation: Presentation permitted, user number passed network screening (1) '8004580000' ]
> [70 0b 80 38 30 31 38 32 38 35 32 33 30]
> Called Number (len=13) [ Ext: 1  TON: Unknown Number Type (0)  NPI: Unknown Number Plan (0) '8018285000' ]
    -- Called g1/8018280000
slk-apbx-03*CLI>
< [ 00 01 01 80 ]

< Supervisory frame:
< SAPI: 00  C/R: 0 EA: 0
<  TEI: 000        EA: 1
< Zero: 0     S: 0 01: 1  [ RR (receive ready) ]
< N(R): 064 P/F: 0
< 0 bytes of data
-- ACKing all packets from 62 to (but not including) 64
-- ACKing packet 63, new txqueue is -1 (-1 means empty)
-- Since there was nothing left, stopping T200 counter
-- Nothing left, starting T203 counter
-- Restarting T203 counter
slk-apbx-03*CLI>
< [ 02 01 c8 80 08 02 80 37 7d 08 03 82 e3 28 14 01 00 ]

< Informational frame:
< SAPI: 00  C/R: 1 EA: 0
<  TEI: 000        EA: 1
< N(S): 100   0: 0
< N(R): 064   P: 0
< 13 bytes of data
-- ACKing all packets from 63 to (but not including) 64
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
< Protocol Discriminator: Q.931 (8)  len=13
< Call Ref: len= 2 (reference 55/0x37) (Terminator)
< Message type: STATUS (125)
< [08 03 82 e3 28]
< Cause (len= 5) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0   Location: Public network serving the local user (2)
<                  Ext: 1  Cause: Info. element nonexist or not implemented (99), class = Protocol Error (6) ]
<              Cause data 1: 28 (40, Display IE)
< [14 01 00]
< Call State (len= 3) [ Ext: 0  Coding: CCITT (ITU) standard (0) Call state: Null (0)
Sending Receiver Ready (101)

> [ 02 01 01 ca ]

> Supervisory frame:
> SAPI: 00  C/R: 1 EA: 0
  TEI: 000        EA: 1
> Zero: 0     S: 0 01: 1  [ RR (receive ready) ]
> N(R): 101 P/F: 0
> 0 bytes of data
-- Restarting T203 counter
-- Restarting T203 counter
slk-apbx-03*CLI>
< [ 02 01 ca 80 08 02 80 37 02 18 04 e9 80 83 81 ]

< Informational frame:
< SAPI: 00  C/R: 1 EA: 0
<  TEI: 000        EA: 1
< N(S): 101   0: 0
< N(R): 064   P: 0
< 11 bytes of data
-- ACKing all packets from 63 to (but not including) 64
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
< Protocol Discriminator: Q.931 (8)  len=11
< Call Ref: len= 2 (reference 55/0x37) (Terminator)
< Message type: CALL PROCEEDING (2)
< [18 04 e9 80 83 81]
< Channel ID (len= 6) [ Ext: 1  IntID: Explicit, PRI Spare: 0, Exclusive Dchan: 0
<                        ChanSel: Reserved
<                       Ext: 1  DS1 Identifier: 0
<                       Ext: 1  Coding: 0   Number Specified   Channel Type: 3
<                       Ext: 1  Channel: 1 ]
Sending Receiver Ready (102)

> [ 02 01 01 cc ]

> Supervisory frame:
> SAPI: 00  C/R: 1 EA: 0
>  TEI: 000        EA: 1
> Zero: 0     S: 0 01: 1  [ RR (receive ready) ]
> N(R): 102 P/F: 0
> 0 bytes of data
-- Restarting T203 counter
-- Restarting T203 counter
    -- Zap/1-1 is proceeding passing it to SIP/3712-9e828300
slk-apbx-03*CLI>
< [ 02 01 cc 80 08 02 80 37 03 1e 02 82 88 ]

< Informational frame:
< SAPI: 00  C/R: 1 EA: 0
<  TEI: 000        EA: 1
< N(S): 102   0: 0
< N(R): 064   P: 0
< 9 bytes of data
-- ACKing all packets from 63 to (but not including) 64
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
< Protocol Discriminator: Q.931 (8)  len=9
< Call Ref: len= 2 (reference 55/0x37) (Terminator)
< Message type: PROGRESS (3)
< [1e 02 82 88]
< Progress Indicator (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0   Location: Public network serving the local user (2)
<                               Ext: 1  Progress Description: Inband information or appropriate pattern now available. (8) ]
Sending Receiver Ready (103)

> [ 02 01 01 ce ]

> Supervisory frame:
> SAPI: 00  C/R: 1 EA: 0
>  TEI: 000        EA: 1
> Zero: 0     S: 0 01: 1  [ RR (receive ready) ]
> N(R): 103 P/F: 0
> 0 bytes of data
-- Restarting T203 counter
-- Restarting T203 counter
    -- Zap/1-1 is making progress passing it to SIP/3712-9e828300
    -- Nobody picked up in 3000 ms
    -- Called SIP/3710
    -- Called SIP/3705
    -- Called SIP/3713
    -- Called SIP/3706
    -- Called SIP/3717
    -- Called SIP/3715
    -- Called SIP/3709
    -- Got SIP response 486 "Busy Here" back from 10.0.4.196
    -- SIP/3713-0090d470 is busy
    -- Got SIP response 486 "Busy Here" back from 10.0.4.193
    -- SIP/3705-0090a5c0 is busy
    -- Got SIP response 486 "Busy Here" back from 10.0.4.184
    -- SIP/3717-009ab770 is busy
    -- Got SIP response 486 "Busy Here" back from 10.0.4.182
    -- SIP/3706-00a008b0 is busy
T203 counter expired, sending RR and scheduling T203 again
Sending Receiver Ready (103)

> [ 00 01 01 cf ]

> Supervisory frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
> Zero: 0     S: 0 01: 1  [ RR (receive ready) ]
> N(R): 103 P/F: 1
> 0 bytes of data
-- Restarting T203 counter
    -- SIP/3710-009cafb0 is ringing
    -- SIP/3715-009ae620 is ringing
    -- SIP/3709-00a0b470 is ringing
slk-apbx-03*CLI>
< [ 00 01 01 81 ]
slk-apbx-03*CLI>
< Supervisory frame:
< SAPI: 00  C/R: 0 EA: 0
<  TEI: 000        EA: 1
< Zero: 0     S: 0 01: 1  [ RR (receive ready) ]
< N(R): 064 P/F: 1
< 0 bytes of data
-- ACKing all packets from 63 to (but not including) 64
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
-- Got RR response to our frame
-- Restarting T203 counter
slk-apbx-03*CLI>