[darryl@localhost ~]$ cd /sbin/lspcmcia bash: cd: /sbin/lspcmcia: Not a directory [darryl@localhost ~]$ cd /sbin/lspcmcia bash: cd: /sbin/lspcmcia: Not a directory [darryl@localhost ~]$ dmesg Linux version 2.6.20-1.2925.fc6 (brewbuilder@ls20-bc1-13.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Sat Mar 10 18:38:39 EST 2007 Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet noapic iommu=off BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003df00000 (usable) BIOS-e820: 000000003df00000 - 000000003df17000 (ACPI data) BIOS-e820: 000000003df17000 - 000000003df80000 (ACPI NVS) BIOS-e820: 000000003df80000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 157) 0 entries of 3200 used Entering add_active_range(0, 256, 253696) 1 entries of 3200 used end_pfn_map = 1048576 DMI present. ACPI: RSDP (v000 HP ) @ 0x00000000000f8970 ACPI: RSDT (v001 HP RSDT 0x06040000 LTP 0x00000000) @ 0x000000003df0fb99 ACPI: FADT (v001 HP MCP51M 0x06040000 PTL_ 0x000f4240) @ 0x000000003df16d52 ACPI: SSDT (v001 HP POWERNOW 0x06040000 LTP 0x00000001) @ 0x000000003df16dc6 ACPI: MCFG (v001 HP MCFG 0x06040000 LTP 0x00000000) @ 0x000000003df16f48 ACPI: MADT (v001 HP APIC 0x06040000 LTP 0x00000000) @ 0x000000003df16f84 ACPI: BOOT (v001 HP $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x000000003df16fd8 ACPI: DSDT (v001 HP MCP51M 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000 Scanning NUMA topology in Northbridge 24 Number of nodes 1 Node 0 MemBase 0000000000000000 Limit 000000003df00000 Entering add_active_range(0, 0, 157) 0 entries of 3200 used Entering add_active_range(0, 256, 253696) 1 entries of 3200 used NUMA: Using 63 for the hash shift. Using node hash shift of 63 Bootmem setup node 0 0000000000000000-000000003df00000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 157 0: 256 -> 253696 On node 0 totalpages: 253597 DMA zone: 64 pages used for memmap DMA zone: 1321 pages reserved DMA zone: 2612 pages, LIFO batch:0 DMA32 zone: 3900 pages used for memmap DMA32 zone: 245700 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: Skipping IOAPIC probe due to 'noapic' option. Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 MPTABLE: OEM ID: nVIDIA MPTABLE: Product ID: C51-MCP51 MPTABLE: APIC at: 0xFEE00000 I/O APIC #2 at 0xFEC00000. Setting APIC routing to physical flat Processors: 2 Nosave address range: 000000000009d000 - 000000000009e000 Nosave address range: 000000000009e000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000d2000 Nosave address range: 00000000000d2000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 43264 bytes of per cpu data Built 1 zonelists. Total pages: 248312 Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet noapic iommu=off Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Checking aperture... CPU 0: aperture @ 343e000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Memory: 988600k/1014784k available (2448k kernel code, 25788k reserved, 1456k data, 316k init) Calibrating delay using timer specific routine.. 3216.49 BogoMIPS (lpj=1608248) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code ACPI: Core revision 20060707 ACPI: setting ELCR to 0200 (from 0ca0) Using local APIC timer interrupts. result 12557512 Detected 12.557 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 spurious 8259A interrupt: IRQ7. Calibrating delay using timer specific routine.. 3154.52 BogoMIPS (lpj=1577261) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02 CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff 2 cycles, maxerr 448 cycles) Brought up 2 CPUs Disabling vsyscall due to use of PM timer time.c: Using 3.579545 MHz WALL PM GTOD PM timer. time.c: Detected 1607.360 MHz processor. sizeof(vma)=176 bytes sizeof(page)=64 bytes sizeof(inode)=720 bytes sizeof(dentry)=224 bytes sizeof(ext3inode)=968 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=248 bytes sizeof(task_struct)=1920 bytes migration_cost=131 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at e0000000 PCI: No mmconfig possible on device 00:18 PCI: No mmconfig possible on device 07:05 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Boot video device is 0000:00:05.0 PCI: Transparent bridge - 0000:00:10.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LK1E] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LK2E] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LK3E] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LK4E] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LUS0] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LUS2] (IRQs 5 *7 9 10 11 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LPID] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LSI1] (IRQs 5 7 9 *10 11 14 15), disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 11 devices usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:03: ioport range 0x1000-0x107f could not be reserved pnp: 00:03: ioport range 0x1080-0x10ff has been reserved pnp: 00:03: ioport range 0x1400-0x147f has been reserved pnp: 00:03: ioport range 0x1480-0x14ff could not be reserved pnp: 00:03: ioport range 0x1800-0x187f has been reserved pnp: 00:03: ioport range 0x1880-0x18ff has been reserved pnp: 00:03: ioport range 0x2000-0x203f has been reserved PCI: Bridge: 0000:00:02.0 IO window: 4000-4fff MEM window: b3000000-b31fffff PREFETCH window: d0000000-d01fffff PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: b3200000-b33fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:10.0 IO window: disabled. MEM window: b3400000-b34fffff PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:00:10.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 2327k freed Simple Boot Flag at 0x36 set to 0x1 audit: initializing netlink socket (disabled) audit(1174386846.498:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key 7B88EE5B4ADA4319 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie03] PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] Allocate Port Service[0000:00:03.0:pcie03] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Thermal Zone [THRM] (57 C) Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0 NFORCE-MCP51: chipset revision 241 NFORCE-MCP51: not 100% native mode: will probe irqs later NFORCE-MCP51: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE-MCP51: 0000:00:0d.0 (rev f1) UDMA133 controller ide0: BM-DMA at 0x3080-0x3087, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... hda: HL-DT-ST DVDRAM GSA-T10N, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... ide-floppy driver 0.99.newide usbcore: registered new interface driver libusual usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 2 AMD Turion(tm) 64 X2 Mobile Technology TL-50 processors (version 2.00.00) powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x13 powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x1e ACPI: (supports S0 S3 S4 S5) Freeing unused kernel memory: 316k freed Write protecting the kernel read-only data: 1042k USB Universal Host Controller Interface driver v3.0 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUS0] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:0b.0 to 64 ohci_hcd 0000:00:0b.0: OHCI Host Controller ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:0b.0: irq 11, io mem 0xb0004000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 7 PCI: setting IRQ 7 as level-triggered ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUS2] -> GSI 7 (level, low) -> IRQ 7 PCI: Setting latency timer of device 0000:00:0b.1 to 64 ehci_hcd 0000:00:0b.1: EHCI Host Controller ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:0b.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:0b.1 ehci_hcd 0000:00:0b.1: irq 7, io mem 0xb0005000 ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected SCSI subsystem initialized libata version 2.00 loaded. sata_nv 0000:00:0e.0: version 3.2 PCI: Enabling device 0000:00:0e.0 (0005 -> 0007) ACPI: PCI Interrupt Link [LTID] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:0e.0 to 64 ata1: SATA max UDMA/133 cmd 0x30C0 ctl 0x30B6 bmdma 0x3090 irq 5 ata2: SATA max UDMA/133 cmd 0x30B8 ctl 0x30B2 bmdma 0x3098 irq 5 scsi0 : sata_nv Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000 usb 2-4: new high speed USB device using ehci_hcd and address 2 input: SynPS/2 Synaptics TouchPad as /class/input/input2 usb 2-4: configuration #1 chosen from 1 choice ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7, max UDMA/100, 156301488 sectors: LBA48 ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/100 scsi1 : sata_nv ata2: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x30BF scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8034GS AH30 PQ: 0 ANSI: 5 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: Attached scsi disk sda device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. audit(1174386850.209:2): enforcing=1 old_enforcing=0 auid=4294967295 security: 3 users, 6 roles, 1604 types, 175 bools, 1 sens, 1024 cats security: 59 classes, 50467 rules security: class dccp_socket not defined in policy security: permission dccp_recv in class node not defined in policy security: permission dccp_send in class node not defined in policy security: permission dccp_recv in class netif not defined in policy security: permission dccp_send in class netif not defined in policy SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), not configured for labeling SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1174386850.625:3): policy loaded auid=4294967295 ieee1394: Initialized config rom entry `ip1394' ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:07:05.0[A] -> Link [LNK1] -> GSI 10 (level, low) -> IRQ 10 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[b3400000-b34007ff] Max Packet=[2048] IR/IT contexts=[4/4] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59. ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:14.0 to 64 forcedeth: using HIGHDMA input: PC Speaker as /class/input/input3 EDAC MC: Ver: 2.0.1 Mar 10 2007 eth0: forcedeth.c: subsystem: 0103c:30b7 bound to 0000:00:14.0 i2c_adapter i2c-0: nForce2 SMBus adapter at 0x3040 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x3000 bcm43xx driver ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 11 ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK1E] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:03:00.0 to 64 bcm43xx: Chip ID 0x4311, rev 0x1 bcm43xx: Number of cores: 4 bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243 bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243 bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243 bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243 bcm43xx: PHY connected bcm43xx: Detected PHY: Version: 4, Type 2, Revision 8 bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2) bcm43xx: Radio turned off bcm43xx: Radio turned off sd 0:0:0:0: Attached scsi generic sg0 type 0 EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2 nvidia: module license 'NVIDIA' taints kernel. ieee1394: Host added: ID:BUS[0-00:1023] GUID[009fc0001913d100] ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LK3E] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:05.0 to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 1.0-9755 Mon Feb 26 23:16:31 PST 2007 sdhci: Secure Digital Host Controller Interface driver, 0.12 sdhci: Copyright(c) Pierre Ossman sdhci: SDHCI controller found at 0000:07:05.1 [1180:0822] (rev 19) ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11 ACPI: PCI Interrupt 0000:07:05.1[B] -> Link [LNK2] -> GSI 11 (level, low) -> IRQ 11 sdhci:slot0: Controller reports > 25 MHz base clock, but no high speed support. mmc0: SDHCI at 0xb3400800 irq 11 DMA ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 9 (level, low) -> IRQ 9 PCI: Setting latency timer of device 0000:00:10.1 to 64 floppy0: no floppy controllers found lp: driver loaded but no devices found SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT0] (battery present) input: Power Button (FF) as /class/input/input4 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input5 ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /class/input/input6 ACPI: Sleep Button (CM) [SLPB] input: Lid Switch as /class/input/input7 ACPI: Lid Switch [LID] No dock devices found. ibm_acpi: ec object not found ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no) ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: multipath: version 1.0.5 loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 1998840k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:1998840k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (3964 buckets, 31712 max) process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead. SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts eth0: no IPv6 routers present Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: HIDP (Human Interface Emulation) ver 1.1 SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts irq 7: nobody cared (try booting with the "irqpoll" option) Call Trace: [] __report_bad_irq+0x30/0x7d [] note_interrupt+0x1bd/0x200 [] handle_level_irq+0xc7/0x104 [] do_IRQ+0xff/0x16d [] default_idle+0x0/0x3d [] ret_from_intr+0x0/0xa [] default_idle+0x29/0x3d [] cpu_idle+0x8c/0xaf [] start_kernel+0x236/0x23b [] _sinittext+0x15c/0x160 handlers: [] (usb_hcd_irq+0x0/0x52) Disabling IRQ #7 device eth0 entered promiscuous mode audit(1174391034.790:4): dev=eth0 prom=256 old_prom=0 auid=4294967295 device eth0 left promiscuous mode audit(1174391191.931:5): dev=eth0 prom=0 old_prom=256 auid=4294967295 psmouse.c: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 5 bytes away. psmouse.c: resync failed, issuing reconnect request device eth0 entered promiscuous mode audit(1174399182.275:6): dev=eth0 prom=256 old_prom=0 auid=4294967295 device eth0 left promiscuous mode audit(1174399191.977:7): dev=eth0 prom=0 old_prom=256 auid=4294967295 eth0: link down. eth0: link up. SoftMAC: ASSERTION FAILED (0) at: net/ieee80211/softmac/ieee80211softmac_wx.c:306:ieee80211softmac_wx_get_rate() SoftMAC: ASSERTION FAILED (0) at: net/ieee80211/softmac/ieee80211softmac_wx.c:306:ieee80211softmac_wx_get_rate() SoftMAC: ASSERTION FAILED (0) at: net/ieee80211/softmac/ieee80211softmac_wx.c:306:ieee80211softmac_wx_get_rate() psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 4 psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse.c: TouchPad at isa0060/serio1/input0 - driver resynched. psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 4 psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse.c: TouchPad at isa0060/serio1/input0 - driver resynched. psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse.c: issuing reconnect request eth0: link down. eth0: link up. eth0: link down. eth0: link up. psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse.c: issuing reconnect request Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000 input: SynPS/2 Synaptics TouchPad as /class/input/input8 psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 4 psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse.c: issuing reconnect request Unable to query Synaptics hardware. Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000 input: SynPS/2 Synaptics TouchPad as /class/input/input9 eth0: link down. eth0: link up. SoftMAC: ASSERTION FAILED (0) at: net/ieee80211/softmac/ieee80211softmac_wx.c:306:ieee80211softmac_wx_get_rate() SoftMAC: ASSERTION FAILED (0) at: net/ieee80211/softmac/ieee80211softmac_wx.c:306:ieee80211softmac_wx_get_rate() SoftMAC: ASSERTION FAILED (0) at: net/ieee80211/softmac/ieee80211softmac_wx.c:306:ieee80211softmac_wx_get_rate() SoftMAC: ASSERTION FAILED (0) at: net/ieee80211/softmac/ieee80211softmac_wx.c:306:ieee80211softmac_wx_get_rate() bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 SoftMAC: Associate: Scanning for networks first. SoftMAC: Associate: failed to initiate scan. Is device up? bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2)