YAMON ROM Monitor, Revision 02.17mtx1. Copyright (c) 1999-2000 MIPS Technologies, Inc. - All Rights Reserved. For a list of available commands, type 'help'. Compilation time = May 19 2005 14:21:19 MAC address = 00.0e.56.00.03.d8 Processor Company ID = 0x03 Processor ID/revision = 0x02 / 0x02 Endianness = Little CPU = 396 MHz Flash memory size = 32 MByte SDRAM size = 64 MByte First free SDRAM address = 0x8008c8f4 MTX-1 Watchdog support Environment variable 'start' exists. After 4.0 seconds it will be interpreted as a YAMON command and executed. Press Ctrl-C to bypass this. General Purpuse Button is Released YAMON> erase -s Erasing...system... Done YAMON> erase 0xbfd00000 0xf0000 what... The following area will be erased: Start address = 0x1fd00000 Size = 0x00100000 Confirm ? (y/n) y Erasing...Done YAMON> setenv MAC (R/W) 0 bootfile (R/W) bootprot (R/W) tftp bootserport (R/W) tty0 bootserver (R/W) 141.28.228.183 cubeID (USER) 986 ethaddr (R/W) 00.0e.56.00.03.d8 gateway (R/W) 0.0.0.0 ipaddr (R/W) 141.28.228.139 memsize (RO) 0x04000000 modetty0 (RO) 115200,n,8,1,none modetty1 (RO) 115200,n,8,1,none prompt (R/W) YAMON serial (USER) 051218312 start (R/W) go 0xbfd00000 rootfstype=jffs2 root=/dev/mtdblock/0 subnetmask (R/W) 255.255.255.0 YAMON> setenv bootserver 141.28.228.134 YAMON> load /openwrt-au1000-2.6-jffs2-128k.img About to load tftp://141.28.228.134/openwrt-au1000-2.6-jffs2-128k.img Press Ctrl-C to break Error : ARP-timeout, no reponse on ARP-request Hint : Check cable and IP-address of remote host YAMON> load /openwrt-au1000-2.6-jffs2-128k.img About to load tftp://141.28.228.134/openwrt-au1000-2.6-jffs2-128k.img Press Ctrl-C to break ........................................ ........................................ ........................................ ........................................ ........................................ ........................................ ...................... Start = 0xbfd00000, range = (0xbe000000,0xbfdcbf0b), format = SREC YAMON> $start Linux version 2.6.19.2 (andreas@bofh) (gcc version 4.1.2) #1 Sat Mar 24 12:54:31 CET 2007 CPU revision is: 01030202 4G Systems MTX-1 Board (PRId 01030202) @ 396MHZ BCLK switching enabled! Determined physical RAM map: memory: 04000000 @ 00000000 (usable) Initrd not found or empty - disabling initrd Built 1 zonelists. Total pages: 16256 Kernel command line: rootfstype=jffs2 root=/dev/mtdblock/0 console=ttyS0,115200 Primary instruction cache 16kB, physically tagged, 4-way, linesize 32 bytes. Primary data cache 16kB, 4-way, linesize 32 bytes. Synthesized TLB refill handler (17 instructions). Synthesized TLB load handler fastpath (34 instructions). Synthesized TLB store handler fastpath (34 instructions). Synthesized TLB modify handler fastpath (33 instructions). PID hash table entries: 256 (order: 8, 1024 bytes) calculating r4koff... 00182b80(1584000) CPU frequency 396.00 MHz Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 61128k/65536k available (2197k kernel code, 4344k reserved, 310k data, 128k init, 0k highmem) Mount-cache hash table entries: 512 Checking for 'wait' instruction... unavailable. NET: Registered protocol family 16 Generic PHY: Registered new driver NET: Registered protocol family 2 IP route cache hash table entries: 512 (order: -1, 2048 bytes) TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 2048 bind 1024) TCP reno registered squashfs: version 3.0 (2006/03/15) Phillip Lougher Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered (default) MTX-1 System Button driver MTX-1 watchdog driver Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250.8: ttyS0 at MMIO 0x11100000 (irq = 0) is a 16550A serial8250.8: ttyS1 at MMIO 0x11400000 (irq = 3) is a 16550A au1000_eth version 1.6 Pete Popov eth0: Au1xx0 Ethernet found at 0x11500000, irq 28 au1000_eth_mii: probed eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:00, irq=-1) MTX-1 flash: Found 2 x16 devices at 0x0 in 32-bit bank Amd/Fujitsu Extended Query Table at 0x0040 MTX-1 flash: CFI does not contain boot bank location. Assuming top. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. Creating 4 MTD partitions on "MTX-1 flash": 0x00000000-0x01c00000 : "filesystem" 0x01c00000-0x01d00000 : "yamon" 0x01d00000-0x01fc0000 : "kernel" 0x01fc0000-0x02000000 : "yamon env" Registered led device: mtx1:green Registered led device: mtx1:red ip_conntrack version 2.4 (512 buckets, 4096 max) - 240 bytes per conntrack ip_tables: (C) 2000-2006 Netfilter Core Team TCP vegas registered NET: Registered protocol family 1 NET: Registered protocol family 17 Bridge firewalling registered 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller No filesystem could mount root, tried: <6>Time: MIPS clocksource has been installed. jffs2 Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)