<7>libata version 2.00 loaded. <7>pata_artop 0000:00:01.0: version 0.4.2 <4>PCI: enabling device 0000:00:01.0 (0140 -> 0141) <6>ata1: PATA max UDMA/100 cmd 0x1050 ctl 0x1062 bmdma 0x1040 irq 28 <6>scsi0 : pata_artop <6>ata1.00: ATA-5, max UDMA/100, 156301488 sectors: LBA <6>ata1.00: configured for UDMA/100 <5>scsi 0:0:0:0: Direct-Access ATA ST380021A 3.75 PQ: 0 ANSI: 5 <5>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) <5>sda: Write Protect is off <7>sda: Mode Sense: 00 3a 00 00 <5>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA <5>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) <5>sda: Write Protect is off <7>sda: Mode Sense: 00 3a 00 00 <5>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA <6> sda: sda1 sda2 < sda5 sda6 > <5>sd 0:0:0:0: Attached scsi disk sda <3>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen <3>ata1.00: cmd c8/00:08:52:3e:d6/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in <4> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) <6>ata1: soft resetting port <6>ata1.00: configured for UDMA/100 <6>ata1: EH complete <5>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) <5>sda: Write Protect is off <7>sda: Mode Sense: 00 3a 00 00 <5>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA <4>ATA: abnormal status 0x80 on port 0x1057 <4>ATA: abnormal status 0x80 on port 0x1057 <4>ATA: abnormal status 0x80 on port 0x1057 <3>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen <3>ata1.00: cmd c8/00:08:41:6f:d6/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in <4> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) <6>ata1: soft resetting port <6>ata1.00: configured for UDMA/100 <6>ata1: EH complete <5>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) <5>sda: Write Protect is off <7>sda: Mode Sense: 00 3a 00 00 <5>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA <3>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen <3>ata1.00: cmd ca/00:08:47:10:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out <4> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) <6>ata1: soft resetting port <6>ata1.00: configured for UDMA/100 <6>ata1: EH complete <5>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) <5>sda: Write Protect is off <7>sda: Mode Sense: 00 3a 00 00 <5>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA <4>ATA: abnormal status 0x80 on port 0x1057 <4>ATA: abnormal status 0x80 on port 0x1057 <4>ATA: abnormal status 0x80 on port 0x1057 <4>ata1.00: limiting speed to UDMA/66 <3>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen <3>ata1.00: cmd ca/00:08:71:6f:d6/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out <4> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) <6>ata1: soft resetting port <6>ata1.00: configured for UDMA/66 <6>ata1: EH complete <5>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) <5>sda: Write Protect is off <7>sda: Mode Sense: 00 3a 00 00 <5>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA <3>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen <3>ata1.00: cmd c8/00:04:3f:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 2048 in <4> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) <6>ata1: soft resetting port <6>ata1.00: configured for UDMA/66 <6>ata1: EH complete <5>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) <5>sda: Write Protect is off <7>sda: Mode Sense: 00 3a 00 00 <5>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA