[root@asterisk1 network-scripts]# /usr/sbin/wpa_supplicant -dd -Dhostap -ieth0 -c /etc/wpa_supplicant/wpa_supplicant.conf Initializing interface 'eth0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'hostap' ctrl_interface 'N/A' Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf' Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' Line: 7 - start of a new network block ssid - hexdump_ascii(len=12): 49 50 47 65 6e 65 72 61 74 69 6f 6e IPGeneration PSK (ASCII passphrase) - hexdump_ascii(len=19): [REMOVED] key_mgmt: 0x2 scan_ssid=1 (0x1) proto: 0x1 PSK (from passphrase) - hexdump(len=32): [REMOVED] Priority group 0 id=0 ssid='IPGeneration' Initializing interface (2) 'eth0' EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 SIOCGIWRANGE: too old (short) data - assuming WPA is not supported Own MAC address: 00:e0:00:d1:bb:59 wpa_driver_hostap_set_wpa: enabled=1 wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0 ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported Failed to set encryption. wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 key_len=0 ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported Failed to set encryption. wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 key_len=0 ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported Failed to set encryption. wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 key_len=0 ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported Failed to set encryption. wpa_driver_hostap_set_countermeasures: enabled=0 wpa_driver_hostap_set_drop_unencrypted: enabled=1 Setting scan request: 0 sec 100000 usec Added interface eth0 RTM_NEWLINK, IFLA_IFNAME: Interface 'eth0' added RTM_NEWLINK, IFLA_IFNAME: Interface 'eth0' added State: DISCONNECTED -> SCANNING Starting AP scan (specific SSID) Scan SSID - hexdump_ascii(len=12): 49 50 47 65 6e 65 72 61 74 69 6f 6e IPGeneration ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported Failed to initiate AP scan. Setting scan request: 10 sec 0 usec CTRL-EVENT-TERMINATING - signal 2 received Removing interface eth0 State: SCANNING -> DISCONNECTED No keys have been configured - skip key clearing EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 wpa_driver_hostap_set_wpa: enabled=0 ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported wpa_driver_hostap_set_drop_unencrypted: enabled=0 wpa_driver_hostap_set_countermeasures: enabled=0 No keys have been configured - skip key clearing ioctl[SIOCSIWAP]: Operation not supported Cancelling scan request [root@asterisk1 network-scripts]#