fireboot@localhost ~ $ dmesg Linux version 2.6.19-gentoo-r5 (root@livecd) (gcc version 4.1.1 (Gentoo 4.1.1)) #1 SMP Fri Mar 9 17:02:43 CET 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f5390 Entering add_active_range(0, 0, 262128) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 262128 early_node_map[1] active PFN ranges 0: 0 -> 262128 On node 0 totalpages: 262128 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 255 pages used for memmap HighMem zone: 32497 pages, LIFO batch:7 DMI 2.3 present. Using APIC driver default ACPI: RSDP (v000 Nvidia ) @ 0x000f9270 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff30c0 ACPI: SRAT (v001 AMD HAMMER 0x00000001 AMD 0x00000001) @ 0x3fff9680 ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff9780 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff95c0 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:11 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:11 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) Detected 2010.316 MHz processor. Built 1 zonelists. Total pages: 260081 Kernel command line: root=/dev/sda2 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1033588k/1048512k available (2654k kernel code, 14332k reserved, 1222k data, 252k init, 131008k highmem) virtual kernel memory layout: fixmap : 0xffe16000 - 0xfffff000 (1956 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0532000 - 0xc0571000 ( 252 kB) .data : 0xc0397b2d - 0xc04c9694 (1222 kB) .text : 0xc0100000 - 0xc0397b2d (2654 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4023.08 BogoMIPS (lpj=8046162) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0(2) -> Core 0 CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. Freeing SMP alternatives: 16k freed ACPI: Core revision 20060707 tbxface-0107 [01] load_tables : ACPI Tables successfully acquired Parsing all Control Methods: Table [DSDT](id 0005) - 1014 Objects with 90 Devices 279 Methods 40 Regions ACPI Namespace successfully loaded at root c05d2b10 evxfevnt-0089 [02] enable : Transition to ACPI mode successful CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01 Booting processor 1/1 eip 2000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4020.88 BogoMIPS (lpj=8041766) CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1(2) -> Core 1 CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01 Total of 2 processors activated (8043.96 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 checking TSC synchronization across 2 CPUs: CPU#0 had 69 usecs TSC skew, fixed it up. CPU#1 had -69 usecs TSC skew, fixed it up. Brought up 2 CPUs migration_cost=174 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG PCI: No mmconfig possible on 0:18 Setting up standard PCI resources pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty evgpeblk-0951 [04] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 evgpeblk-0951 [04] ev_create_gpe_block : GPE 20 to 5F [_GPE] 8 regs on int 0x9 evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 0 Runtime GPEs in this block evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 0 Runtime GPEs in this block Completing Region/Field/Buffer/Package initialization:............................................................................................... Initialized 40/40 Regions 9/9 Fields 34/34 Buffers 12/21 Packages (1023 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:.. Executed 2 _INI methods requiring 1 _STA executions (examined 95 objects) ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:09.0 Boot video device is 0000:05:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 13 devices SCSI subsystem initialized libata version 2.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:01: ioport range 0x4000-0x407f could not be reserved pnp: 00:01: ioport range 0x4080-0x40ff has been reserved pnp: 00:01: ioport range 0x4400-0x447f has been reserved pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved pnp: 00:01: ioport range 0x4800-0x487f has been reserved pnp: 00:01: ioport range 0x4880-0x48ff has been reserved ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 ACPI: PCI Interrupt 0000:01:0c.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 16 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[fdeff000-fdeff7ff] Max Packet=[2048] IR/IT contexts=[4/8] PCI: Bridge: 0000:00:09.0 IO window: a000-afff MEM window: fde00000-fdefffff PREFETCH window: fdf00000-fdffffff PCI: Bridge: 0000:00:0b.0 IO window: 9000-9fff MEM window: fdd00000-fddfffff PREFETCH window: fdc00000-fdcfffff PCI: Bridge: 0000:00:0c.0 IO window: 8000-8fff MEM window: fdb00000-fdbfffff PREFETCH window: fda00000-fdafffff PCI: Bridge: 0000:00:0d.0 IO window: 7000-7fff MEM window: fd900000-fd9fffff PREFETCH window: fd800000-fd8fffff PCI: Bridge: 0000:00:0e.0 IO window: 6000-6fff MEM window: fd700000-fd7fffff PREFETCH window: d0000000-dfffffff PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Machine check exception polling timer started. microcode: CPU0 not a capable Intel processor microcode: CPU1 not a capable Intel processor IA-32 Microcode Update Driver: v1.14a highmem bounce pool size: 64 pages io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered PCI: Linking AER extended capability on 0000:00:0b.0 PCI: Found HT MSI mapping on 0000:00:0b.0 with capability disabled PCI: Found HT MSI mapping on 0000:00:00.0 with capability enabled PCI: Linking AER extended capability on 0000:00:0c.0 PCI: Found HT MSI mapping on 0000:00:0c.0 with capability disabled PCI: Found HT MSI mapping on 0000:00:00.0 with capability enabled PCI: Linking AER extended capability on 0000:00:0d.0 PCI: Found HT MSI mapping on 0000:00:0d.0 with capability disabled PCI: Found HT MSI mapping on 0000:00:00.0 with capability enabled PCI: Linking AER extended capability on 0000:00:0e.0 PCI: Found HT MSI mapping on 0000:00:0e.0 with capability disabled PCI: Found HT MSI mapping on 0000:00:00.0 with capability enabled PCI: Setting latency timer of device 0000:00:0b.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] Allocate Port Service[0000:00:0b.0:pcie03] PCI: Setting latency timer of device 0000:00:0c.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] Allocate Port Service[0000:00:0c.0:pcie03] PCI: Setting latency timer of device 0000:00:0d.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] Allocate Port Service[0000:00:0d.0:pcie03] PCI: Setting latency timer of device 0000:00:0e.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] Allocate Port Service[0000:00:0e.0:pcie03] Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Fan [FAN] (on) ACPI: Thermal Zone [THRM] (22 C) Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:03:00.0 to 64 sky2 v1.10 addr 0xfdbfc000 irq 17 Yukon-EC (0xb6) rev 1 sky2 eth0: addr 00:13:d3:c8:dc:6a forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:0a.0 to 64 forcedeth: using HIGHDMA eth1: forcedeth.c: subsystem: 01462:7125 bound to 0000:00:0a.0 netconsole: not configured, aborting Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 NFORCE-CK804: chipset revision 242 NFORCE-CK804: not 100% native mode: will probe irqs later NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0000c97068] hda: HL-DT-STDVD-ROM GDR8164B, ATAPI CD/DVD-ROM drive hdb: _NEC DVD_RW ND-4550A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... hda: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdb: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) 3ware Storage Controller device driver for Linux v1.26.02.001. sata_nv 0000:00:07.0: version 2.0 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 22 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:07.0 to 64 ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xCC00 irq 19 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xCC08 irq 19 scsi0 : sata_nv ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/133 scsi1 : sata_nv ata2: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA WDC WD2500KS-00M 02.0 PQ: 0 ANSI: 5 SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 21 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:08.0 to 64 ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xB800 irq 20 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xB808 irq 20 scsi2 : sata_nv ata3: SATA link down (SStatus 0 SControl 300) scsi3 : sata_nv ata4: SATA link down (SStatus 0 SControl 300) Fusion MPT base driver 3.04.02 Copyright (c) 1999-2005 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.02 ieee1394: raw1394: /dev/raw1394 device initialized usbmon: debugfs is not available ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 21, io mem 0xfeb00000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 18, io mem 0xfe02f000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected USB Universal Host Controller Interface driver v3.0 usb 2-7: new low speed USB device using ohci_hcd and address 2 usb 2-7: configuration #1 chosen from 1 choice usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. input: Razer Razer 1600dpi Mouse as /class/input/input0 input: USB HID v1.10 Mouse [Razer Razer 1600dpi Mouse] on usb-0000:00:02.0-7 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com oprofile: using NMI interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (version 2.00.00) powernow-k8: MP systems not supported by PSB BIOS structure powernow-k8: MP systems not supported by PSB BIOS structure acpi_processor-0740 [00] processor_preregister_: Error while parsing _PSD domain information. Assuming no coordination Using IPI Shortcut mode Time: acpi_pm clocksource has been installed. input: AT Translated Set 2 keyboard as /class/input/input1 ReiserFS: sda2: found reiserfs format "3.6" with standard journal ReiserFS: sda2: using ordered data mode ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda2: checking transaction log (sda2) ReiserFS: sda2: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 252k freed Intel 810 + AC97 Audio, version 1.01, 17:01:47 Mar 9 2007 ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:04.0 to 64 i810: NVIDIA nForce Audio found at IO 0xec00 and 0xf000, MEM 0x0000 and 0x0000, IRQ 19 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 ac97_codec: AC97 codec, id: ALG144 (Unknown) i810_audio: only 48Khz playback available. i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not present), total channels = 2 kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. ReiserFS: sda3: found reiserfs format "3.6" with standard journal ReiserFS: sda3: using ordered data mode ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda3: checking transaction log (sda3) ReiserFS: sda3: Using r5 hash to sort names fuse init (API version 7.8) fuse distribution version: 2.6.3 Adding 32088k swap on /dev/sda5. Priority:-1 extents:1 across:32088k sky2 eth0: enabling interface sky2 eth0: disabling interface fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [fglrx] Maximum main memory to use for locked dma buffers: 927 MBytes. [fglrx] module loaded - fglrx 8.32.5 [Dec 12 2006] on minor 0 ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 22 [fglrx] total GART = 130023424 [fglrx] free GART = 114032640 [fglrx] max single GART = 114032640 [fglrx] total LFB = 134086656 [fglrx] free LFB = 116256768 [fglrx] max single LFB = 116256768 [fglrx] total Inv = 134217728 [fglrx] free Inv = 134217728 [fglrx] max single Inv = 134217728 [fglrx] total TIM = 0 fireboot@localhost ~ $