root@nslu2:~$ dmesg <5>Linux version 2.6.20 (rwhitby@etch) (gcc version 4.1.1) #1 PREEMPT Wed Mar 14 07:03:37 CST 2007 <4>CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE), cr=0000397f <4>Machine: Linksys NSLU2 <4>Memory policy: ECC disabled, Data cache writeback <7>On node 0 totalpages: 8192 <7> DMA zone: 64 pages used for memmap <7> DMA zone: 0 pages reserved <7> DMA zone: 8128 pages, LIFO batch:0 <7> Normal zone: 0 pages used for memmap <4>CPU0: D VIVT undefined 5 cache <4>CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets <4>CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets <4>Built 1 zonelists. Total pages: 8128 <5>Kernel command line: rtc-x1205.probe=0,0x6f init=/linuxrc root=/dev/mtdblock4 rootfstype=jffs2 rw noirqdebug console=ttyS0,115200n8 <6>IRQ lockup detection disabled <4>PID hash table entries: 128 (order: 7, 512 bytes) <4>Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) <4>Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) <6>Memory: 32MB = 32MB total <5>Memory: 30244KB available (1948K code, 163K data, 92K init) <7>Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200) <4>Mount-cache hash table entries: 512 <6>CPU: Testing write buffer coherency: ok <6>NET: Registered protocol family 16 <4>IXP4xx: Using 16MiB expansion bus window size <4>PCI: IXP4xx is host <4>PCI: IXP4xx Using direct access for memory space <6>PCI: bus0: Fast back to back transfers disabled <6>dmabounce: registered device 0000:00:01.0 on pci bus <6>dmabounce: registered device 0000:00:01.1 on pci bus <6>dmabounce: registered device 0000:00:01.2 on pci bus <5>SCSI subsystem initialized <6>usbcore: registered new interface driver usbfs <6>usbcore: registered new interface driver hub <6>usbcore: registered new device driver usb <6>NET: Registered protocol family 2 <4>IP route cache hash table entries: 1024 (order: 0, 4096 bytes) <4>TCP established hash table entries: 1024 (order: 0, 4096 bytes) <4>TCP bind hash table entries: 512 (order: -1, 2048 bytes) <6>TCP: Hash tables configured (established 1024 bind 512) <6>TCP reno registered <4>NetWinder Floating Point Emulator V0.97 (double precision) <6>JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc. <6>io scheduler noop registered <6>io scheduler deadline registered (default) <6>Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled <6>serial8250.0: ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale <6>serial8250.0: ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale <4>RAMDISK driver initialized: 4 RAM disks of 10240K size 1024 blocksize <6>IXP4XX Q Manager 0.2.1 initialized. <6>IXP4XX NPE driver Version 0.3.0 initialized <6>ixp4xx_mac driver 0.3.1: eth0 on NPE-B with PHY[1] initialized <6>NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $ <6>IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank <7>IXP4XX-Flash.0: Found an alias at 0x800000 for the chip at 0x0 <4> Intel/Sharp Extended Query Table at 0x0031 <6>Using buffer write method <5>cfi_cmdset_0001: Erase suspend on write enabled <7>erase region 0: offset=0x0,size=0x20000,blocks=64 <5>Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0x7e0000 <5>6 RedBoot partitions found on MTD device IXP4XX-Flash.0 <5>Creating 6 MTD partitions on "IXP4XX-Flash.0": <5>0x00000000-0x00040000 : "RedBoot" <6>nslu2 mac: 00:04:5a:0f:b2:c6 <5>0x00040000-0x00060000 : "SysConf" <5>0x00060000-0x00160000 : "Kernel" <5>0x00160000-0x00180000 : "Ramdisk" <5>0x00180000-0x007e0000 : "Flashdisk" <5>0x007e0000-0x00800000 : "FIS directory" <4>npe: searching for firmware... <6>npe: found at 0x1c010, IXP425/NPE-B func: 00, rev: 2.1, size: 11964, id: 01000201 <6>Image loaded to NPE-B Func:0, Rel: 2:1, Status: 82c00000 <4>PCI: enabling device 0000:00:01.2 (0140 -> 0142) <6>ehci_hcd 0000:00:01.2: EHCI Host Controller <6>ehci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 <6>ehci_hcd 0000:00:01.2: irq 26, io mem 0x48002000 <6>ehci_hcd 0000:00:01.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 <6>usb usb1: configuration #1 chosen from 1 choice <6>hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 5 ports detected <6>Initializing USB Mass Storage driver... <6>usb 1-1: new high speed USB device using ehci_hcd and address 2 <6>usb 1-1: configuration #1 chosen from 1 choice <6>usb 1-2: new high speed USB device using ehci_hcd and address 3 <6>usb 1-2: configuration #1 chosen from 1 choice <6>scsi0 : SCSI emulation for USB Mass Storage devices <6>usbcore: registered new interface driver usb-storage <6>USB Mass Storage support registered. <7>usb-storage: device found at 3 <7>usb-storage: waiting for device to settle before scanning <6>input: ixp4xx beeper as /class/input/input0 <6>i2c /dev entries driver <6>x1205 0-006f: chip found, driver version 1.0.7 <6>x1205 0-006f: rtc core: registered x1205 as rtc0 <6>Registered led device: ready <6>Registered led device: status <6>Registered led device: disk-1 <6>Registered led device: disk-2 <6>TCP cubic registered <6>NET: Registered protocol family 1 <6>NET: Registered protocol family 17 <6>XScale DSP coprocessor detected. <6>Time: OSTS clocksource has been installed. <6>x1205 0-006f: setting the system clock to 2007-03-16 04:57:40 (1174021060) <4>VFS: Mounted root (jffs2 filesystem). <6>Freeing init memory: 92K <5>scsi 0:0:0:0: Direct-Access Imation Flash Drive 1.00 PQ: 0 ANSI: 2 <5>SCSI device sda: 1003520 512-byte hdwr sectors (514 MB) <5>sda: Write Protect is off <7>sda: Mode Sense: 0b 00 00 08 <3>sda: assuming drive cache: write through <5>SCSI device sda: 1003520 512-byte hdwr sectors (514 MB) <5>sda: Write Protect is off <7>sda: Mode Sense: 0b 00 00 08 <3>sda: assuming drive cache: write through <6> sda: sda1 sda2 <5>sd 0:0:0:0: Attached scsi removable disk sda <7>usb-storage: device scan complete <7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) <4>PCI: enabling device 0000:00:01.0 (0140 -> 0142) <6>ohci_hcd 0000:00:01.0: OHCI Host Controller <6>ohci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 2 <6>ohci_hcd 0000:00:01.0: irq 28, io mem 0x48000000 <6>usb usb2: configuration #1 chosen from 1 choice <6>hub 2-0:1.0: USB hub found <6>hub 2-0:1.0: 3 ports detected <4>PCI: enabling device 0000:00:01.1 (0140 -> 0142) <6>ohci_hcd 0000:00:01.1: OHCI Host Controller <6>ohci_hcd 0000:00:01.1: new USB bus registered, assigned bus number 3 <6>ohci_hcd 0000:00:01.1: irq 27, io mem 0x48001000 <6>usb usb3: configuration #1 chosen from 1 choice <6>hub 3-0:1.0: USB hub found <6>hub 3-0:1.0: 2 ports detected <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on sda1, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <7>ieee80211_crypt: registered algorithm 'NULL' <6>ieee80211: 802.11 data/management/control stack, git-1.1.13 <6>ieee80211: Copyright (C) 2004-2005 Intel Corporation <6>zd1211rw 1-1:1.0: firmware version 4605 <6>zd1211rw 1-1:1.0: zd1211 chip 6891:a727 v4330 high 00-12-a9 RF2959_RF pa0 g--- <6>zd1211rw 1-1:1.0: eth1 <6>usbcore: registered new interface driver zd1211rw <6>Adding 96380k swap on /dev/sda2. Priority:-1 extents:1 across:96380k <6>Bluetooth: Core ver 2.11 <6>NET: Registered protocol family 31 <6>Bluetooth: HCI device and connection manager initialized <6>Bluetooth: HCI socket layer initialized <6>Bluetooth: L2CAP ver 2.8 <6>Bluetooth: L2CAP socket layer initialized <6>Bluetooth: HIDP (Human Interface Emulation) ver 1.1 <6>Bluetooth: RFCOMM socket layer initialized <6>Bluetooth: RFCOMM TTY layer initialized <6>Bluetooth: RFCOMM ver 1.8 <6>eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 <7>Link of eth0 is full-duplex <5>Bridge firewalling registered <6>device eth0 entered promiscuous mode <6>br0: port 1(eth0) entering learning state <6>Bluetooth: BNEP (Ethernet Emulation) ver 1.2 <6>Bluetooth: BNEP filters: protocol multicast <6>br0: topology change detected, propagating <6>br0: port 1(eth0) entering forwarding state <6>usb 1-1: USB disconnect, address 2 root@nslu2:~$