OpenBSD 3.6 (GENERIC) #59: Fri Sep 17 12:32:57 MDT 2004 deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) 4 CPU 2.00GHz ("GenuineIntel" 686-class) 2 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM real mem = 1064869888 (1039912K) avail mem = 965042176 (942424K) using 4278 buffers containing 53346304 bytes (52096K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(de) BIOS, date 11/13/02, BIOS32 rev. 0 @ 0xfb2e0 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf84 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde90/224 (12 entries) pcibios0: PCI Exclusive IRQs: 5 9 10 11 pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371SB ISA" rev 0x00) pcibios0: PCI bus #1 is the last bus bios0: ROM list: 0xc0000/0xae00! 0xcc000/0x1800 0xce000/0x5600 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82845G/GL" rev 0x03 vga1 at pci0 dev 2 function 0 "Intel 82845G/GL Video" rev 0x03: aperture at 0xe0000000, size 0x8000000 wsdisplay0 at vga1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 5 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 10 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 9 ehci0: EHCI version 1.0 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 usb3 at ehci0: USB revision 2.0 uhub3 at usb3 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered ppb0 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x81 pci1 at ppb0 bus 1 em0 at pci1 dev 5 function 0 "Intel PRO/1000MT (82540EM)" rev 0x02: irq 5, address: 00:30:48:41:a9:ee em1 at pci1 dev 6 function 0 "Intel PRO/1000MT (82540EM)" rev 0x02: irq 9em1: The EEPROM Checksum Is Not Valid em1: Unable to initialize the hardware ahc1 at pci1 dev 7 function 0 "Adaptec AIC-7899 U160" rev 0x01: irq 11 scsibus0 at ahc1: 16 targets sd0 at scsibus0 targ 15 lun 0: SCSI3 0/direct fixed sd0: 35046MB, 48122 cyl, 2 head, 745 sec, 512 bytes/sec, 71775284 sec total ahc2 at pci1 dev 7 function 1 "Adaptec AIC-7899 U160" rev 0x01: irq 10 scsibus1 at ahc2: 16 targets ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x01 pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus2 at atapiscsi0: 2 targets cd0 at scsibus2 targ 0 lun 0: SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no drives) "Intel 82801DB SMBus" rev 0x01 at pci0 dev 31 function 3 not configured isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: sysbeep0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 lm0 at isa0 port 0x290/8: W83627HF npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask ef65 netmask ef65 ttymask ffe7 pctr: user-level cycle counter enabled ahc1: target 15 using 16bit transfers ahc1: target 15 synchronous at 80.0MHz DT, offset = 0x7f dkcsum: sd0 matched BIOS disk 80 root on sd0a rootdev=0x400 rrootdev=0xd00 rawdev=0xd02