# amanda.conf - sample Amanda configuration file. See amanda.conf(5) for 
# details

org 	 "DailySet1"	# your organization name for reports
mailto 	 "my@mail.com"	# space separated list of operators at your site
dumpuser "root"	# the user to run dumps under

inparallel 4		# maximum dumpers that will run in parallel (max 63)
			# this maximum can be increased at compile-time,
			# modifying MAX_DUMPERS in server-src/driverio.h
dumporder "sssS"	# specify the priority order of each dumper
			#   s -> smallest size
			#   S -> biggest size
			#   t -> smallest time
			#   T -> biggest time
			#   b -> smallest bandwitdh
			#   B -> biggest bandwitdh
			# try "BTBTBTBTBTBT" if you are not holding
			# disk constrained

taperalgo first		# The algorithm used to choose which dump image to send
			# to the taper.
			# Possible values: 
		        # [first|firstfit|largest|largestfit|smallest|last]
			# Default: first. 
			# first		First in - first out.
			# firstfit 	The first dump image that will fit 
                        #               on the current tape.
			# largest 	The largest dump image.
			# largestfit 	The largest dump image that will fit 
                        #               on the current tape.
			# smallest 	The smallest dump image.
			# last 		Last in - first out.

displayunit "m"		# Possible values: "k|m|g|t"
			# Default: k. 
			# The unit used to print many numbers.
			# k=kilo, m=mega, g=giga, t=tera
			
netusage  800 Kbps	# maximum net bandwidth for Amanda, in KB per sec

dumpcycle 4 weeks	# the number of days in the normal dump cycle
runspercycle 20         # the number of amdump runs in dumpcycle days
			# (4 weeks * 5 amdump runs per week -- just weekdays)
tapecycle 25 tapes	# the number of tapes in rotation
			# 4 weeks (dumpcycle) times 5 tapes per week (just
			# the weekdays) plus a few to handle errors that
			# need amflush and so we do not overwrite the full
			# backups performed at the beginning of the previous
			# cycle

bumpsize 20 Mb		# minimum savings (threshold) to bump level 1 -> 2
bumppercent 20		# minimum savings (threshold) to bump level 1 -> 2
bumpdays 1		# minimum days at each level
bumpmult 4		# threshold = bumpsize * bumpmult^(level-1)

etimeout 300		# number of seconds per filesystem for estimates.
dtimeout 1800		# number of idle seconds before a dump is aborted.
ctimeout 30		# maximum number of seconds that amcheck waits
			# for each client host
 
tapebufs 20             # A positive integer telling taper how many 
                        # 32k buffers to allocate.  The default is 20 (640k).

# By default, Amanda can only track at most one run per calendar day. When
# the usetimestamps option is enabled, however, Amanda can track as many
# runs as you care to make.
# WARNING: This option is not backward-compatible. Do not enable it if you
#          intend to downgrade your server installation to Amanda community 
#          edition 2.5
usetimestamps yes

runtapes 1			# number of tapes to be used in a single run of amdump
#tpchanger "chg-manual"		# the tape-changer glue script
#tapedev ""	# the no-rewind tape device to be used
tapedev "file:/backup/amanda"
#rawtapedev "/dev/null"	# the raw device to be used (ftape only)

maxdumpsize -1		# Maximum number of bytes the planner will schedule
			# for a run (default: runtapes * tape_length).
#tapetype HP-DAT		# what kind of tape it is (see tapetypes below)
tapetype DVD47G
#labelstr "^DailySet1-[0-9][0-9]*$"	# label constraint regex: all tapes must match
labelstr "^daily-[0-9][0-9]*$"   # label constraint regex: all tapes must match


amrecover_do_fsf yes		# amrecover will call amrestore with the
				# -f flag for faster positioning of the tape.
amrecover_check_label yes	# amrecover will call amrestore with the
				# -l flag to check the label.
amrecover_changer ""	# amrecover will use the changer if you restore
				# from this device.
				# It could be a string like 'changer' and
				# amrecover will use your changer if you
				# set your tape with 'settape changer'


holdingdisk hd1 {
    comment "main holding disk"
    directory "/backup/amanda"	# where the holding disk is
    use -100 Mb			# how much space can we use on it
				# a non-positive value means:
				# use all space but that value
    chunksize 1Gb 	# size of chunk if you want big dump to be
			# dumped on multiple files on holding disks
			#  N Kb/Mb/Gb split images in chunks of size N
			#	      The maximum value should be
			#	      (MAX_FILE_SIZE - 1Mb)
			#  0          same as INT_MAX bytes
    }

autoflush no #
infofile "/usr/local/etc/amanda/DailySet1/curinfo"	# database DIRECTORY
logdir   "/usr/local/etc/amanda/DailySet1"		# log directory
indexdir "/usr/local/etc/amanda/DailySet1/index"		# index directory

define dumptype global {
    comment "Global definitions"
    # This is quite useful for setting global parameters, so you don't have
    # to type them everywhere.  All dumptype definitions in this sample file
    # do include these definitions, either directly or indirectly.
    # There's nothing special about the name `global'; if you create any
    # dumptype that does not contain the word `global' or the name of any
    # other dumptype that contains it, these definitions won't apply.
    # Note that these definitions may be overridden in other
    # dumptypes, if the redefinitions appear *after* the `global'
    # dumptype name.
    # You may want to use this for globally enabling or disabling
    # indexing, recording, etc.  Some examples:
    # index yes
    # record no
    # split_diskbuffer "/raid/amanda"
    # fallback_splitsize 64m
}

define dumptype always-full {
    global
    comment "Full dump of this filesystem always"
    compress none
    priority high
    dumpcycle 0
}

# Dumptypes for gnutar
define dumptype root-tar {
    global
    program "GNUTAR"
    comment "root partitions dumped with tar"
    compress none
    index
#   exclude list "/usr/local/etc/amanda/exclude.gtar"
    priority low
}

define dumptype user-tar {
    root-tar
    comment "user partitions dumped with tar"
    priority medium
}

define dumptype user-tar-span {
    root-tar
    tape_splitsize 3 Gb
    comment "tape-spanning user partitions dumped with tar"
    priority medium
}

define dumptype high-tar {
    root-tar
    comment "partitions dumped with tar"
    priority high
}

define dumptype comp-root-tar {
    root-tar
    comment "Root partitions with compression"
    compress client fast
}

define dumptype comp-user-tar {
    user-tar
    compress client fast
}

define dumptype comp-user-tar-span {
    user-tar-span
    compress client fast
}

define dumptype holding-disk {
    global
    comment "The master-host holding disk itself"
    holdingdisk never # do not use the holding disk
    priority medium
}

define dumptype comp-user {
    global
    comment "Non-root partitions on reasonably fast machines"
    compress client fast
    priority medium
}

define dumptype comp-user-span {
    global
    tape_splitsize 5 Gb
    comment "Tape-spanning non-root partitions on reasonably fast machines"
    compress client fast
    priority medium
}

define dumptype nocomp-user {
    comp-user
    comment "Non-root partitions on slow machines"
    compress none
}

define dumptype nocomp-user-span {
    comp-user-span
    comment "Tape-spanning non-root partitions on slow machines"
    compress none
}

define dumptype comp-root {
    global
    comment "Root partitions with compression"
    compress client fast
    priority low
}

define dumptype nocomp-root {
    comp-root
    comment "Root partitions without compression"
    compress none
}

define dumptype comp-high {
    global
    comment "very important partitions on fast machines"
    compress client best
    priority high
}

define dumptype nocomp-high {
    comp-high
    comment "very important partitions on slow machines"
    compress none
}

define dumptype nocomp-test {
    global
    comment "test dump without compression, no /etc/dumpdates recording"
    compress none
    record no
    priority medium
}

define dumptype comp-test {
    nocomp-test
    comment "test dump with compression, no /etc/dumpdates recording"
    compress client fast
}

define dumptype custom-compress {
   global
   program "GNUTAR"
   comment "custom client compression dumped with tar"
   compress client custom
   client_custom_compress "/usr/bin/bzip2"
}

define dumptype server-encrypt-fast {
   global
   program "GNUTAR"
   comment "fast client compression and server symmetric encryption"
   compress client fast
   encrypt server
   server_encrypt "/usr/sbin/amcrypt"
   server_decrypt_option "-d"
}

define dumptype client-encrypt-nocomp {
   global
   program "GNUTAR"
   comment "no compression and client symmetric encryption"
   compress none
   encrypt client
   client_encrypt "/usr/sbin/amcrypt"
   client_decrypt_option "-d"
}


# To use gpg public-key encryption, gpg does compress with zlib by default.
# Thus, no need to specify compress

#define dumptype gpg-encrypt {
#    global
#    program "GNUTAR"
#    comment "server public-key encryption, dumped with tar"
#    compress none
#    encrypt server
#    server_encrypt "/usr/sbin/amgpgcrypt"
#    server_decrypt_option "-d"
#}


# network interfaces
#
# These are referred to by the disklist file.  They define the attributes
# of the network interface that the remote machine is accessed through.
# Notes: - netusage above defines the attributes that are used when the
#          disklist entry doesn't specify otherwise.
#        - the values below are only samples.
#        - specifying an interface does not force the traffic to pass
#          through that interface.  Your OS routing tables do that.  This
#          is just a mechanism to stop Amanda trashing your network.
# Attributes are:
#	use		- bandwidth above which amanda won't start
#			  backups using this interface.  Note that if
#			  a single backup will take more than that,
#			  amanda won't try to make it run slower!

define interface local {
    comment "a local disk"
    use 1000 kbps
}

define interface le0 {
    comment "10 Mbps ethernet"
    use 400 kbps
}

define tapetype DVD47G {
     length 4350 MB
     filemark 4KB
}


# You may include other amanda configuration files, so you can share
# dumptypes, tapetypes and interface definitions among several
# configurations.

#includefile "/usr/local/etc/amanda/amanda.conf.main"