// WIFI

wifi_netmask=255.255.255.0
wifi_proto=static
wifi_ipaddr=192.168.1.130
wifi_ifname=eth1


wl0_akm=none
wl0_infra=1
wl0_ifname=eth1
wl0_mode=wet
wl0_ssid=outpost.bourn.retina
wl0_closed=0
wl0_macmode=disabled
wl0_lazywds=0
wl0_antdiv=-1
wl0_wds=00:09:5b:b9:ef:c3
wl0_wep=disabled
wl0_radio=1
wl0_maclist= 
wl0_channel=10
wl0_crypto=tkip

// LAN

lan_gateway=192.168.123.161
lan_netmask=255.255.255.0
lan_ifnames=vlan0
lan_ipaddr=192.168.123.160
lan_proto=static
lan_ifname=br0


// WAN # disabled for the moment

wan_device=vlan1
wan_proto=static
wan_ifname=vlan1

// output from iwlist eth1 scanning

eth1      Scan completed :
          Cell 01 - Address: 00:09:5B:B9:EF:C3
                    ESSID:"myap"
                    Mode:Master
                    Channel:10
                    Quality:0/0  Signal level:-60 dBm  Noise level:-91 dBm
                    Encryption key:off
                    Bit Rate:1 Mb/s
                    Bit Rate:2 Mb/s
                    Bit Rate:5.5 Mb/s
                    Bit Rate:11 Mb/s
                    Bit Rate:6 Mb/s
                    Bit Rate:9 Mb/s
                    Bit Rate:12 Mb/s
                    Bit Rate:18 Mb/s
                    Bit Rate:24 Mb/s
                    Bit Rate:36 Mb/s
                    Bit Rate:48 Mb/s
                    Bit Rate:54 Mb/s

// what I want to do 

What Im trying to do is use the box to connect the lan wired ports to my ap ( no encryption atm) 
Or
set it as a repeater 
and place it in the center between the client(bad signal) repeater(wrtbox)  ap(netgear wg302)