;zapata.conf
[channels]
language=en
context=public
signalling=fxs_ks
callerid=yes
usecallerid=yes
echocancel=yes
echocancelwhenbridged=yes
channel => 1


[general]
static=yes
writeprotect=no
[globals]
DIALOUTANALOG=Zap/1
CALLFILENAME=foo
FOO=foo

[public]
; Incoming calls with no destination land here (usually from the PSTN)
; make incoming calls ring on certain phones
; Give access to outgoing lines or internal extensions if authenticated via
; voicemail since authentication is required by that system
; Ring SIP phones that are "general" lines.
; If the lines ring for >20 seconds, play an amusing message and
; then dial the "u"navailable voicemail box.
; If the lines are busy, dial the "b"usy voicemail box.
;
exten => s,1,noop(${CALLERIDNUM})
exten => s,2,wait(10)
exten => s,3,VoiceMail(u100)
exten => s,4,Hangup
;
;
; Dial 2500 from any phone to go to voicemail system
;
exten => 2500,1,Wait,2
exten => 2500,2,VoicemailMain
exten => 2500,3,Hangup
;
;
; Not all fax machines/fax modems send a fax tone when calling.
; If we get a call from one of those then we can't detect that it's a fax call.
; This only works for devices on Zap channels (Digium cards).
; exten => fax,1,Goto(22,1)
; Hang up the line if the caller doesn't do anything
; exten => t,1,Hangup
; Provide a voicemail * button extension
; exten => a,1,VoicemailMain
;
; NANPA;North American Numbers dialed as 1 + area code
; For example, the New York Public Library dialed as 12123400849
; 1 (North American call) 212 (New york area code) 3400849 (library's phone  
; number)
; WORLD: International Numbers dialed as 011+country code + number
; For example , the Tate Modern Museum in London, U.K. is dialed as 
; 011442078878000
; 011 (International call) 44 (U.K. country code) 2078878000 (museum's number)
; finally, the number just before @voipjet in the Dial string is your VoipJet 
; userid#
;
[forced-analog]
; This is for failure-case outbound dialing.  If for some reason
;  the outbound SIP connections aren't working, but aren't giving errors
;  (i.e.: my path to larger Internet is dead) then I can short-circuit
;  my way to the local analog dial port by dialing "91npaxxxyyyy" and
;  the call will be shunted out the analog port.  This is for when
;  the inevitable cry of "IT DOESN'T WORK!!" is screamed from the
;  living room by She Who Makes Calls.
;
exten => _9.,1,Dial(${DIALOUTANALOG}/${EXTEN:1},70,Tt)
exten => _9.,2,Macro(fastbusy)
exten => _9.,102,Macro(fastbusy)
;
[information]
; If the user is dialing information (411) then send call
;  directly out to the analog line, unless busy, then
;  dump at an unavailable recording
;
; If analog line errors out and goes to step 2, play
;  fastbusy macro.
;
exten => 411,1,Dial(${DIALOUTANALOG}/${EXTEN}
exten => 411,2,Macro(fastbusy)
exten => 411,102,Playback(ss-noservice)
exten => 411,103,Macro(fastbusy)
;

[pstn-local]
; Next, check for numbers that are available "locally" out of
;  my analog line connected to the house.  In area code 503,
;  you must dial an area code in front of all numbers, and
;  a "1" is not possible in front of local numbers.  Annoying.
;
; Thus, this rule matches "15035551212" but will dial "5035551212"
;
; If the first line (DIALOUTANALOG) is busy, then fail over
;  and dial out the iconnecthere SIP peer.  This ensures harmony
;  in the household when She is one one line and I require the phone. :)
;
; Note that the iconnect Dial doesn't strip the first digit, since
;  we need the single "1" prefix in those outbound calls.
;
; The list is duplicated for area code "604".
;
exten => _1604.,1,Dial(${DIALOUTANALOG}/${EXTEN:1})
exten => _1604.,2,Macro(fastbusy)
exten => _1604.,102,Macro(dialiconnect,${EXTEN},70)
;
disallow=all ; Prevent all codecs...
allow = ulaw ; ...except G.711 ulaw
jitterbuffer=yes ; Jitter buffer enabled...
dropcount=1 ; ..to drop at most .5% of the Voip Packets