[root@sip /]# cat pri.debug5.st
T203 counter expired, sending RR and scheduling T203 again
Sending Receiver Ready (51)

> [ 00 01 01 67 ]

> Supervisory frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
> Zero: 0     S: 0 01: 1  [ RR (receive ready) ]
> N(R): 051 P/F: 1
> 0 bytes of data
-- Restarting T203 counter

< [ 00 01 01 61 ]

< Supervisory frame:
< SAPI: 00  C/R: 0 EA: 0
<  TEI: 000        EA: 1
< Zero: 0     S: 0 01: 1  [ RR (receive ready) ]
< N(R): 048 P/F: 1
< 0 bytes of data
-- ACKing all packets from 47 to (but not including) 48
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
-- Got RR response to our frame
-- Restarting T203 counter
-- Making new call for cr 32786

> [ 00 01 60 66 08 02 00 12 05 04 03 80 90 a3 18 03 a9 83 81 6c 0c 21 81 30 31 3                                              1 35 36 36 32 30 30 30 70 0b a1 30 31 31 38 38 34 39 37 35 31 a1 ]

> Informational frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
> N(S): 048   0: 0
> N(R): 051   P: 0
> 43 bytes of data
-- Restarting T203 counter
Stopping T_203 timer
Starting T_200 timer
> Protocol Discriminator: Q.931 (8)  len=43
> Call Ref: len= 2 (reference 18/0x12) (Originator)
> Message type: SETUP (5)
> [04 03 80 90 a3]
> Bearer Capability (len= 5) [ Ext: 1  Q.931 Std: 0  Info transfer capability: S                                              peech (0)
>                              Ext: 1  Trans mode/rate: 64kbps, circuit-mode (16                                              )
>                              Ext: 1  User information layer 1: A-Law (35)
> [18 03 a9 83 81]
> Channel ID (len= 5) [ Ext: 1  IntID: Implicit  PRI  Spare: 0  Exclusive  Dchan                                              : 0
>                        ChanSel: Reserved
>                       Ext: 1  Coding: 0  Number Specified  Channel Type: 3
>                       Ext: 1  Channel: 1 ]
> [6c 0c 21 81 30 31 31 35 36 36 32 30 30 30]
> Calling Number (len=14) [ Ext: 0  TON: National Number (2)  NPI: ISDN/Telephon                                              y Numbering Plan (E.164/E.163) (1)
>                           Presentation: Presentation permitted, user number pa                                              ssed network screening (1)  '0115662000' ]
> [70 0b a1 30 31 31 38 38 34 39 37 35 31]
> Called Number (len=13) [ Ext: 1  TON: National Number (2)  NPI: ISDN/Telephony                                               Numbering Plan (E.164/E.163) (1)  '0118849751' ]
> [a1]
> Sending Complete (len= 1)
q931.c:2879 q931_setup: call 32786 on channel 1 enters state 1 (Call Initiated)

< [ 00 01 01 62 ]

< Supervisory frame:
< SAPI: 00  C/R: 0 EA: 0
<  TEI: 000        EA: 1
< Zero: 0     S: 0 01: 1  [ RR (receive ready) ]
< N(R): 049 P/F: 0
< 0 bytes of data
-- ACKing all packets from 47 to (but not including) 49
-- ACKing packet 48, new txqueue is -1 (-1 means empty)
-- Since there was nothing left, stopping T200 counter
-- Nothing left, starting T203 counter
-- Restarting T203 counter

< [ 02 01 66 62 08 02 80 12 02 18 03 a9 83 81 ]

< Informational frame:
< SAPI: 00  C/R: 1 EA: 0
<  TEI: 000        EA: 1
< N(S): 051   0: 0
< N(R): 049   P: 0
< 10 bytes of data
-- ACKing all packets from 48 to (but not including) 49
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
< Protocol Discriminator: Q.931 (8)  len=10
< Call Ref: len= 2 (reference 18/0x12) (Terminator)
< Message type: CALL PROCEEDING (2)
< [18 03 a9 83 81]
< Channel ID (len= 5) [ Ext: 1  IntID: Implicit  PRI  Spare: 0  Exclusive  Dchan                                              : 0
<                        ChanSel: Reserved
<                       Ext: 1  Coding: 0  Number Specified  Channel Type: 3
<                       Ext: 1  Channel: 1 ]
-- Processing IE 24 (cs0, Channel Identification)
q931.c:3414 q931_receive: call 32786 on channel 1 enters state 3 (Outgoing call                                                Proceeding)
Sending Receiver Ready (52)

> [ 02 01 01 68 ]

> Supervisory frame:
> SAPI: 00  C/R: 1 EA: 0
>  TEI: 000        EA: 1
> Zero: 0     S: 0 01: 1  [ RR (receive ready) ]
> N(R): 052 P/F: 0
> 0 bytes of data
-- Restarting T203 counter
-- Restarting T203 counter

< [ 02 01 68 62 08 02 80 12 03 1e 02 82 88 1e 02 82 82 ]

< Informational frame:
< SAPI: 00  C/R: 1 EA: 0
<  TEI: 000        EA: 1
< N(S): 052   0: 0
< N(R): 049   P: 0
< 13 bytes of data
-- ACKing all packets from 48 to (but not including) 49
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
< Protocol Discriminator: Q.931 (8)  len=13
< Call Ref: len= 2 (reference 18/0x12) (Terminator)
< Message type: PROGRESS (3)
< [1e 02 82 88]
< Progress Indicator (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0)  0: 0                                                Location: Public network serving the local user (2)
<                               Ext: 1  Progress Description: Inband information                                               or appropriate pattern now available. (8) ]
< [1e 02 82 82]
< Progress Indicator (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0)  0: 0                                                Location: Public network serving the local user (2)
<                               Ext: 1  Progress Description: Called equipment i                                              s non-ISDN. (2) ]
-- Processing IE 30 (cs0, Progress Indicator)
-- Processing IE 30 (cs0, Progress Indicator)
Sending Receiver Ready (53)

> [ 02 01 01 6a ]

> Supervisory frame:
> SAPI: 00  C/R: 1 EA: 0
>  TEI: 000        EA: 1
> Zero: 0     S: 0 01: 1  [ RR (receive ready) ]
> N(R): 053 P/F: 0
> 0 bytes of data
-- Restarting T203 counter
-- Restarting T203 counter
T203 counter expired, sending RR and scheduling T203 again
Sending Receiver Ready (53)

> [ 00 01 01 6b ]

> Supervisory frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
> Zero: 0     S: 0 01: 1  [ RR (receive ready) ]
> N(R): 053 P/F: 1
> 0 bytes of data
-- Restarting T203 counter

< [ 00 01 01 63 ]

< Supervisory frame:
< SAPI: 00  C/R: 0 EA: 0
<  TEI: 000        EA: 1
< Zero: 0     S: 0 01: 1  [ RR (receive ready) ]
< N(R): 049 P/F: 1
< 0 bytes of data
-- ACKing all packets from 48 to (but not including) 49
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
-- Got RR response to our frame
-- Restarting T203 counter
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Outgoing call  Proceeding, peers                                              tate Incoming Call Proceeding
q931.c:2763 q931_disconnect: call 32786 on channel 1 enters state 11 (Disconnect                                               Request)

> [ 00 01 62 6a 08 02 00 12 45 08 02 81 90 ]

> Informational frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
> N(S): 049   0: 0
> N(R): 053   P: 0
> 9 bytes of data
-- Restarting T203 counter
Stopping T_203 timer
Starting T_200 timer
> Protocol Discriminator: Q.931 (8)  len=9
> Call Ref: len= 2 (reference 18/0x12) (Originator)
> Message type: DISCONNECT (69)
> [08 02 81 90]
> Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0)  Spare: 0  Location:                                               Private network serving the local user (1)
>                  Ext: 1  Cause: Normal Clearing (16), class = Normal Event (1)                                               ]

< [ 00 01 01 64 ]

< Supervisory frame:
< SAPI: 00  C/R: 0 EA: 0
<  TEI: 000        EA: 1
< Zero: 0     S: 0 01: 1  [ RR (receive ready) ]
< N(R): 050 P/F: 0
< 0 bytes of data
-- ACKing all packets from 48 to (but not including) 50
-- ACKing packet 49, new txqueue is -1 (-1 means empty)
-- Since there was nothing left, stopping T200 counter
-- Nothing left, starting T203 counter
-- Restarting T203 counter

< [ 02 01 6a 64 08 02 80 12 4d ]

< Informational frame:
< SAPI: 00  C/R: 1 EA: 0
<  TEI: 000        EA: 1
< N(S): 053   0: 0
< N(R): 050   P: 0
< 5 bytes of data
-- ACKing all packets from 49 to (but not including) 50
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
< Protocol Discriminator: Q.931 (8)  len=5
< Call Ref: len= 2 (reference 18/0x12) (Terminator)
< Message type: RELEASE (77)
q931.c:3524 q931_receive: call 32786 on channel 1 enters state 0 (Null)
Sending Receiver Ready (54)

> [ 02 01 01 6c ]

> Supervisory frame:
> SAPI: 00  C/R: 1 EA: 0
>  TEI: 000        EA: 1
> Zero: 0     S: 0 01: 1  [ RR (receive ready) ]
> N(R): 054 P/F: 0
> 0 bytes of data
-- Restarting T203 counter
-- Restarting T203 counter
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Release Request

> [ 00 01 64 6c 08 02 00 12 5a 08 02 81 90 ]

> Informational frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
> N(S): 050   0: 0
> N(R): 054   P: 0
> 9 bytes of data
-- Restarting T203 counter
Stopping T_203 timer
Starting T_200 timer
> Protocol Discriminator: Q.931 (8)  len=9
> Call Ref: len= 2 (reference 18/0x12) (Originator)
> Message type: RELEASE COMPLETE (90)
> [08 02 81 90]
> Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0)  Spare: 0  Location:                                               Private network serving the local user (1)
>                  Ext: 1  Cause: Normal Clearing (16), class = Normal Event (1)                                               ]
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null

< [ 00 01 01 66 ]

< Supervisory frame:
< SAPI: 00  C/R: 0 EA: 0
<  TEI: 000        EA: 1
< Zero: 0     S: 0 01: 1  [ RR (receive ready) ]
< N(R): 051 P/F: 0
< 0 bytes of data
-- ACKing all packets from 49 to (but not including) 51
-- ACKing packet 50, new txqueue is -1 (-1 means empty)
-- Since there was nothing left, stopping T200 counter
-- Nothing left, starting T203 counter
-- Restarting T203 counter
T203 counter expired, sending RR and scheduling T203 again
Sending Receiver Ready (54)

> [ 00 01 01 6d ]

> Supervisory frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
> Zero: 0     S: 0 01: 1  [ RR (receive ready) ]
> N(R): 054 P/F: 1
> 0 bytes of data
-- Restarting T203 counter

< [ 00 01 01 67 ]

< Supervisory frame:
< SAPI: 00  C/R: 0 EA: 0
<  TEI: 000        EA: 1
< Zero: 0     S: 0 01: 1  [ RR (receive ready) ]
< N(R): 051 P/F: 1
< 0 bytes of data
-- ACKing all packets from 50 to (but not including) 51
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
-- Got RR response to our frame
-- Restarting T203 counter
[root@sip /]#